Chrome Handlebar End Weights for Royal Enfield Classic 350/500, Bullet 350, Electra – Aftermarket Bar Ends (Pair)

Give your Royal Enfield the solid, planted feel it deserves with these Chrome Handlebar End Weights for UCE models. Designed for standard 22 mm handlebars used on Royal Enfield Classic 350/500, Bullet 350 and Electra, these bar ends help damp uncomfortable handle vibrations and add a premium chrome finish at the same time. Bar-end weights are widely used on motorcycles to reduce vibration at the grips by shifting the bar’s resonant frequency away from engine frequencies, improving comfort on long rides. 

Each weight uses an internal expanding bush with an Allen-bolt, allowing quick bolt-on fitment into hollow bar ends – no welding or cutting required. Once tightened, they lock firmly inside the handlebar to stay secure even on rough roads.

Whether you ride daily in the city or cruise all day on the highway, these chrome bar ends not only enhance stability but also protect your grips and levers in case of a minor fall. The clean, minimal design matches stock Royal Enfield aesthetics and looks at home on both classic and modified builds.

Ideal for riders who want better comfort, more control and a neater finish without spending superbike money on OEM accessories.

Key Features 

1. Dedicated for Royal Enfield UCE models – suitable for Classic 350/500, Bullet 350 and Electra with standard 22 mm hollow handlebars. 

2. Solid metal construction – heavy bar-end weights help reduce handlebar buzz and rider fatigue on long rides. 

3. Premium chrome finish – bright, mirror-like look that matches RE factory chrome components and custom builds.

4. Easy bolt-on installation – expanding bush design with Allen bolt fits directly inside the handlebar; no cutting or welding.

5. Improved stability & control – added weight at the bar ends helps the bike feel more planted at cruising speeds.

6. Protective function – helps shield grips and levers from direct impact during small tips or parking-lot falls.

7. Universal 22 mm compatibility – can fit most motorcycles and scooters with 22 mm hollow handlebars (verify bar-end inner diameter before ordering).

8. Cost-effective upgrade – much more affordable than branded bar end finishers while delivering real comfort benefits.

Compatibility Table

Explicit exclusions / caution

• Not designed specifically for J-Series models (new Classic Reborn, Hunter, Meteor, new Bullet 350), 650 Twins, or Himalayan – may require modification or different hardware.

• Does not include OEM Royal Enfield branding; this is an aftermarket accessory.

Variants

• Finish: Chrome (Default)
  
  

What’s in the Box

• 1 x Pair of Chrome Handlebar End Weights (Left + Right)

• Integrated expanding bushes with Allen bolts

Installation & Fitment Notes

• Ensure your motorcycle uses 22 mm hollow handlebars with removable end plugs or open ends.

• Remove any existing bar end weights or plastic plugs.

• Insert the new weight into the handlebar and tighten the Allen bolt until the internal bush expands and locks firmly.

• Do not overtighten – tighten until snug and check that there is no play.

• After installation, rotate the handlebar lock-to-lock to ensure there is no interference with tank, cables or switch housings.

• Recommended to re-check tightness after the first 50–100 km of riding.

Warranty 

• This is an aftermarket accessory with no official Royal Enfield warranty.

FAQs – Chrome Handlebar End Weights for Royal Enfield

Q1. Will these handlebar end weights fit my Royal Enfield Classic 350 / Classic 500 / Bullet 350?
Yes, these chrome handlebar end weights are designed for Royal Enfield UCE models with standard 7/8" (22 mm) handlebars and hollow bar ends – typically Classic 350 UCE, Classic 500, Bullet 350 UCE and Bullet 500 UCE. If your bar ends are welded shut or heavily modified, fitment may require minor adjustment.

Q2. Do these bar ends fit Electra and Thunderbird models as well?
In most cases they will fit Electra 350 UCE and Thunderbird 350/500 UCE as long as the bike still has the stock 7/8" Royal Enfield handlebar with hollow ends. Because some bikes may have aftermarket bars or changed internals, we recommend checking that:

• The handlebar ends are hollow

• The internal fixing can accept the supplied bolt / anchor

If you are unsure, share a photo of your bar end with Under The Hood before ordering.

Q3. Do these handle weights actually reduce vibrations?
Yes, adding weight to the bar ends helps dampen high-frequency vibrations that travel through the handlebar. These chrome bar ends add mass at the outermost point of the bar, which can make the bike feel more stable at cruising speeds and reduce tingling in the hands compared to running without weights or very light plastic caps.

Q4. Are these genuine Royal Enfield parts or aftermarket?
These are aftermarket chrome handlebar end weights, not a genuine Royal Enfield part. They are made as compatible bar ends for UCE models (Classic / Bullet / Electra / Thunderbird) and are chosen for correct size, finish and weight to work well on Royal Enfield handlebars.

Q5. Will I need to modify my handlebar or grips to install them?
On a stock UCE Royal Enfield handlebar, these are generally plug-and-play:

• Remove the existing bar-end weights or plastic caps

• Insert the new bar end assembly

• Tighten the bolt so the internal anchor expands and locks inside the handlebar

If your grips overlap the bar end, you may need to trim a very small amount of rubber so the bar end seats flat against the handle.

Q6. Can I use these bar ends with bar-end mirrors or hand guards?
It depends on the design of your mirrors/guards. In many cases, they can be used together with bar-end mirrors if:

• The mirror clamp can share the same bolt, or

• You use a slightly longer bolt with the same thread.

If you are using big aluminium hand guards with their own bar-end fittings, you will usually not use these bar ends at the same time.

Q7. Will the chrome rust over time? How do I maintain it?
The bar ends are made from metal with a chrome-plated finish. As with any chrome part, exposure to moisture and road salts can cause surface spots over time. To keep them looking new:

• Wipe them regularly with a dry or slightly damp microfiber cloth

• Avoid harsh acid-based cleaners

• Apply a light coat of wax or polish occasionally for extra protection