Bajaj Genuine Clutch Cable JC191004 for Pulsar 125, 150, 180 & 220F

Bajaj Genuine Clutch Cable JC191004 – Pulsar 125 / 150 / 180 / 220F

Restore reliable manual clutch control with the Bajaj Genuine Clutch Cable, part number JC191004. This clutch wire links the handlebar clutch lever to the clutch-actuation mechanism, transmitting the rider’s lever movement to disengage the clutch. It is intended for specific original-generation Bajaj Pulsar 125, 150, 180 and 220 applications, as outlined below—not every motorcycle carrying the Pulsar badge.

Before ordering: check your existing cable’s number or the exact model/production-variant parts catalogue. Different Pulsar models and certain versions within the same model use different cables. A clutch cable is not the clutch plate set or the complete clutch mechanism.

Quick Product Check

Motorcycle Compatibility – Check the Exact Variant

Fitment status: entries above refer to documented model-year/variant applications, not a blanket promise of compatibility for every production year. Compare the printed number on the original cable, its end fittings, cable routing and the motorcycle’s VIN-based parts catalogue when in doubt.

Important Exclusions and Part-Number Differences

• Pulsar NS200: do not order JC191004 merely because the motorcycle is a Pulsar 200; NS200 cable references include JL161200.
• Pulsar RS200: do not treat JC191004 as interchangeable; a separate RS200 clutch-cable family is referenced, including DT161203.
• Older Pulsar 150 / 180 variants: other clutch cable numbers exist, including DJ191015 for some earlier variants. Confirm before purchase.
• Selected Pulsar 220 configurations: parts references can also show DK191011. Do not assume that both cables have identical dimensions, routing or application.
• NS160, N160, N250, NS125, Dominar and Avenger: not verified for JC191004; excluded from confirmed fitment.
• Modified handlebars or clutch controls: a stock-length cable may not suit changed routing or geometry; measure and match the complete operating arrangement.

What This Cable Does

Pulling the clutch lever tensions the cable and moves the clutch-release mechanism. Correct cable operation helps the rider disengage the clutch for starting, shifting and stopping. A broken, binding, corroded or incorrectly adjusted cable can make gear changes difficult or prevent dependable disengagement. This replacement addresses the cable itself; it cannot correct worn clutch plates, warped components, incorrect oil, damaged actuator parts or other clutch-system defects.

When to Inspect or Replace a Clutch Cable

• Clutch lever movement feels unusually rough, sticky or inconsistent.
• Visible wire strands fray near the handlebar or engine end.
• The cable has rust, kinks, crushed outer casing or damaged adjusters.
• The clutch does not disengage consistently after proper adjustment and related components are checked.
• The existing clutch wire has snapped or its end fitting is damaged.

Diagnostic note: hard shifting, clutch drag or clutch slip does not prove the cable has failed. First inspect lever pivot, free play, routing, cable condition and clutch actuation before deciding which component needs replacement.

Why Choose the Bajaj Genuine Part?

This is a Bajaj Genuine Parts branded item, identified by part number JC191004 on the genuine Bajaj packet. Buying by the exact catalogue part number is preferable to relying on generic “Pulsar universal” cable listings. Genuine branding alone does not override differences between vehicle variants; always verify the application.

What You Receive

• 1 × Bajaj Genuine Clutch Cable – JC191004

Not included: clutch lever, clutch plates, clutch basket, release mechanism, engine-side mounting hardware and any UTH-branded keychain/strap shown beside the packet in stock photographs. The keychain is a photographic prop and is not part of the sale.

Installation and Adjustment Guidance

1. Compare the new cable's part number, total routing, end fittings and adjuster arrangement with the original before fitting.
2. Route the cable along the motorcycle’s intended path without sharp bends, exhaust contact, pinching or steering interference.
3. Ensure both ends are correctly seated at the handlebar lever and clutch actuator.
4. Adjust the clutch lever free play according to the specific motorcycle’s owner/service manual, not a generic value for all Pulsars.
5. Turn the handlebars fully left and right and check that lever action and cable tension remain normal.
6. Before riding, check full disengagement, lever return, positive gear engagement and safe control operation.

If unsure, have the cable installed and adjusted by a qualified motorcycle mechanic. Incorrect routing or adjustment can cause poor disengagement, excessive wear or unpredictable control.

Before You Order – Five-Point Checklist

1. Check that your intended part number is exactly JC191004.
2. Identify the motorcycle as Pulsar 125, 150, 180, original 200 or 220 and confirm its actual generation and model year.
3. On Pulsar 150, confirm relevant BS4/BS6 and ABS/Twin Disc configuration before selecting.
4. For older Pulsar 180/220 versions, check whether the VIN-specific parts listing instead calls for a different cable.
5. Inspect the old cable fittings and handlebar routing, particularly if accessories or non-stock handlebars have been fitted.

Frequently Asked Questions

1. Is JC191004 a Bajaj Genuine part?

Yes. JC191004 is the part number on the Bajaj Genuine Parts clutch-cable packaging used for this listing.

2. Does JC191004 fit the Bajaj Pulsar 125 BS6?

It is listed for selected Pulsar 125 BS6 Single Seat and Split Seat applications in 2020–21 parts references. Verify the exact year and vehicle revision for other variants.

3. Will this clutch cable fit every Pulsar 150?

No. Selected Pulsar 150 ABS, Twin Disc and BS6 configurations reference JC191004, but some older or non-ABS configurations use different cables.

4. Is it compatible with the Pulsar 180 BS4?

JC191004 is catalogued for selected Pulsar 180 BS4/UG models. Match the original cable or model-specific parts diagram.

5. Is this the clutch cable for Pulsar 220F?

Yes for selected Pulsar 220F/DTS-i configurations in the catalogue references. Some other 220 configurations reference DK191011; check the original part number.

6. Will it fit Pulsar NS200?

Do not use JC191004 for NS200 without authoritative vehicle-specific confirmation. NS200 uses a different clutch-cable family, with references including JL161200.

7. Does this fit the Pulsar RS200?

RS200 is not included in confirmed fitment. RS200 cable references differ from JC191004.

8. Is this the accelerator cable?

No. JC191004 is the clutch cable. A throttle/accelerator cable performs a different function and has a separate part number.

9. Is the clutch lever included?

No. The pack contains one clutch cable only. The lever and engine-side clutch components are not supplied.

10. Is the UTH keychain shown in the photograph included?

No. The Under The Hood keychain/strap is used only as a photographic prop.

11. Can a bad clutch cable cause hard gear shifting?

It can if it binds, stretches, frays or is incorrectly adjusted, but hard shifting can also result from clutch-internal or gearbox-related problems. Proper inspection is recommended.

12. Will a new clutch cable cure clutch slipping?

Not necessarily. Slipping can be caused by worn clutch plates, incorrect free play or other mechanical factors. Diagnose the problem before replacing parts.

13. Can I install it myself?

Installation is best handled by someone familiar with cable routing and clutch adjustment. The lever must work freely and the clutch must disengage correctly before riding.

14. Is the cable length universal for all Pulsars?

No. Similar-looking cables can differ in length, end fittings, bracket locations and routing. Buy by the verified model/part number.

15. Does the ₹229 MRP apply to this specific packet?

Yes. The Bajaj Genuine Parts packet used for this product identification is marked MRP ₹229 inclusive of taxes. Other production batches may carry different printed prices.

Clutch Cable, Clutch Wire and Pulsar Clutch Control Cable

Customers also search for this component as Bajaj Pulsar clutch wire, clutch control cable, Pulsar 150 clutch cable, Pulsar 180 clutch wire, Pulsar 220F clutch cable and JC191004 genuine cable. These names refer to the mechanical clutch cable, not the internal clutch assembly. Always use the verified part number to choose the correct replacement.

Under The Hood ordering support: If your production year or cable number does not match the compatibility guidance, verify your motorcycle details before placing the order.