{"product_id":"royal-enfield-j-series-350-bar-end-mirror-mounts-kxa00125","title":"Royal Enfield Meteor Classic Hunter Bullet 350 Bar-End Mirror Mounts KXA00125","description":"\u003ch1\u003eRoyal Enfield Meteor, Classic, Hunter \u0026amp; Bullet 350 Bar-End Mirror Mounts – KXA00125\u003c\/h1\u003e\n\n\u003cp\u003eInstall compatible genuine Royal Enfield bar-end mirrors correctly on the J-Series 350 handlebar with this genuine mounting kit. Part number \u003cstrong\u003eKXA00125\u003c\/strong\u003e replaces the motorcycle’s original bar-end finishers and provides the proper machined clamping surface required by the mirrors.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the \u003cstrong\u003emounting adapters and supplied fasteners only\u003c\/strong\u003e. Bar-end mirrors— including genuine mirror set \u003cstrong\u003e1990401\u003c\/strong\u003e—are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eWhat This Product Is\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Royal Enfield Bar End Mirror Mounting Kit\u003c\/li\u003e\n\u003cli\u003eExact accessory part number \/ MPN: \u003cstrong\u003eKXA00125\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrecision-machined stainless-steel mounting adapters\u003c\/li\u003e\n\u003cli\u003eReplaces the original handlebar-end finishers on compatible motorcycles\u003c\/li\u003e\n\u003cli\u003eProvides the correct mounting surface for compatible bar-end mirrors\u003c\/li\u003e\n\u003cli\u003eDesigned as a bolt-on accessory using the included application-specific fasteners\u003c\/li\u003e\n\u003cli\u003eNormal published installation time: approximately 15 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAllows genuine bar-end mirrors to clamp securely to the J-Series 350 handlebar ends\u003c\/li\u003e\n\u003cli\u003eMaintains a clean factory-accessory installation\u003c\/li\u003e\n\u003cli\u003eAvoids makeshift spacers and universal expanding adapters\u003c\/li\u003e\n\u003cli\u003eSupplies both left- and right-side mounts\u003c\/li\u003e\n\u003cli\u003eIncludes the two specified fastener styles used by the fitting system\u003c\/li\u003e\n\u003cli\u003eCan be removed later if the motorcycle is returned to its original mirror arrangement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConfirmed Compatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRoyal Enfield Model\u003c\/th\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003cth\u003eFitment Requirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeteor 350\u003c\/td\u003e\n\u003ctd\u003eJ-Series, 2021 onward\u003c\/td\u003e\n\u003ctd\u003eRequired when fitting compatible genuine bar-end mirrors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassic 350 Reborn\u003c\/td\u003e\n\u003ctd\u003eJ-Series, 2021 onward\u003c\/td\u003e\n\u003ctd\u003eRequired when fitting compatible genuine bar-end mirrors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHunter 350\u003c\/td\u003e\n\u003ctd\u003eJ-Series, 2022 onward\u003c\/td\u003e\n\u003ctd\u003eRequired when fitting compatible genuine bar-end mirrors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBullet 350\u003c\/td\u003e\n\u003ctd\u003eNew J-Series generation, 2023 onward\u003c\/td\u003e\n\u003ctd\u003eRequired when fitting compatible genuine bar-end mirrors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eModel years are a general production guide and can differ by country or registration date. Confirm the handlebar-end construction, exact mirror kit and VIN-specific accessory instructions before opening the package.\u003c\/p\u003e\n\n\u003ch2\u003eNot Automatically Compatible With\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOlder UCE Classic 350\/500, Bullet 350\/500 or Electra models\u003c\/li\u003e\n\u003cli\u003eThunderbird, Thunderbird X or Himalayan 411\u003c\/li\u003e\n\u003cli\u003eInterceptor 650 or Continental GT 650—the KXA00125 adapter is not normally required for the standard 1990401 installation on these models\u003c\/li\u003e\n\u003cli\u003eSuper Meteor 650, Shotgun 650, Classic 650 or Bear 650, which can use different mounting adapters\u003c\/li\u003e\n\u003cli\u003eHimalayan 450, Guerrilla 450, Scram 440 or other models using a different bar-end system\u003c\/li\u003e\n\u003cli\u003eUniversal or third-party mirrors whose clamp diameter and fixing arrangement have not been matched\u003c\/li\u003e\n\u003cli\u003eAftermarket handlebars, altered internal weights or previously modified bar ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachined bar-end mirror mounting adapters\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountersunk M6 × 40 mm fixings\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap-head M6 × 40 mm fixings\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation instructions \/ packaging, where supplied\u003c\/td\u003e\n\u003ctd\u003eAs factory packed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eThe fitting instructions determine which supplied fixing is used for the motorcycle and mirror configuration. Do not assume that every loose fastener in the kit must be installed.\u003c\/p\u003e\n\n\u003ch2\u003eNot Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBar-end mirrors, including part number 1990401\u003c\/li\u003e\n\u003cli\u003eOriginal-style stem mirrors\u003c\/li\u003e\n\u003cli\u003eMirror-hole blanking plugs\u003c\/li\u003e\n\u003cli\u003eHandlebar, grips, throttle tube or switchgear\u003c\/li\u003e\n\u003cli\u003eReplacement bar-end weights not listed in the kit\u003c\/li\u003e\n\u003cli\u003eWorkshop tools or installation labour\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRoyal Enfield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eKXA00125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBar-end mirror mounting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Quantity\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastener Size\u003c\/td\u003e\n\u003ctd\u003eM6 × 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Mirror Reference\u003c\/td\u003e\n\u003ctd\u003e1990401, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished Fitting Time\u003c\/td\u003e\n\u003ctd\u003eApproximately 15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eReplaces original bar-end finishers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eHow the Mounting Kit Works\u003c\/h2\u003e\n\u003cp\u003eThe original handlebar-end finisher is removed from each side. A KXA00125 adapter is positioned inside the compatible bar-end mirror to create the correct flange and clamping surface. The mirror and adapter are then secured to the handlebar end using the fixing specified for that application.\u003c\/p\u003e\n\n\u003cp\u003eBecause bar-end mirror designs differ, the presence of a circular clamp does not make every aftermarket mirror compatible with this kit.\u003c\/p\u003e\n\n\u003ch2\u003ePre-Purchase Checklist\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConfirm your motorcycle is one of the listed J-Series 350 models.\u003c\/li\u003e\n\u003cli\u003eConfirm the intended mirror instructions specify mount kit KXA00125.\u003c\/li\u003e\n\u003cli\u003eCheck whether you are ordering mirror set 1990401 separately.\u003c\/li\u003e\n\u003cli\u003eInspect both handlebar ends for original finishers, internal weights and previous modifications.\u003c\/li\u003e\n\u003cli\u003eConfirm that the handlebar, grips and throttle tube are standard.\u003c\/li\u003e\n\u003cli\u003eCheck which supplied M6 × 40 mm fastener the official instructions specify.\u003c\/li\u003e\n\u003cli\u003eDo not order solely because an aftermarket mirror advertisement mentions Royal Enfield.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse the fitting instructions supplied for both the motorcycle and the selected mirror set.\u003c\/li\u003e\n\u003cli\u003eProtect the fuel tank, switchgear and painted parts before working on the handlebar.\u003c\/li\u003e\n\u003cli\u003eRemove the original bar-end finishers without damaging the internal thread.\u003c\/li\u003e\n\u003cli\u003eEnsure the adapter flange faces the direction shown in the mirror fitting instructions.\u003c\/li\u003e\n\u003cli\u003eUse the correct supplied fastener for the exact application.\u003c\/li\u003e\n\u003cli\u003eApply only the specified tightening torque and thread treatment.\u003c\/li\u003e\n\u003cli\u003eCheck that the throttle grip returns freely and does not bind against the mirror or adapter.\u003c\/li\u003e\n\u003cli\u003ePosition both mirrors for a clear rearward view before final tightening.\u003c\/li\u003e\n\u003cli\u003eRecheck mirror security and throttle operation before every ride.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended if the handlebar ends have been modified or damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eImportant Return-Prevention Note\u003c\/h2\u003e\n\u003cp\u003eVerify the motorcycle, handlebar, intended mirrors and complete part number before opening the package. A correctly supplied mounting kit is not returnable or refundable after opening, installation, tool marks, threadlocker application, scratched finish, thread damage, modification or use.\u003c\/p\u003e\n\n\u003cp\u003eRecord one continuous unboxing video from the sealed outer parcel through inspection of the package label and every component. Report any wrong, missing or transit-damaged item within 24 hours of delivery with the video, labels, photographs and original packaging.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003e1. What is KXA00125?\u003c\/h3\u003e\u003cp\u003eIt is the genuine Royal Enfield mounting-adapter kit used to install compatible bar-end mirrors on specified J-Series 350 motorcycles.\u003c\/p\u003e\n\u003ch3\u003e2. Are the mirrors included?\u003c\/h3\u003e\u003cp\u003eNo. This listing contains the mounts and supplied fasteners only.\u003c\/p\u003e\n\u003ch3\u003e3. Which genuine mirrors are these designed for?\u003c\/h3\u003e\u003cp\u003eRoyal Enfield identifies bar-end mirror set 1990401 as a compatible separately purchased mirror set.\u003c\/p\u003e\n\u003ch3\u003e4. Is this kit sold as a pair?\u003c\/h3\u003e\u003cp\u003eYes. The fitting information shows two mounting adapters, one for each handlebar end.\u003c\/p\u003e\n\u003ch3\u003e5. Does it fit Meteor 350?\u003c\/h3\u003e\u003cp\u003eYes, for the standard J-Series Meteor 350 when fitting a compatible genuine bar-end mirror kit.\u003c\/p\u003e\n\u003ch3\u003e6. Does it fit Classic 350 Reborn?\u003c\/h3\u003e\u003cp\u003eYes, subject to the standard handlebar-end arrangement and compatible mirror selection.\u003c\/p\u003e\n\u003ch3\u003e7. Does it fit Hunter 350?\u003c\/h3\u003e\u003cp\u003eYes. KXA00125 appears in the genuine Hunter 350 accessory system.\u003c\/p\u003e\n\u003ch3\u003e8. Does it fit the new Bullet 350?\u003c\/h3\u003e\u003cp\u003eYes, for the 2023-on J-Series Bullet 350 with the standard handlebar-end arrangement.\u003c\/p\u003e\n\u003ch3\u003e9. Does it fit an older UCE Classic or Bullet?\u003c\/h3\u003e\u003cp\u003eNo compatibility is claimed for older UCE motorcycles.\u003c\/p\u003e\n\u003ch3\u003e10. Is it required for Continental GT 650?\u003c\/h3\u003e\u003cp\u003eIt is not normally required for the standard 1990401 mirror installation on the Continental GT 650. Follow the mirror instructions for that motorcycle.\u003c\/p\u003e\n\u003ch3\u003e11. Does it fit Interceptor 650?\u003c\/h3\u003e\u003cp\u003eDo not order it automatically for the Interceptor 650; verify the exact mirror and handlebar-end instructions first.\u003c\/p\u003e\n\u003ch3\u003e12. Does it fit Super Meteor or Shotgun 650?\u003c\/h3\u003e\u003cp\u003eNo. Those models can require a different adapter or fitting arrangement.\u003c\/p\u003e\n\u003ch3\u003e13. Will it fit universal aftermarket mirrors?\u003c\/h3\u003e\u003cp\u003eCompatibility is not guaranteed. Clamp diameter, adapter profile and fixing arrangement must all match.\u003c\/p\u003e\n\u003ch3\u003e14. What material are the mounts?\u003c\/h3\u003e\u003cp\u003eRoyal Enfield specifies stainless steel.\u003c\/p\u003e\n\u003ch3\u003e15. What fasteners are included?\u003c\/h3\u003e\u003cp\u003eThe published kit contents show two countersunk M6 × 40 mm and two cap-head M6 × 40 mm fixings.\u003c\/p\u003e\n\u003ch3\u003e16. Why are two different bolt styles supplied?\u003c\/h3\u003e\u003cp\u003eThe correct fixing depends on the motorcycle and mirror configuration. Use only the fixing specified in the instructions.\u003c\/p\u003e\n\u003ch3\u003e17. Are blanking plugs for the original mirror holes included?\u003c\/h3\u003e\u003cp\u003eNo inclusion is promised; obtain suitable plugs separately if required.\u003c\/p\u003e\n\u003ch3\u003e18. How long does installation take?\u003c\/h3\u003e\u003cp\u003eRoyal Enfield publishes an approximate fitting time of 15 minutes for a standard, unmodified motorcycle.\u003c\/p\u003e\n\u003ch3\u003e19. Can I return the kit after test fitting?\u003c\/h3\u003e\u003cp\u003eNo. A correctly supplied kit is not returnable after opening, installation marks, threadlocker or modification.\u003c\/p\u003e\n\u003ch3\u003e20. What proof is needed for a damage claim?\u003c\/h3\u003e\u003cp\u003eKeep a continuous unboxing video, package labels, photographs and original packaging, and report the issue within 24 hours.\u003c\/p\u003e","brand":"Royal Enfield","offers":[{"title":"Default Title","offer_id":51733037515047,"sku":"KXA00125","price":0.0,"currency_code":"INR","in_stock":false}],"url":"https:\/\/underthehood.co.in\/products\/royal-enfield-j-series-350-bar-end-mirror-mounts-kxa00125","provider":"UNDER THE HOOD","version":"1.0","type":"link"}