Galio Double Sided Automotive Foam Tape GAT-006 – 12mm x 0.8mm x 10m | Car Visor, Emblem, Trim & Moulding Tape

Galio GAT-006 Double Sided Automotive Foam Tape – 12mm x 0.8mm x 10m

If you searched for car double tape, double side tape for car, both side tape, two side tape, car accessory double sided tape, door visor tape, car moulding tape, emblem tape or a 3M tape alternative for car accessories, this is the type of automotive mounting tape you are looking for.

Galio GAT-006 is a high-performance automotive acrylic foam double-sided adhesive tape made for a variety of interior and exterior automotive accessory applications. The roll measures 10 metres long x 12 mm wide x 0.8 mm thick.

Important brand note: This is a genuine Galio product. It is not manufactured by 3M. Buyers often search “3M tape” generically when looking for automotive double-sided foam tape, so this product is presented as a Galio automotive tape / 3M-type alternative without representing it as a 3M product.

Exact Product Details

Common Automotive Uses

• Car door visor / rain visor mounting
• Name plate and emblem attachment
• Car badge / logo mounting
• Dashboard attachments
• Interior trim attachment
• Chrome garnish / mirror garnish
• Chrome handle garnish
• Body side moulding
• Rocker moulding
• Bumper corner protection
• Applicable spoiler / exterior trim mounting

Car Door Visor Double Sided Tape

One of the most common uses for GAT-006 is re-taping or fitting compatible car door visors / rain visors. If the old tape has started lifting, become hard, or lost adhesion, remove the old adhesive completely before applying new tape.

Car Emblem, Badge & Logo Tape

Galio specifically shows name plate & emblem attachment as an intended application. It can therefore be used for compatible badges, logos, model emblems and small decorative trim pieces designed for adhesive mounting.

Chrome Garnish & Moulding Tape

Suitable for compatible chrome garnish, chrome handle covers, body side mouldings, rocker mouldings and other trim pieces where the accessory is intended to be mounted using automotive adhesive tape.

Double Side Tape / Both Side Tape / Two Side Tape

Customers use many names for this product: double sided tape, double side tape, double tape, both side tape, two side tape, car foam tape, automotive mounting tape and car accessory tape. GAT-006 belongs to this automotive double-sided acrylic foam tape category.

Is This 3M Tape?

No. This product is made by Galio, not 3M. If you are searching for a 3M automotive double sided tape alternative for common car accessory work, compare the required width, thickness, length and intended application. Galio GAT-006 measures 12 mm x 0.8 mm x 10 m.

Surface Preparation Is Critical

Automotive tape can fail when applied over dust, wax, polish, grease, silicone residue, moisture or old adhesive. Galio therefore provides specific surface-preparation instructions on the package.

Painted Surfaces

Galio recommends cleaning the surface with IPA / Isopropyl Alcohol before applying the tape directly.

Plastic Substrates

For plastic substrates, Galio recommends cleaning with IPA and applying the recommended primer / adhesive promoter before the tape where required.

Repair / Re-Taping Work

For repairs, remove the old tape thoroughly from the substrate, then use Galio Adhesive Promoter where appropriate and apply fresh tape.

12 mm Width x 0.8 mm Foam Thickness

The 12 mm width suits many common accessory mounting edges, while the 0.8 mm acrylic foam thickness provides a compliant adhesive layer between the accessory and mounting surface. Always measure the available mounting area before ordering.

Full 10 Metre Roll

You receive a full 10 metre roll, making it useful for car accessory shops, workshops, detailing studios and DIY owners completing multiple trim or visor installations.

Installation Guide

1. Test-fit and align the accessory before removing the release liner.
2. Remove all old tape and adhesive residue if reinstalling an accessory.
3. Clean the vehicle and accessory mounting surfaces with IPA as recommended by Galio.
4. Allow surfaces to become fully clean and dry.
5. Use an adhesive promoter / primer on applicable plastic or difficult substrates where required.
6. Apply the tape evenly without unnecessary stretching.
7. Trim excess tape neatly.
8. Remove the protective liner only when ready for final installation.
9. Position the accessory carefully.
10. Apply firm, even pressure over the complete taped area.

Important Fitment / Use Note

This is a universal automotive adhesive tape, not a model-specific pre-cut kit. Suitability depends on the accessory, its mounting surface and whether a 12 mm wide x 0.8 mm thick foam tape is appropriate.

Do not use adhesive tape as a substitute for bolts, clips, screws or mechanical fasteners where the accessory manufacturer requires them. Do not rely on this tape alone for safety-critical, structural or heavy-load components unless the component manufacturer specifically approves adhesive-only mounting.

What You Will Receive

1 x Galio GAT-006 Automotive Double Sided Acrylic Foam Tape Roll

• Length: 10 metres
• Width: 12 mm
• Thickness: 0.8 mm

Buyer FAQs

Is this double sided tape?
Yes. It is an automotive double-sided acrylic foam adhesive tape.

Is this “both side tape”?
Yes. “Both side tape” and “two side tape” are common buyer search terms for double-sided adhesive tape.

Is this 3M tape?
No. This is Galio GAT-006, not a 3M-branded product.

Can I use it as a 3M tape alternative for car accessories?
It is a Galio automotive acrylic foam tape intended for many common car accessory mounting jobs. Compare the required 12 mm width, 0.8 mm thickness and application before choosing.

Can I use it for car door visors?
Yes. Door visor attachment is specifically shown by Galio as an intended use.

Can I use it for car emblems and badges?
Yes. Galio specifically lists name plate and emblem attachment.

Can I use it for chrome garnish and chrome handle covers?
Yes, for compatible accessories designed for adhesive tape mounting.

Can I use it for body side moulding / car beading?
Body side moulding is specifically shown on the Galio package. Check that the 12 mm width and 0.8 mm thickness suit the accessory.

Can I use it for dashboard accessories?
Galio lists dashboard and interior trim attachment among the intended applications.

How wide is the tape?
12 mm.

How thick is it?
0.8 mm.

How long is the roll?
10 metres.

What is the part number?
GAT-006.

Should I clean the surface before using it?
Yes. Galio recommends IPA / Isopropyl Alcohol cleaning for applicable surfaces.

Can I put new tape over old tape?
No. Remove old tape and residue first, clean the surface, then apply fresh tape.

Is adhesive promoter included?
No. The package recommends adhesive promoter where required, but this listing is for the tape roll only.

What is the MRP?
₹260 inclusive of all taxes.