Harley-Davidson X440 T Clutch Friction Plate Set 7 pcs OEM Combo | HDHACJAE1N002000G + HDHACJAE1N001000G + HDH22203-ACD-000

Restore proper clutch performance with this OEM clutch friction plate set for Harley-Davidson X440 T. This combo includes the complete 7-piece friction plate mix used in the clutch pack: 4 x HDHACJAE1N002000G, 2 x HDHACJAE1N001000G, and 1 x HDH22203-ACD-000.

This set is ideal for motorcycles showing signs of clutch slip, worn friction material, glazing, burnt plates, weak pickup under load, or clutch wear during overhaul. Instead of ordering a single friction plate by mistake, this combo gives the full friction plate combination needed for proper replacement of the friction stack.

Because internal clutch parts are expensive and easy to order incorrectly, fitment should always be checked carefully before purchase. This set is listed for Harley-Davidson X440 T. Do not assume it fits X440, X440X, or Hero Mavrick 440 unless your old parts, VIN, or EPC reference confirm the same clutch stack.

This listing is for friction plates only. It does not include clutch steel plates, springs, pressure plate, basket, hub, bearing, or other internal clutch hardware. For best results, inspect the complete clutch assembly during installation.

Key Features

• OEM clutch friction plate set for Harley-Davidson X440 T
• Complete 7-piece friction plate combo
• Includes all three friction plate types used in the shown clutch stack
• Helps avoid incomplete clutch rebuild orders
• Suitable for slipping clutch, worn clutch plates, and overhaul work
• Clear fitment guidance to reduce costly wrong orders
• Ideal for buyers replacing the full friction pack instead of single plates
• Correct mix of A, B, and C friction disc types
• OEM-style solution for proper clutch rebuild planning
• High-value internal engine spare with buyer-focused fitment warnings

Compatibility

What's in the Box

• 4 x HDHACJAE1N002000G – Disk Clutch Friction A
• 2 x HDHACJAE1N001000G – Disk Clutch Friction B
• 1 x HDH22203-ACD-000 – Disk C Clutch Friction

Total included: 7 friction plates

Installation & Maintenance Notes

• This listing is for the friction plates only.
• It is not a complete clutch overhaul kit.
• Please match your old clutch stack layout before ordering.
• Inspect steel plates, basket condition, hub wear, spring condition, and clutch actuator parts during service.
• Soak new friction plates in the correct engine oil first if required by workshop practice or service manual.
• Do not replace clutch parts based only on symptoms without checking the actual cause.

Before You Order

Important: Do not assume X440, X440 T, X440X, and Mavrick 440 use the same clutch friction pack. Please verify by VIN / EPC / old part match before ordering if your bike is not confirmed X440 T.

This combo includes friction plates only. Steel plates, clutch springs, pressure plate, basket, hub, bearing, and other clutch internals are not included unless purchased separately.

Why Buy From Under The Hood

• Clear buyer-friendly fitment guidance for high-risk OEM spares
• Better clarity on what is included and what is not
• Helpful for workshops and serious owners replacing the full friction stack
• Focused on reducing wrong orders on rare and expensive internal parts

FAQs

1. What is included in this clutch plate combo?
This set includes 7 friction plates total: 4 x HDHACJAE1N002000G, 2 x HDHACJAE1N001000G, and 1 x HDH22203-ACD-000.

2. Is this a full clutch rebuild kit?
No. This is a friction plate set only. Steel plates, clutch springs, pressure plate parts, basket, hub, and bearings are not included.

3. Which bike is this set listed for?
This combo is listed for Harley-Davidson X440 T.

4. Will it fit standard Harley X440?
Please verify by VIN / EPC / old part match before ordering. Do not assume X440 and X440 T use the same clutch plate stack.

5. Will it fit Harley-Davidson X440X?
Please verify before ordering. Cross-fitment should be confirmed by old part match or EPC reference.

6. Will it fit Hero Mavrick 440?
Please verify before ordering. Shared platform does not automatically mean the same clutch friction pack.

7. When should these clutch plates be replaced?
Replace them when the clutch is slipping, the friction material is burnt or worn, pickup feels weak under load, or the clutch is being rebuilt during service.

8. Does this set include all friction plate types needed in the pack?
Yes. This combo includes the full friction plate mix for the listed application: A type, B type, and C type friction discs.

9. What should be checked before ordering?
Please confirm the exact motorcycle variant, old part match, clutch stack layout, and whether only friction plates are required or a larger clutch rebuild is needed.

10. Is HDH22203-ACD-000 also a friction plate?
Yes. It is the Disk C Clutch Friction plate included in this combo.