Aftermarket Universal Worm Drive Hose Clamp / Taiwan Clamp – Set of 2

Use this aftermarket universal worm-drive hose clamp set for common motorcycle and workshop clamping jobs where an adjustable metal band clamp is required. These clamps are also commonly searched locally as Taiwan clamp, China clamp, hose clamp, pipe clamp, jubilee-type clip, carburettor hose clamp, and exhaust wrap clamp.

This listing is for a set of 2 clamps. The clamps are universal-fit, so fitment depends on the actual outside diameter of the hose, rubber pipe, bend pipe, intake pipe, or wrapped pipe where they will be installed.

What This Product Is

• Aftermarket adjustable worm-drive metal clamp set
• Commonly called Taiwan clamp, China clamp, hose clamp, pipe clamp, worm clamp, worm gear clamp, or jubilee-type hose clip
• Used for tightening and securing hoses, rubber pipes, intake pipes, exhaust wrap ends, and general workshop pipe-fitting jobs
• Sold as 2 pieces per set
• Universal fitment by diameter matching

What This Product Is Not

• Not a bike-specific OEM part
• Not Royal Enfield, Bajaj, TVS, Hero, Yamaha, KTM, Honda, Suzuki or Jawa genuine
• Not an exhaust leak-sealing clamp
• Not a high-pressure fuel-injection clamp unless specifically rated and matched
• Not a brake hose / hydraulic hose clamp
• Not a plastic zip tie or cable tie
• Not the hose, pipe, exhaust wrap, carburettor rubber, or bend pipe itself

Key Features

• Set of 2 adjustable metal clamps
• Worm-drive screw tightening mechanism
• Silver metal finish
• Reusable and adjustable for service work
• Useful for motorcycles, scooters, workshop repair, custom fitting and universal pipe/hose holding jobs
• Easy to tighten with a screwdriver or suitable socket depending on screw head access
• Clean, practical replacement for loose, rusty, broken or missing old clamps

Buyer Search Names / Internal Search Keywords

Taiwan clamp, China clamp, hose clamp, pipe clamp, worm drive clamp, worm gear clamp, worm clamp, jubilee clip type clamp, metal hose clip, adjustable hose clip, motorcycle hose clamp, carburettor pipe clamp, carburetor hose clamp, air filter hose clamp, intake hose clamp, radiator hose clamp, coolant hose clamp, breather pipe clamp, fuel pipe clamp, exhaust wrap clamp, bend pipe wrap clamp, silencer wrap clamp, header wrap clamp, universal clamp set of 2.

Main Use Cases

Universal Fitment / Check Before Ordering

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

• High-pressure EFI fuel supply lines unless proper fuel-injection rated clamp is specifically required and confirmed
• Brake lines, hydraulic clutch lines, high-pressure oil lines or safety-critical pressure lines
• Customers needing the rubber hose, pipe, carburettor manifold, exhaust wrap roll or bend pipe itself
• Customers needing a model-specific OEM clamp with exact factory finish/shape
• Applications where the clamp is too small or too large for the measured outside diameter
• Areas where the clamp screw will hit moving parts, hot-sensitive parts, wiring, fuel line, brake hose or the rider

Technical Details

Similar Parts Comparison

When Should This Be Replaced?

• Old clamp is rusty, broken, stripped or missing
• Hose or rubber pipe is loose on the fitting
• Carburettor rubber / air hose is not holding properly
• Exhaust wrap end is opening up
• A temporary or universal workshop clamp is needed for a suitable pipe/hose diameter
• Old clamp screw no longer tightens properly

Recommended Related Products to Check

• Carburettor rubber / intake manifold rubber
• Air filter hose / intake pipe
• Breather pipe / overflow pipe
• Exhaust heat wrap / bend pipe wrap
• Fuel pipe or coolant hose, only where the correct hose and clamp rating is confirmed

What’s in the Box

2 × Aftermarket universal worm-drive metal clamps

Installation Notes

1. Measure the outside diameter of the hose, pipe, or wrapped pipe.
2. Place the clamp around the hose/pipe and position the screw where it is accessible.
3. Check that the screw housing does not touch wiring, fuel line, brake hose, frame, rider’s foot, chain, tyre or moving parts.
4. Tighten gradually until the hose/wrap is secure.
5. Do not over-tighten, especially on soft rubber hoses or plastic fittings.
6. After first use or heat cycle, recheck the clamp tightness.

Return-Prevention Note

This is a universal set of 2 clamps. It is not bike-specific and not size-guaranteed for every hose or pipe. Measure the outside diameter first and confirm whether your use is low-pressure, high-heat, fuel-related, or safety-critical before ordering.

FAQs

What are these clamps called?

They are commonly called worm-drive hose clamps, worm gear clamps, hose clips, pipe clamps, Taiwan clamps, China clamps, or jubilee-type clips.

How many pieces will I receive?

You will receive 2 clamps.

Can I use this on carburettor hose?

Yes, it can be used on carburettor rubber or intake hose where the clamp diameter matches and the application is suitable. Do not over-tighten.

Can I use this for exhaust wrap?

Yes, it can be used to secure exhaust wrap / bend-pipe wrap ends where the clamp size fits the wrapped pipe. It is not an exhaust leak-sealing clamp.

Can I use it on fuel pipe?

Use only where the mechanic confirms the hose, pressure and clamp type are suitable. Do not use ordinary worm-drive clamps on high-pressure EFI fuel lines unless the clamp is specifically rated for that system.

Is this bike-specific?

No. This is a universal aftermarket clamp set. Fitment is by measured diameter, not by motorcycle model.

Can I use it on Royal Enfield, Bajaj, TVS, Hero, Yamaha or KTM?

Yes, only if the hose/pipe/wrap diameter and application are suitable. It is not brand-specific.

Is this reusable?

Yes, worm-drive clamps can generally be loosened and tightened again if the screw and band are not damaged.

SEO Tags

Aftermarket, Taiwan Clamp, China Clamp, Hose Clamp, Pipe Clamp, Worm Drive Clamp, Worm Gear Clamp, Worm Clamp, Metal Hose Clip, Adjustable Hose Clip, Motorcycle Hose Clamp, Carburetor Hose Clamp, Carburettor Pipe Clamp, Air Intake Hose Clamp, Air Filter Hose Clamp, Breather Pipe Clamp, Fuel Pipe Clamp, Coolant Hose Clamp, Exhaust Wrap Clamp, Bend Pipe Clamp, Header Wrap Clamp, Universal Clamp Set, Set of 2 Clamps

Image Filename Suggestions

• aftermarket-universal-worm-drive-hose-clamp-set-of-2.jpg
• taiwan-china-clamp-motorcycle-hose-pipe-clamp-set-2.jpg
• universal-motorcycle-carburetor-exhaust-wrap-clamps.jpg

Image Alt Text Suggestions

• Aftermarket universal worm drive hose clamp Taiwan clamp set of 2
• Set of 2 metal hose pipe clamps for motorcycle carburettor hose and exhaust wrap
• Universal China clamp worm gear clamp for motorcycle hose pipe and bend pipe wrap