Genuine Royal Enfield EVAP Hose (T-Connector to Canister) for Continental GT 535 Euro 4 | 1010167/B

Royal Enfield 1010167/B is the genuine OEM EVAP hose used in the Evaporative Emission (EVAP) system on the Continental GT 535 Euro 4. This specific line routes vapour plumbing from the T-connector to the charcoal canister (GT)—critical for correct vapour capture and purge operation on emission-equipped models. 

Replace this hose if you notice cracking, hardening, loose fit, fuel smell, or intermittent vacuum/idle irregularities after servicing the canister area. Small EVAP leaks often don’t look serious, but they can cause drivability issues and repeated hose pop-offs in hot Indian conditions if the rubber has aged.

This is not a universal rubber pipe—it’s a model-specific EVAP hose referenced for GT 535 Euro 4 parts diagrams and dealer catalogs. If your bike has been de-canistered / EVAP removed, verify your current routing before ordering to avoid mismatch. Also note: some catalogs show 1010167/A as an older reference that is superseded by 1010167/B. 

Key Features 

• Genuine Royal Enfield part number 1010167/B 

• OEM application: Hose T-Connector to Canister (GT)

• Designed for EVAP emission system routing on GT 535 Euro 4 

• Helps prevent vapour leaks, hose disconnections, and EVAP vacuum issues

• Correct hose sizing/shape for factory plumbing (reduces “cut-to-fit” mistakes) 

• Ideal during EVAP service / canister inspection / hose refresh

• Supersession clarity: replaces older 1010167/A references in some catalogs 

• Sold as 1 hose (single piece)

Compatibility Table 

Explicit Exclusions (return-reduction)

• ❌ Continental GT 650 / Interceptor 650 (different EVAP parts and routing; not confirmed for 1010167/B)

• ❌ Classic/Bullet/Electra/Thunderbird UCE (not confirmed for 1010167/B) 

❓ Verify Fitment (Not Confirmed)

• GT 535 in regions/years without EVAP canister layout or modified EVAP plumbing—confirm by matching the EVAP diagram / send a photo of your canister area.

Variants

• No variants – single SKU (1 hose).

FAQs 

1) What is 1010167/B used for?
It’s the EVAP hose from the T-connector to the charcoal canister on Continental GT 535 Euro 4 EVAP systems. 

2) Is 1010167/B the same as 1010167/A?
Many parts catalogs show 1010167/A as an older reference and indicate a replacement/supersession to 1010167/B. 

3) Will this fit GT 650 / Interceptor 650?
Not confirmed—this part is documented for GT 535 Euro 4 EVAP routing. Use the correct 650 part number to avoid mismatch. 

4) My bike is de-canistered—should I still buy this?
Only if you’re restoring stock EVAP routing. De-canistered bikes often have different hose routing.

5) Does it include clamps or T-connector?
This listing is for the hose only. Hardware is sold separately unless specified.