{"product_id":"royal-enfield-classic-350-500-pillion-holder-kit-kau00003-a","title":"Royal Enfield Classic 350 \u0026 Classic 500 Pillion Holder Kit – Rear Passenger Seat Handle with Fittings – KAU00003\/A Genuine OEM","description":"\u003ch2\u003eGenuine Royal Enfield Classic Pillion Holder Kit – KAU00003\/A\u003c\/h2\u003e\n\u003cp\u003eReplacing a missing, loose or damaged rear passenger-seat holder on an older Royal Enfield Classic? This genuine Royal Enfield kit brings together the pillion handle and its specified fastening-part references. Designed for the traditional Classic 350 and Classic 500 seat arrangement, it is the OEM-part-number route to restoring the correct pillion seat retaining\/holding hardware, subject to matching the motorcycle’s VIN and seat assembly.\u003c\/p\u003e\n\u003cp\u003eThe kit is catalogued as “PILLION HOLDER KIT CLASSIC 350 \u0026amp; 500”. The pillion handle is a specific seat-area part; do not confuse it with a rear luggage carrier, side grab rail, backrest, or passenger footrest.\u003c\/p\u003e\n\u003ch2\u003eProduct identification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRoyal Enfield – Genuine OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit SKU\u003c\/td\u003e\n\u003ctd\u003eKAU00003\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM description\u003c\/td\u003e\n\u003ctd\u003ePILLION HOLDER KIT CLASSIC 350 \u0026amp; 500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuyer description\u003c\/td\u003e\n\u003ctd\u003eClassic 350 \/ Classic 500 pillion seat holder handle and fittings kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eOlder Classic 350 and Classic 500 seat arrangement, VIN\/EPC dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocation\u003c\/td\u003e\n\u003ctd\u003eRear passenger \/ pillion seat holding arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\/finish\u003c\/td\u003e\n\u003ctd\u003eVerify against genuine packet and motorcycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSelling unit\u003c\/td\u003e\n\u003ctd\u003e1 × KAU00003\/A genuine OEM kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoose-component counts\u003c\/td\u003e\n\u003ctd\u003eNot independently verified for the sealed retail kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOEM component breakdown\u003c\/h2\u003e\n\u003cp\u003eThe following five component references are supplied in the kit breakdown. This identifies the component types, not the exact number of each fastener in the retail packet. Before dispatch, match the sealed package against the genuine kit list.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eQuantity in retail kit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e591197\/D\u003c\/td\u003e\n\u003ctd\u003ePillion handle \/ passenger-seat holding handle\u003c\/td\u003e\n\u003ctd\u003eNot verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e591577\/C\u003c\/td\u003e\n\u003ctd\u003eFlanged hex bolt, M6 × 1 × 27\u003c\/td\u003e\n\u003ctd\u003eNot verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e591578\/A\u003c\/td\u003e\n\u003ctd\u003eFlanged hex bolt, M6 × 1 × 35\u003c\/td\u003e\n\u003ctd\u003eNot verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e586021\/B\u003c\/td\u003e\n\u003ctd\u003eHexagonal nut, M6 × 1\u003c\/td\u003e\n\u003ctd\u003eNot verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e586032\/B\u003c\/td\u003e\n\u003ctd\u003eWasher\u003c\/td\u003e\n\u003ctd\u003eNot verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat this kit is – and what it is not\u003c\/h2\u003e\n\u003cp\u003eThis is a seat-area pillion holder\/handle service kit for the older Classic range. It is not a full pillion seat assembly, seat cushion, rear seat base, rear grab rail, backrest, carrier rack, sissy bar, or footrest kit. Do not assume it includes any component other than those listed in the OEM breakdown.\u003c\/p\u003e\n\u003ch2\u003eMotorcycle compatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMotorcycle\u003c\/th\u003e\n\u003cth\u003eFitment guidance\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoyal Enfield Classic 350 – older UCE generation\u003c\/td\u003e\n\u003ctd\u003eListed by the genuine-parts kit catalogue for the Classic 350 family; check seat layout and VIN-specific EPC.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoyal Enfield Classic 500 – older UCE\/EFI generation\u003c\/td\u003e\n\u003ctd\u003eListed by the genuine-parts kit catalogue; the handle family is also represented in Classic 500 seat diagrams. Check specific seat arrangement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment requires verification\u003c\/h3\u003e\n\u003cp\u003eSeat styles, accessory pillion seats, aftermarket conversions, single-seat builds and model-year changes can alter the mounting arrangement. Confirm the existing pillion-handle design and the VIN-specific illustrated seat assembly before ordering.\u003c\/p\u003e\n\u003ch3\u003eDo not order by resemblance alone\u003c\/h3\u003e\n\u003cp\u003eDo not assume this kit fits the Classic 350 Reborn\/J-Series, Classic 650, Bullet 350 J-Series, Meteor 350, Hunter 350, Interceptor 650, or Continental GT 650. Fitment of these separate generations is not established by the KAU00003\/A references.\u003c\/p\u003e\n\u003ch2\u003eWhy use the correct genuine holder kit?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIdentifiable by one Royal Enfield kit number instead of mixing unrelated loose parts.\u003c\/li\u003e\n\u003cli\u003eIncludes OEM references for the handle and related M6 fastener families.\u003c\/li\u003e\n\u003cli\u003eSupports part-number-specific repair of the pillion seat retention\/holder arrangement.\u003c\/li\u003e\n\u003cli\u003eHelps avoid choosing visually similar but incorrectly dimensioned or threaded bolts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePart numbers and revision caution\u003c\/h2\u003e\n\u003cp\u003eThe specified handle is 591197\/D. Older catalogue entries for the handle family show 591197\/C as replaced by \/D. However, bolt 591577\/C may also appear in catalogues with a later service reference 591577\/D; the later revision has inconsistent published dimensional wording. This product is KAU00003\/A and its supplied breakdown specifies 591577\/C. Do not substitute a newer revision or generic hardware without verifying the actual kit and application.\u003c\/p\u003e\n\u003ch2\u003eInstallation and replacement guidance\u003c\/h2\u003e\n\u003cp\u003eInspect the seat bracket, frame mounting locations, existing fasteners, washers, threads and the pillion-seat retaining arrangement before fitting. If replacing damaged components, check for distorted mounting points as well as a broken handle. Fit the correct bolts in their specified positions; different lengths must not be interchanged simply because the thread size is the same. Use the correct Royal Enfield workshop specification for tightening; no unsupported torque value is provided here. A qualified technician is recommended where seat retention or fastener condition is uncertain.\u003c\/p\u003e\n\u003ch2\u003eWhat you receive\u003c\/h2\u003e\n\u003cp\u003e1 × Genuine Royal Enfield KAU00003\/A Pillion Holder Kit. The OEM breakdown identifies a pillion handle, two flanged-hex-bolt references, an M6 nut reference and a washer reference. Individual loose-piece quantities and any factory pre-assembly must be confirmed against the sealed genuine packet. Pillion seat, backrest, luggage rack and any unlisted hardware are not included by description.\u003c\/p\u003e\n\u003ch2\u003eBefore you buy\u003c\/h2\u003e\n\u003cp\u003eCompare KAU00003\/A and the component references with your original seat hardware and VIN-specific Royal Enfield EPC. The correct part is determined by the motorcycle’s actual seat arrangement, not merely the words “Classic 350” or “Classic 500”. Confirm physical packet contents before fitting.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich bikes is KAU00003\/A intended for?\u003c\/h3\u003e\n\u003cp\u003eThe genuine-parts catalogue lists this pillion holder kit for older Classic 350 and Classic 500 motorcycles. Confirm the exact seat assembly and VIN.\u003c\/p\u003e\n\u003ch3\u003eWill it fit the new Classic 350 Reborn?\u003c\/h3\u003e\n\u003cp\u003eFitment to the J-Series \/ Reborn Classic 350 has not been established. Do not order solely on the Classic name.\u003c\/p\u003e\n\u003ch3\u003eIs this the pillion seat itself?\u003c\/h3\u003e\n\u003cp\u003eNo. It is the holder\/handle-related kit, not the cushion or complete passenger seat.\u003c\/p\u003e\n\u003ch3\u003eIs the part a rear passenger grab rail or luggage carrier?\u003c\/h3\u003e\n\u003cp\u003eNo. It is catalogued as a pillion holder kit. Do not confuse it with a luggage rack, grab-rail conversion or backrest.\u003c\/p\u003e\n\u003ch3\u003eWhich handle comes in this kit?\u003c\/h3\u003e\n\u003cp\u003eThe supplied breakdown identifies handle reference 591197\/D.\u003c\/p\u003e\n\u003ch3\u003eAre bolts included?\u003c\/h3\u003e\n\u003cp\u003eThe breakdown lists bolts 591577\/C and 591578\/A, but exact retail quantities require packet confirmation.\u003c\/p\u003e\n\u003ch3\u003eAre nuts and washers included?\u003c\/h3\u003e\n\u003cp\u003eThe breakdown lists nut 586021\/B and washer 586032\/B; the number of loose pieces is unverified.\u003c\/p\u003e\n\u003ch3\u003eCan I install generic M6 bolts?\u003c\/h3\u003e\n\u003cp\u003eNot without confirming length, grade, positioning and the OEM seat arrangement. Thread diameter alone does not establish interchangeability.\u003c\/p\u003e\n\u003ch3\u003eDoes it suit single-seat conversions?\u003c\/h3\u003e\n\u003cp\u003eNot automatically. Check the installed passenger-seat\/holder arrangement and mounting points.\u003c\/p\u003e\n\u003ch3\u003eIs this genuine Royal Enfield?\u003c\/h3\u003e\n\u003cp\u003eKAU00003\/A is catalogued as a genuine Royal Enfield pillion holder kit.\u003c\/p\u003e\n\u003ch3\u003eDoes it include a pillion backrest or footrests?\u003c\/h3\u003e\n\u003cp\u003eNeither is included in the supplied OEM component breakdown.\u003c\/p\u003e\n\u003ch3\u003eHow do I avoid ordering the wrong kit?\u003c\/h3\u003e\n\u003cp\u003eCheck VIN\/EPC, inspect the original holder and mounting points, and compare exact component numbers before ordering.\u003c\/p\u003e\n\u003ch2\u003eOrder and claims guidance\u003c\/h2\u003e\n\u003cp\u003ePlease check suitability before purchase. Correctly supplied spare parts are generally not returnable for incorrect selection or diagnosis. For wrong, damaged or missing-item claims, retain a complete unboxing video and contact Under The Hood within 24 hours of delivery, subject to applicable consumer rights and store policy.\u003c\/p\u003e","brand":"Royal Enfield","offers":[{"title":"Default Title","offer_id":52488376910119,"sku":"KAU00003\/A","price":0.0,"currency_code":"INR","in_stock":false}],"url":"https:\/\/underthehood.co.in\/products\/royal-enfield-classic-350-500-pillion-holder-kit-kau00003-a","provider":"UNDER THE HOOD","version":"1.0","type":"link"}