{"product_id":"tvs-genuine-chain-sprocket-kit-ronin-225-nf321270","title":"TVS Genuine Chain \u0026 Sprocket Kit for Ronin 225 – NF321270 | OEM Final Drive Set","description":"\u003ch2\u003eTVS Genuine NF321270 Chain \u0026amp; Sprocket Kit – Ronin 225\u003c\/h2\u003e\n\u003cp\u003eRenew the worn final-drive components on your \u003cstrong\u003eTVS Ronin 225\u003c\/strong\u003e with the \u003cstrong\u003eTVS Genuine Chain \u0026amp; Sprocket Kit, part number NF321270\u003c\/strong\u003e. This is the motorcycle's rear-wheel drive-chain and sprocket service kit—not a cam\/timing-chain kit, not a chain-only pack and not an aftermarket Rolon-branded kit.\u003c\/p\u003e\n\u003cp\u003eReplacing the drive chain and both sprockets as a matched service set helps avoid putting a new chain on worn sprocket teeth. The correct replacement maintains the intended chain drive arrangement; it is not a horsepower upgrade or a cure for every drivetrain noise.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEFORE ORDERING:\u003c\/strong\u003e Match \u003cstrong\u003eNF321270\u003c\/strong\u003e against your TVS parts catalogue or existing kit, particularly if your Ronin has revised gearing, a modified sprocket, or a different chain length. \u003cstrong\u003eChain-link count is disputed in available TVS catalogue material\u003c\/strong\u003e; see the technical check below.\u003c\/p\u003e\n\u003ch2\u003eProduct identification\u003c\/h2\u003e\n\u003cdiv class=\"table-responsive\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eProduct information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTVS Motor Company – TVS Genuine Spare Part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number \/ SKU\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNF321270\u003c\/strong\u003e (also searched as NF 321270)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS catalogue name\u003c\/td\u003e\n\u003ctd\u003eCHAIN AND SPROCKET KIT \/ KIT CHAIN \u0026amp; SPROCKET\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain application\u003c\/td\u003e\n\u003ctd\u003eTVS Ronin 225 (225.9 cc) in parts-catalogue-covered configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eFinal drive \/ rear-wheel drive chain and sprockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit quantity\u003c\/td\u003e\n\u003ctd\u003eOne matched kit for one motorcycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpected factory gearing reference\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e13T front \/ 42T rear\u003c\/strong\u003e in documented standard Ronin fitments. Confirm the received kit and vehicle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChain link count\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eCheck the packet before listing an exact link count\u003c\/strong\u003e – see catalogue discrepancy below.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetail branding\u003c\/td\u003e\n\u003ctd\u003eTVS Genuine, not Rolon-branded aftermarket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer packet \/ MRP\u003c\/td\u003e\n\u003ctd\u003eVerify label and current MRP on the actual physical stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice \/ inventory \/ weight\u003c\/td\u003e\n\u003ctd\u003eNot stated until verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eWhat is included\u003c\/h2\u003e\n\u003cp\u003eThe TVS kit listing and the Ronin kit-contents table identify these three drive components:\u003c\/p\u003e\n\u003cdiv class=\"table-responsive\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eWhat it does\u003c\/th\u003e\n\u003cth\u003eIncluded quantity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive chain\u003c\/td\u003e\n\u003ctd\u003eConnects engine drive sprocket to rear wheel sprocket\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront \/ engine sprocket\u003c\/td\u003e\n\u003ctd\u003eTransfers gearbox output to drive chain\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel sprocket\u003c\/td\u003e\n\u003ctd\u003eTransmits chain drive to rear wheel\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNot confirmed as part of the retail kit:\u003c\/strong\u003e front-sprocket lock plate or retaining screws, rear sprocket nuts\/bolts, axle, rear-wheel bearings, chain slider\/guide, chain lubricant or cleaner, tools, and other workshop hardware. These are separately catalogued items; do not assume they are supplied without checking the sealed kit contents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit quantity:\u003c\/strong\u003e one saleable NF321270 kit contains a service set for one motorcycle, not several kits. The drive chain and both sprockets should be checked against the physical package before dispatch.\u003c\/p\u003e\n\u003ch2\u003eConfirmed motorcycle fitment and limitations\u003c\/h2\u003e\n\u003cdiv class=\"table-responsive\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTVS motorcycle\u003c\/th\u003e\n\u003cth\u003eFitment assessment \/ check\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Ronin 225 – manufacturer parts-catalogue-covered single-channel ABS\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eYes, for the matching NF321270 drive configuration\u003c\/strong\u003e. Match OE part number and final-drive hardware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Ronin 225 – manufacturer parts-catalogue-covered dual-channel ABS\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eYes, for the matching NF321270 drive configuration\u003c\/strong\u003e. ABS channel count alone does not establish every later revision.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Ronin 225 ABS MID \/ Base\u003c\/td\u003e\n\u003ctd\u003eExact NF321270 reference is documented in model-specific parts catalogues.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Ronin SS-TD \/ Nimbus – documented Indonesian configurations\u003c\/td\u003e\n\u003ctd\u003eOfficial TVS overseas parts store lists the same OEM part number; confirm local motorcycle variant.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Ronin – newer \/ modified \/ imported specification\u003c\/td\u003e\n\u003ctd\u003eCheck the VIN, updated parts catalogue, fitted sprocket sizes, chain length and rear hub pattern first.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Apache RTR 160 4V \/ RTR 200 4V\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNot established.\u003c\/strong\u003e These bikes use separately numbered chain\/sprocket kits; not a substitute by appearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Raider, NTORQ, Jupiter, other TVS models\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNot established.\u003c\/strong\u003e Do not select NF321270 by brand alone.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eA matching model name does not resolve a changed engine sprocket, altered final-drive ratio, custom chain or replacement rear wheel. For a modified motorcycle, compare the removed sprockets and chain and ask your mechanic to verify before ordering.\u003c\/p\u003e\n\u003ch2\u003eChain length and gearing: important verification\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRear sprocket:\u003c\/strong\u003e Ronin parts references identify the original rear sprocket as \u003cstrong\u003e42 teeth\u003c\/strong\u003e (separate rear sprocket reference NF111220). The documented standard Ronin reduction and reputable dedicated Ronin kit references support \u003cstrong\u003e13T front \/ 42T rear\u003c\/strong\u003e. Confirm your bike has its standard gearing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy there are two link counts in circulation:\u003c\/strong\u003e One Ronin \u003cem\u003ekit contents\u003c\/em\u003e table specifies a \u003cstrong\u003e114-link chain\u003c\/strong\u003e for NF321270, while a diagram in the same Ronin parts-catalogue family lists \u003cstrong\u003eNF111520 – CHAIN ASSY 116 SEALING RING\u003c\/strong\u003e as a separate chain part. These are not identical statements. Therefore, the exact chain supplied in a newly packed NF321270 kit should be confirmed from the retail label or direct inspection instead of promising that every NF321270 box has 114 or 116 links.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not assume a 116-link stand-alone chain reference means the complete NF321270 kit contains a 116-link chain.\u003c\/strong\u003e Also do not assume a 114-link aftermarket kit proves the contents of every TVS Genuine kit revision. Chain pitch, sealed-ring construction, sprocket tooth count, chain joining method and rear sprocket mounting must be verified against the physical kit if any of these details is material to your vehicle.\u003c\/p\u003e\n\u003cp\u003eIf the original bike has been converted to a 14-tooth front sprocket or other modified gearing, this is not an advertised performance-conversion kit.\u003c\/p\u003e\n\u003ch2\u003eCompare related TVS chain and sprocket part numbers\u003c\/h2\u003e\n\u003cdiv class=\"table-responsive\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eIntended product \/ distinction\u003c\/th\u003e\n\u003cth\u003eCan it replace NF321270?\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNF321270\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTVS Genuine Ronin 225 chain \u0026amp; sprocket kit\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis product\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNF321280\u003c\/td\u003e\n\u003ctd\u003eTVS Apache RTR 160 4V kit, catalogue description 13T \/ 45T \/ 136 links\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNo automatic interchangeability\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eN9326260\u003c\/td\u003e\n\u003ctd\u003eTVS Apache RTR 160 4V kit, catalogue description 13T \/ 44T \/ 138 links\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNo automatic interchangeability\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNF321540\u003c\/td\u003e\n\u003ctd\u003eAnother separately numbered TVS chain\/sprocket kit\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNo automatic interchangeability\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNF111520\u003c\/td\u003e\n\u003ctd\u003eSeparately listed Ronin chain assembly (catalogue calls it 116 sealing ring)\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNot the same as a three-component service kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eN9081830\u003c\/td\u003e\n\u003ctd\u003eSeparately catalogued rubberised engine sprocket\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent reference, not a kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNF111220\u003c\/td\u003e\n\u003ctd\u003eSeparately catalogued Ronin rear sprocket, 42 teeth\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eComponent reference, not a kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eA model-specific front sprocket may differ in spline dimensions, offset or rubber damping; rear sprockets can differ in mounting pattern and chain compatibility even where tooth counts look similar. Always select by exact OEM reference and assembly configuration.\u003c\/p\u003e\n\u003ch2\u003eTVS Genuine vs Rolon aftermarket – choose the correct product\u003c\/h2\u003e\n\u003cp\u003eThis listing is for \u003cstrong\u003eTVS Genuine NF321270\u003c\/strong\u003e. Under The Hood also offers a separate \u003ca href=\"https:\/\/underthehood.co.in\/products\/rolon-hpor-f418-nf-noise-free-chain-sprocket-kit-tvs-ronin-225-13t-42t-114l\"\u003eRolon HPOR F418 NF Noise-Free Chain \u0026amp; Sprocket Kit for TVS Ronin 225\u003c\/a\u003e. The Rolon kit is a separately branded aftermarket option, with its own advertised specifications, supply and packaging.\u003c\/p\u003e\n\u003cp\u003eThe Rolon option must not be described as the contents or manufacturer of NF321270 without physical evidence. If you are trying to restore the original TVS reference, select NF321270. If you want to compare a Rolon-branded alternative, follow the separate listing and compare the actual kit labels.\u003c\/p\u003e\n\u003ch2\u003eWhen should the chain and sprockets be replaced?\u003c\/h2\u003e\n\u003cp\u003eThe chain and sprockets work together. Inspect the system if there is persistent excessive chain slack, binding or tight spots, a damaged or stiff link, hooked or uneven sprocket teeth, unusual drive vibration, or a chain that cannot be correctly adjusted. A squeak or chain noise alone does not prove that the entire kit must be replaced: check chain lubrication, alignment, chain slider, sprocket bearings, fastener condition and adjustment first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe chain has excessive wear, irregular elongation, tight or seized links, missing\/damaged sealing elements, or visible corrosion.\u003c\/li\u003e\n\u003cli\u003eSprocket teeth have become sharp, hooked, chipped, uneven or asymmetrically worn.\u003c\/li\u003e\n\u003cli\u003eThe same chain repeatedly needs adjustment or has noticeably inconsistent slack around its rotation.\u003c\/li\u003e\n\u003cli\u003eThe bike has a damaged or incorrect front sprocket or rear sprocket from a previous nonstandard conversion.\u003c\/li\u003e\n\u003cli\u003eA qualified mechanic confirms that chain and sprockets are sufficiently worn to replace together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTVS recommends inspecting all three drivetrain components and replacing the engine sprocket, rear sprocket and chain together where worn. Proper adjustment, lubrication and rear-wheel alignment are essential even with a brand-new kit.\u003c\/p\u003e\n\u003ch2\u003eInstallation and safety checklist\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eBefore dismantling, verify NF321270, the original front and rear sprocket specifications and the chain configuration for your vehicle.\u003c\/li\u003e\n\u003cli\u003eSupport the motorcycle securely with the engine switched off and transmission in neutral. Never run the engine to rotate the chain during service.\u003c\/li\u003e\n\u003cli\u003eInspect the old drive arrangement, including sprocket offset, front spline profile, rear sprocket mounting, chain guide and chain guard. Document any modifications.\u003c\/li\u003e\n\u003cli\u003eInspect sprocket fasteners, front lock plate, rear cush-drive condition, rear wheel bearings, chain adjusters and chain slider. Replace damaged or single-use retainers as specified in the workshop manual; do not assume they are in this kit.\u003c\/li\u003e\n\u003cli\u003eFit all drive components in their correct orientation and use the relevant TVS service manual for tightening sequence, locking hardware, torque values and the chain joining method.\u003c\/li\u003e\n\u003cli\u003eAdjust chain slack and check rear-wheel alignment in the exact checking condition specified by the owner's manual, then recheck at multiple wheel positions.\u003c\/li\u003e\n\u003cli\u003eTurn the wheel by hand to check smooth movement and correct clearance from the tyre, swingarm, chain guard and other components.\u003c\/li\u003e\n\u003cli\u003eLubricate correctly, inspect for loose fasteners or chain contact, and conduct a controlled road test. Recheck chain adjustment after initial running as required by the workshop manual.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer service reference:\u003c\/strong\u003e In the checked TVS Ronin owner's manual the chain slack is stated as \u003cstrong\u003e20–25 mm\u003c\/strong\u003e, with the motorcycle on the centre stand in neutral for inspection. This is a service reference for the manual-covered bike, not a licence to ignore a later manual or modified suspension. TVS also recommends chain cleaning and lubrication as frequently as every \u003cstrong\u003e500 km\u003c\/strong\u003e. Follow your motorcycle's applicable manual and never overtighten the chain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional fitting recommended.\u003c\/strong\u003e A chain fitted too tightly or too loosely, an insecure master link, a misaligned rear wheel or incorrectly retained sprockets can damage the motorcycle and create a serious riding hazard.\u003c\/p\u003e\n\u003ch2\u003eBefore buying – the right way to verify\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCheck that your motorcycle's OEM parts catalogue or existing packet specifies \u003cstrong\u003eNF321270\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eConfirm the motorcycle is a \u003cstrong\u003eTVS Ronin 225\u003c\/strong\u003e and note its model year, market specification, VIN and any sprocket modifications.\u003c\/li\u003e\n\u003cli\u003eIf chain length is decisive, ask for a photo of the exact stocked kit label because both 114 and 116 appear in catalogue material.\u003c\/li\u003e\n\u003cli\u003eCompare rear sprocket mounting-hole pattern, front sprocket spline\/profile, tooth counts, chain pitch and any included joining hardware.\u003c\/li\u003e\n\u003cli\u003eThis is a \u003cstrong\u003ecomplete final-drive kit\u003c\/strong\u003e, not an engine timing-chain set, and not a bare chain or only one sprocket.\u003c\/li\u003e\n\u003cli\u003eConfirm current genuine TVS packaging, packed components, MRP and manufacturing details before dispatch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003e1. What is TVS NF321270?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt is the TVS Genuine chain and sprocket kit for the Ronin 225 final-drive system, including a drive chain and front\/rear sprockets.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e2. Is NF321270 for the TVS Ronin 225?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The exact part number appears in Ronin 225 parts catalogues and TVS's official overseas parts store. Check your model revision and existing gearing.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e3. Is it compatible with single-channel ABS Ronin?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt is documented for Ronin configurations including single-channel ABS where NF321270 is the specified drive kit. Confirm your VIN\/parts catalogue.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e4. Does it fit the dual-channel ABS Ronin?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe part is documented in Ronin ABS variants, but confirm the exact parts catalogue for the production version; ABS channel count does not guarantee unchanged final-drive hardware.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e5. Will it fit a 2025 or 2026 Ronin?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eDo not assume by year alone. Verify NF321270 against the latest TVS catalogue or the existing installed kit, especially for revisions or modified bikes.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e6. Does the kit include both sprockets?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe manufacturer's kit list identifies an engine\/front sprocket, a rear sprocket and a drive chain. Extra retention hardware is not confirmed.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e7. Is there a rear sprocket in the kit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes, the manufacturer's kit-contents description includes a rear sprocket, listed as 42 teeth in the checked Ronin kit list.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e8. How many teeth does the front sprocket have?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eDocumented standard Ronin gearing uses 13 teeth at the front. Confirm tooth count on the actual kit and vehicle before ordering.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e9. How many teeth are on the rear sprocket?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe manufacturer's Ronin kit list identifies a 42-tooth rear sprocket for this documented configuration.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e10. Is the chain 114 links or 116 links?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe available TVS parts references are inconsistent: the NF321270 kit list says 114, while a separately catalogued Ronin chain, NF111520, is labelled 116. Verify the actual NF321270 pack before relying on either count.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e11. Is this an O-ring or X-ring chain?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eA separate Ronin chain reference includes the words “sealing ring”, but that does not prove the exact ring type or supplied chain specification in every NF321270 kit revision. Check the retail packet.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e12. What chain pitch does this kit use?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe checked exact-SKU sources do not establish a reliable pitch specification for every production revision. Confirm the packet or TVS workshop reference before specifying a 428\/520\/etc. size.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e13. Is this the same as a Rolon F418 NF kit?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. NF321270 is a TVS Genuine kit SKU. Rolon HPOR F418 NF is a separately branded Ronin chain kit, offered as a different product.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e14. Does NF321270 fit Apache RTR 160 4V?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo interchangeable application was verified. Apache 160 4V has other kit numbers, including NF321280 and N9326260, with different listed gearing.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e15. Is NF321280 the same as NF321270?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. NF321280 is catalogued as an Apache RTR 160 4V kit, not the Ronin 225 NF321270 kit.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e16. What is N9326260?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt is a different TVS kit reference used on specified Apache RTR 160 4V configurations; do not substitute it for the Ronin kit.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e17. Can I replace just the chain and keep the old sprockets?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eA chain fitted to worn sprocket teeth may wear prematurely. TVS recommends inspecting the chain and both sprockets and replacing worn drive components together.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e18. Will this kit reduce chain noise?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt can address noise caused by worn final-drive parts, but not noise from poor adjustment, a worn chain guide, an engine or wheel bearing issue, or another source. Diagnose first.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e19. Will it increase top speed or horsepower?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eIt is an original-type replacement kit, not a performance tuning or gearing-conversion product.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e20. Can I use it after changing to a 14-tooth front sprocket?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eDo not assume so. A modified final-drive ratio can require a different combination of chain length, sprocket dimensions and alignment. Verify with your mechanic.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e21. How many kits do I get?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eOne TVS NF321270 chain-and-sprocket kit for one motorcycle.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e22. Are the rear sprocket bolts included?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNot confirmed. TVS lists many retaining fasteners separately; assume only the chain and two sprockets until the packet is checked.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e23. Is the front sprocket lock plate included?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNot confirmed. A lock plate is separately catalogued. Ask for a contents check if you need new retention hardware.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e24. Is chain lube included?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eChain cleaner and lubricant are not confirmed as part of the NF321270 kit and should be purchased separately.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e25. What chain slack should my Ronin have?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe checked TVS Ronin owner's manual gives 20–25 mm in its checking method. Follow the applicable manual for your exact version.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e26. How often should I lubricate the chain?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eTVS's Ronin owner's manual recommends cleaning and lubrication as frequently as every 500 km, particularly important in dusty or wet conditions.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e27. Does a worn chain always mean the whole kit is bad?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNot automatically, but chain and sprockets wear as a system. A competent mechanic should examine all three components, alignment and chain guide.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e28. Can I install it myself?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eOnly if you have appropriate equipment and the correct TVS workshop procedure. Drive-chain retention, torque and alignment are safety critical.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e29. Is this a genuine TVS product or a third-party copy?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis listing is for TVS Genuine NF321270. Confirm TVS-branded genuine packaging and the exact part number before fitting.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e30. How do I confirm it fits before ordering?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eShare the motorcycle year, model\/ABS variant, VIN or current kit label, plus photos of existing sprockets if modified. Select the exact part number.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003e31. Does this replace the engine timing chain?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eNo. It is the external final-drive chain and sprockets used to drive the rear wheel; the engine cam\/timing chain is a different system.\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003cp\u003e\u003cstrong\u003eFind the right service item:\u003c\/strong\u003e TVS Ronin 225 OEM drive-chain kit, Ronin 225 original chain sprocket set, NF321270, NF 321270, Ronin front 13T rear 42T sprockets, genuine TVS chain kit, chain and sprocket replacement kit for Ronin single-channel \/ dual-channel ABS.\u003c\/p\u003e\n","brand":"TVS Motor Company","offers":[{"title":"Default Title","offer_id":52654373077287,"sku":"NF321270","price":2768.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0878\/7447\/0183\/files\/library-510A8548-9547-419E-96F2-46F47F9E4E70-L0-001.jpg?v=1795095656","url":"https:\/\/underthehood.co.in\/products\/tvs-genuine-chain-sprocket-kit-ronin-225-nf321270","provider":"UNDER THE HOOD","version":"1.0","type":"link"}