Galio GAP-006 Adhesion Promoter / Double Sided Tape Primer 10ml – Car Visor, Emblem, Moulding & Trim

Galio GAP-006 Adhesion Promoter / Double Sided Tape Primer – 10ml

If you searched for double tape primer, double sided tape primer, both side tape primer, car visor primer, adhesion promoter, adhesive promoter, tape sticking liquid, car double tape booster or a 3M tape primer alternative, this is the product category you are looking for.

Galio GAP-006 is a 10 ml automotive adhesion promoter / instant adhesive primer used to prepare a mounting surface before compatible adhesive tape is applied. It is designed to help improve the bond between the substrate and automotive adhesive tape, especially on difficult surfaces or during re-installation work.

Exact Product Details

What Does Galio GAP-006 Do?

GAP-006 is an adhesion promoter. It is applied as a thin coat to the surface before the double-sided tape or adhesive-mounted accessory is installed.

It can be useful where tape is struggling to bond because of the substrate type, previous adhesive failure, or because an old accessory is being re-installed with fresh tape.

Common Automotive Applications

• Car door visor / rain visor installation
• Car emblem / badge / logo mounting
• Chrome garnish installation
• Chrome handle garnish
• Body side moulding / side beading
• Dashboard and interior trim
• Rocker moulding
• Applicable exterior trim and accessory mounting

Double Tape Not Sticking?

When buyers search “double tape not sticking” or “double sided tape booster”, the actual issue is often surface preparation rather than simply needing more tape.

Common causes of poor adhesion include:

• Dust
• Grease
• Wax or polish
• Silicone residue
• Old adhesive
• Moisture
• Difficult plastic substrates

GAP-006 is used as the primer / promoter stage before applying the fresh automotive adhesive tape.

Ideal Companion for Galio GAT-006 Double Sided Tape

Galio's GAT-006 automotive double-sided foam tape packaging itself recommends using an adhesive promoter where required, especially on suitable plastic substrates and in repair / re-taping applications.

This makes GAP-006 a natural companion product for:

• Galio GAT-006 double sided automotive foam tape
• Compatible automotive acrylic foam mounting tape
• Re-taping old car visors
• Re-installing badges, mouldings and garnish

Double-sided tape is not included with GAP-006.

Is This 3M Primer 94?

No. This product is manufactured and sold under the Galio brand and carries part number GAP-006.

If you searched for 3M primer, 3M Primer 94, 3M tape primer or 3M adhesion promoter, you are searching for the same general category of product: a surface primer / adhesion promoter used before adhesive tape. This Galio product must not be represented as genuine 3M.

Is This Glue?

No. GAP-006 is primarily a surface primer / adhesion promoter. The actual double-sided tape or mounting adhesive is separate.

The words “instant adhesive primer” on the package refer to its use as a primer before adhesive installation, not as a replacement for the mounting tape itself.

How to Use

1. Remove old tape and residue if re-installing an accessory.
2. Clean the mounting surface so it is free from dust, grease, wax, polish, silicone residue and moisture.
3. Shake the primer well.
4. Apply a thin coat to the intended mounting surface, as stated on the Galio package.
5. Allow the primer to be used according to the product instructions and the adhesive/tape manufacturer's installation procedure.
6. Apply the compatible automotive double-sided tape or adhesive-mounted accessory.

Always follow the instructions on the product pack and the instructions supplied with the tape or accessory being installed.

Re-Taping an Old Visor or Garnish

For repair work, the recommended approach is:

Remove old tape → clean the surface → apply suitable promoter → install fresh tape → press the accessory firmly into position.

Do not place new double-sided tape directly over old, deteriorated foam tape.

Important Safety Information

• Keep away from heat, sparks and open flame.
• Keep the container closed when not in use.
• Use with adequate ventilation.
• Avoid concentrated vapour exposure.
• Avoid contact with skin and eyes.
• Do not inhale vapours.
• Keep away from children.

Suggested First Aid – As Printed on Pack

If the product comes into contact with the eyes or skin, rinse immediately with water. If irritation persists, seek medical advice.

Storage

• Keep the bottle tightly closed.
• Store away from excessive heat, sparks and flames.
• Store in a ventilated, suitable chemical-storage location.
• Do not leave near welding, grinding, smoking or other ignition sources.

What You Will Receive

1 x Galio GAP-006 Automotive Adhesion Promoter / Primer – 10 ml

Double-sided tape, IPA cleaner, cotton/applicator, accessory and installation tools are not included unless specifically stated.

Buyer FAQs

What is Galio GAP-006?
It is a 10 ml automotive adhesion promoter / primer used before compatible adhesive tape installation.

Is this double sided tape primer?
Yes. “Double sided tape primer” is a common buyer description for this product category.

Is this double tape liquid?
That is a common informal search term, but technically this is an adhesion promoter / primer, not liquid double-sided tape.

Is this an adhesive booster?
It is more accurately described as an adhesion promoter that prepares the surface before tape application.

Is this 3M Primer 94?
No. This is Galio GAP-006, not a 3M-branded product.

Can I use it before automotive double-sided tape?
It is intended as an automotive primer / adhesion promoter before compatible adhesive applications. Follow the tape manufacturer's recommendations for the specific tape being used.

Can I use it with Galio GAT-006 tape?
It is a natural companion to Galio automotive tape applications where an adhesive promoter is recommended.

Can I use it for car door visors?
It can be used as the surface-preparation / adhesion-promoter step for compatible tape-mounted visor installations.

Can I use it for car emblems and badges?
Yes, as a primer/promoter before compatible adhesive mounting.

Can I use it for chrome garnish or body moulding?
Yes, where the accessory is intended for adhesive mounting and the substrate is suitable.

Is the primer itself the glue?
No. The double-sided tape or other mounting adhesive is separate.

How do I apply it?
The package states: shake well and apply a thin coat on the surface.

How much do I get?
10 ml.

What is the part number?
GAP-006.

Is it flammable?
Yes. The package labels it an extremely flammable liquid. Keep it away from heat, sparks and open flame.

What is the MRP?
₹135 inclusive of all taxes.