{"product_id":"royal-enfield-himalayan-411-scram-411-hand-grip-set-kab00024-a","title":"Royal Enfield Himalayan 411 \u0026 Scram 411 Hand Grip Set – LH + RH Throttle Grip – KAB00024\/A Genuine OEM","description":"\u003cp\u003e\u003cstrong\u003eRestore your original Royal Enfield handlebar grip arrangement with the genuine KAB00024\/A hand grip set.\u003c\/strong\u003e This OEM kit is identified for the Himalayan 411 and Scram 411, supplying the left-hand grip and the matching right-hand throttle-side grip component. The correct RH throttle-side fitment is particularly important: a similar-looking rubber grip from another Royal Enfield motorcycle does not establish interchangeability.\u003c\/p\u003e\n\u003ch2\u003eExact Part Identification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRoyal Enfield genuine OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit part number\u003c\/th\u003e\n\u003ctd\u003eKAB00024\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM kit name\u003c\/th\u003e\n\u003ctd\u003eHAND GRIP SET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeft-side part\u003c\/th\u003e\n\u003ctd\u003e587317\/A – HAND GRIP LH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRight-side part\u003c\/th\u003e\n\u003ctd\u003e587318\/A – GRIP COMP. THROTTLE RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eHimalayan 411 \/ Scram 411; verify exact OEM part references against the motorcycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eOEM grip design; check current package for appearance and pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat Is Included in the Kit\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOEM component number\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eSide\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e587317\/A\u003c\/td\u003e\n\u003ctd\u003eHand Grip\u003c\/td\u003e\n\u003ctd\u003eLeft (non-throttle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e587318\/A\u003c\/td\u003e\n\u003ctd\u003eGrip Component, Throttle\u003c\/td\u003e\n\u003ctd\u003eRight (throttle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe kit is supplied under one genuine Royal Enfield kit number KAB00024\/A. Its OEM breakdown identifies these two component references. The Himalayan handlebar EPC shows one LH grip and one RH grip used on a motorcycle. Check the sealed retail packet for final piece counts; the catalogue quantity is not independently verified as the sealed-package count.\u003c\/p\u003e\n\u003ch2\u003eConfirmed and Supported Motorcycle Fitment\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMotorcycle\u003c\/th\u003e\n\u003cth\u003eEvidence and purchasing check\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoyal Enfield Himalayan 411 – Euro 4 \/ BS4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBoth exact grip numbers are identified in the model handlebar EPC.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoyal Enfield Himalayan 411 – later BS6 configurations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBoth exact grip numbers appear in a 2022 BS6 handlebar parts listing; check original handlebar\/throttle setup.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRoyal Enfield Scram 411\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExact KAB00024\/A kit advertised for Scram 411 by independent Royal Enfield spares sellers; match both grips and RH throttle arrangement before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eFor bikes with modified handlebars, aftermarket throttle tubes, heated grips, handguard adapters or other non-standard controls, verify the original component numbers and physical mounting arrangement before purchase.\u003c\/p\u003e\n\u003ch2\u003eNot Established \/ Do Not Order Solely by Appearance\u003c\/h2\u003e\n\u003cp\u003eThis kit is \u003cstrong\u003enot verified\u003c\/strong\u003e for Himalayan 450, Guerrilla 450, Scram 440, Classic 350 Reborn, Meteor 350, Hunter 350, Bullet 350, Continental GT 650, Interceptor 650 or other models. Similar handlebar diameter does not prove that the \u003cstrong\u003eRH throttle grip component 587318\/A\u003c\/strong\u003e fits.\u003c\/p\u003e\n\u003ch2\u003eWhy the RH Throttle Grip Controls Fitment\u003c\/h2\u003e\n\u003cp\u003eThe left-hand grip is installed on the stationary handlebar end. The right-hand component fits at the throttle control and must be compatible with the exact throttle tube\/control assembly. The suitability of \u003cstrong\u003eboth\u003c\/strong\u003e 587317\/A and 587318\/A is necessary for this complete kit to be appropriate. A motorcycle using only the LH part is not enough to claim kit compatibility.\u003c\/p\u003e\n\u003ch2\u003eWhat This Kit Is — and Is Not\u003c\/h2\u003e\n\u003cp\u003eThis is an OEM hand grip replacement kit intended to restore the original LH and RH handgrip configuration. It is \u003cstrong\u003enot\u003c\/strong\u003e a complete handlebar, a throttle cable kit, a switch-module set, a grip heater, a bar-end weight set or a control-housing assembly. The supplied BOM does not separately list throttle cables, sleeves\/tubes, adhesives, bolts or bar-end fittings; do not assume those additional items are included.\u003c\/p\u003e\n\u003ch2\u003eWhen to Replace the Grips\u003c\/h2\u003e\n\u003cp\u003eConsider replacement when the rubber is torn, slippery, deteriorated, loose or damaged, or when the original throttle-side grip no longer operates correctly. A stiff or non-returning throttle can have other causes, such as cable adjustment, damaged cable or control interference; inspect and diagnose the full mechanism rather than assuming a replacement grip alone will resolve the fault.\u003c\/p\u003e\n\u003ch2\u003eInstallation and Safety Guidance\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eCheck the existing left grip and RH throttle-side control against the exact OEM references before removal.\u003c\/li\u003e\n\u003cli\u003eRemove bar-end accessories or handguards only as required by the correct service procedure.\u003c\/li\u003e\n\u003cli\u003eInspect the throttle mechanism and cable routing for wear, damage or obstructions.\u003c\/li\u003e\n\u003cli\u003eFit both grips using the motorcycle-specific workshop method; do not force the RH part onto an incompatible throttle assembly.\u003c\/li\u003e\n\u003cli\u003eWith the engine off, turn the handlebar fully left and right, twist and release the throttle and verify free movement and a positive return at all steering positions.\u003c\/li\u003e\n\u003cli\u003eHave a qualified motorcycle technician carry out fitting if the throttle-side arrangement is uncertain.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eNo tightening torque or lubricant\/adhesive method is specified here without an exact workshop reference.\u003c\/p\u003e\n\u003ch2\u003eBefore You Order\u003c\/h2\u003e\n\u003cp\u003eCompare your motorcycle model, model year, handlebar controls and existing grip part numbers. Check whether any previous owner installed aftermarket throttle hardware. For an exact-fit question, use the motorcycle VIN and current Royal Enfield EPC. Correctly supplied genuine spare parts cannot be treated as interchangeable simply because their rubber shape looks similar.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eIs this the genuine Royal Enfield kit?\u003c\/h3\u003e\u003cp\u003eYes. The genuine kit reference is KAB00024\/A, identified as HAND GRIP SET.\u003c\/p\u003e\u003ch3\u003eWhich two OEM parts does it contain?\u003c\/h3\u003e\u003cp\u003eThe supplied OEM breakdown lists 587317\/A (LH) and 587318\/A (RH throttle-side grip component).\u003c\/p\u003e\u003ch3\u003eDoes this fit Himalayan 411 BS4?\u003c\/h3\u003e\u003cp\u003eYes; both component numbers are documented in the Himalayan 411 Euro 4 handlebar catalogue.\u003c\/p\u003e\u003ch3\u003eDoes it fit Himalayan 411 BS6?\u003c\/h3\u003e\u003cp\u003eThe exact LH and RH part numbers are both listed in a Himalayan 411 BS6 handlebar reference. Confirm your original controls and VIN.\u003c\/p\u003e\u003ch3\u003eDoes it fit Scram 411?\u003c\/h3\u003e\u003cp\u003eIndependent genuine-spares sellers list complete KAB00024\/A for Scram 411. Match the RH throttle-side control and both grip numbers before ordering.\u003c\/p\u003e\u003ch3\u003eDoes it fit Himalayan 450?\u003c\/h3\u003e\u003cp\u003eNot established. The Himalayan 450 uses a different platform; do not order based on the Himalayan name alone.\u003c\/p\u003e\u003ch3\u003eDoes it fit Scram 440?\u003c\/h3\u003e\u003cp\u003eNot established. Scram 411 compatibility does not automatically transfer to Scram 440.\u003c\/p\u003e\u003ch3\u003eCan I use it for Hunter 350, Meteor 350 or Classic 350?\u003c\/h3\u003e\u003cp\u003eNot verified for these models. Compare their correct grip and throttle-control OEM references instead.\u003c\/p\u003e\u003ch3\u003eIs the right grip the throttle grip?\u003c\/h3\u003e\u003cp\u003eYes. The BOM calls 587318\/A GRIP COMP. THROTTLE RH.\u003c\/p\u003e\u003ch3\u003eIs the left grip also sold separately?\u003c\/h3\u003e\u003cp\u003e587317\/A is the individual LH OEM component reference; separate availability depends on stock.\u003c\/p\u003e\u003ch3\u003eDoes the kit include a new throttle cable or switches?\u003c\/h3\u003e\u003cp\u003eNo such components appear in the supplied kit breakdown; they must not be assumed included.\u003c\/p\u003e\u003ch3\u003eDoes one kit contain exactly two retail pieces?\u003c\/h3\u003e\u003cp\u003eThe OEM breakdown names an LH and an RH component and the EPC uses one of each on the motorcycle. Confirm the sealed packet quantity before dispatch.\u003c\/p\u003e\u003ch3\u003eWill replacing the grip fix a sticky throttle?\u003c\/h3\u003e\u003cp\u003eNot necessarily. A sticking throttle can involve cables, tube, housing or interference; diagnose before replacement.\u003c\/p\u003e\u003ch3\u003eShould a mechanic install this?\u003c\/h3\u003e\u003cp\u003eProfessional installation is advisable if you are unsure about throttle-control disassembly or throttle return checks.\u003c\/p\u003e\n\u003ch2\u003eRelated Components to Check\u003c\/h2\u003e\n\u003cp\u003eWhen working on the handlebars, also inspect throttle cables, grip end weights, handlebar controls, handguards and the throttle housing as applicable. These are separate parts and are not included unless specifically listed on the genuine packet.\u003c\/p\u003e\n\u003ch2\u003eOrdering and Claims Information\u003c\/h2\u003e\n\u003cp\u003eCheck fitment and the exact part references before placing your order. Correctly supplied parts are generally not returnable for wrong selection, incorrect diagnosis or change of mind after processing. For any wrong-item, damaged-item or missing-item claim, retain a complete unboxing video and contact Under The Hood within 24 hours of delivery, in accordance with store policy.\u003c\/p\u003e","brand":"Royal Enfield","offers":[{"title":"Default Title","offer_id":52487074382119,"sku":"KAB00024\/A","price":0.0,"currency_code":"INR","in_stock":false}],"url":"https:\/\/underthehood.co.in\/products\/royal-enfield-himalayan-411-scram-411-hand-grip-set-kab00024-a","provider":"UNDER THE HOOD","version":"1.0","type":"link"}