Hero Genuine Bank Angle Sensor / Tip-Over Cut-Off Sensor for Splendor Plus, Super Splendor, Xpulse 200, Xtreme 200 & Karizma XMR | 35160AAE31099S

Hero Genuine Bank Angle Sensor / Tip-Over Cut-Off Sensor – 35160AAE31099S

Restore the motorcycle’s original tip-over safety function with the Hero Genuine Sensor Assy. Bank Angle, part number 35160AAE31099S. This compact electrical safety sensor detects an abnormal motorcycle lean or fall and works with the vehicle’s electrical control system to stop the engine, helping reduce the risk of the engine continuing to run after the motorcycle has tipped over.

A damaged, internally faulty, incorrectly mounted or disconnected bank-angle sensor can contribute to a no-start condition, intermittent engine cut-off, engine stopping after vibration or impact, or failure of the intended fall-detection safety function. Because similar sensors and connectors can look alike, the complete part number, mounting orientation and electrical connector must be matched before ordering.

This listing is for one bank-angle sensor assembly only. It is not a speed sensor, side-stand switch, neutral switch, ignition-control unit, ECU, relay, fuel-pump unit or complete wiring harness.

What This Product Is

• Hero Genuine motorcycle bank-angle sensor assembly
• Official description: Sensor Assy. Bank Angle
• Hero part number: 35160AAE31099S
• Catalogue-format part number: 35160-AAE-310
• Common buyer names: tip-over sensor, fall sensor, lean-angle cut-off sensor, roll-over sensor and engine cut-off sensor
• Function: detects abnormal tilt/fall conditions and supports automatic engine shut-off
• Product type: model-specific electrical safety sensor
• Supply form: one manufacturer-packed sensor

Key Features

• Genuine Hero electrical safety component
• Designed to restore the specified tip-over engine cut-off function
• Model-specific connector, internal calibration and mounting design
• Helps prevent the engine from continuing to run after an abnormal fall condition
• Useful replacement when the original sensor is physically damaged or diagnostically confirmed faulty
• Correct OEM fit when matched by complete part number and vehicle catalogue
• Durable compact construction for motorcycle operating conditions
• No modification, wire cutting or universal adaptation should be required on a confirmed application
• One sensor assembly supplied
• Current Hero MRP reference: ₹245 inclusive of taxes

Confirmed Compatibility

Exact Indian-Market Model References

• Hero Splendor+ iBS BSVI (Feb, 2020)
• Hero Splendor+ iBS BSVI (Oct, 2020)
• Hero Splendor+ iBS BSVI (Jan, 2021)
• Hero Splendor+ iBS BSVI (July, 2021)
• Hero Splendor+ iBS BSVI (Aug, 2021)
• Hero Splendor+ iBS BSVI (Dec, 2021)
• Hero Splendor Plus XTEC (May, 2022)
• Hero Splendor+ Canvas (Jan, 2023)
• Hero Splendor Plus (Jan, 2023)
• Hero Splendor+ Sports (Sept, 2023)
• Hero Super Splendor FI-BSVI (Oct, 2021)
• Hero Super Splendor BSVI (Jan, 2023)
• Hero Super Splendor Techno (Feb, 2023)
• Hero Karizma XMR (Sept, 2023)

Official Hero Model-Family Applicability

• Hero Splendor Plus family — only variants using part number 35160AAE31099S
• Hero Super Splendor family — only variants using part number 35160AAE31099S
• Hero Xpulse 200 family — exact generation and market specification must be confirmed
• Hero Xtreme 200 family — exact generation and market specification must be confirmed
• Hero Karizma XMR — confirmed September 2023 reference

Exact Export-Market References

• Hero Xpulse 200 4V EU5 (Sept, 2023) — export specification
• Hero Xpulse 200 4V EU4 (Nov, 2023) — export specification
• Hero Xpulse 200 4V EUV OBD2B (Nov, 2024) — export specification
• Hero Hunk 250 LATAM (May, 2025) — export specification

Compatibility boundary: A shared model name does not guarantee the same sensor. Do not extend fitment to older carburettor models, unrelated Splendor/Hunk/Xtreme generations, scooters or another vehicle unless the chassis/VIN-based catalogue specifies 35160AAE31099S.

Fitment Note / Return Prevention Note

Before ordering, match the complete part number 35160AAE31099S or catalogue number 35160-AAE-310 with the motorcycle’s original sensor and chassis/VIN-based parts catalogue.

Confirm all of the following:

• Exact motorcycle model, variant and production generation
• Indian-market or export-market specification
• Electrical connector shape and locking tab
• Number and arrangement of connector pins
• Sensor casing and mounting-hole layout
• Original mounting bracket and upright orientation
• Part number printed on the old sensor or packaging

The sensor must be installed in the original bracket position and orientation. An incorrectly rotated, inverted, loosely mounted or hanging sensor can produce incorrect operation. Do not bypass the bank-angle sensor, join wires directly or use a universal resistor-based workaround, as this can disable an important safety function and may create additional electrical faults.

A motorcycle that does not start or cuts off intermittently should be properly diagnosed before this sensor is replaced. Similar symptoms may be caused by a weak battery, loose earth connection, damaged wiring, corroded connector, side-stand interlock, ignition switch, kill switch, fuel-pump circuit, injector circuit, ECU fault, immobiliser issue or another sensor.

Electrical return protection: Match the SKU, connector and vehicle before opening or installing. Electrical parts are not eligible for return after connection, testing, installation, wire modification, physical damage or use.

What You Will Receive

• 1 × Hero Genuine Sensor Assy. Bank Angle
• Part number: 35160AAE31099S
• One manufacturer-packed bank-angle/tip-over sensor

Not included: mounting bracket, bolt, rubber holder, wiring harness, connector repair kit, ECU, relay, fuel pump, side-stand switch, diagnostic service or installation labour unless specifically stated separately.

Technical Details

Installation Note

Professional diagnosis and installation are strongly recommended. Switch off the ignition and disconnect the battery according to the motorcycle’s service procedure before disturbing the sensor connector.

During installation:

• Compare the new and old sensor part numbers before connection
• Inspect the connector for corrosion, bent terminals, looseness or water entry
• Use the original mounting location and bracket
• Maintain the prescribed upright direction and casing orientation
• Do not force the connector or interchange pins
• Do not splice, bypass or short the sensor wiring
• Secure the wiring away from heat, sharp edges and moving parts
• Clear diagnostic fault codes where the service procedure requires it

After installation, confirm normal starting and engine operation, check that no warning lamp or fault code remains, and verify the safety system according to the authorised service procedure. Do not deliberately drop the motorcycle to test the sensor.

Buyer-Focused FAQs

1. What is Hero part number 35160AAE31099S?
It is a Hero Genuine bank-angle sensor assembly used to detect an abnormal motorcycle lean or fall and support automatic engine shut-off.

2. Is this also called a tip-over sensor?
Yes. Bank-angle sensor, tip-over sensor, fall sensor, lean-angle cut-off sensor and roll-over sensor are common terms for this component.

3. Is it a speed sensor?
No. This part does not measure wheel or vehicle speed. A speed sensor is a different component with a different function and part number.

4. Is it the side-stand sensor?
No. The side-stand switch detects side-stand position. The bank-angle sensor detects abnormal vehicle tilt or a fall.

5. Does it fit Hero Splendor Plus?
Yes, confirmed applications include selected Splendor+ iBS BSVI variants from February 2020 through December 2021, Splendor Plus XTEC May 2022, Canvas and standard January 2023 references, and Splendor+ Sports September 2023.

6. Does it fit Hero Super Splendor?
Confirmed applications include Super Splendor FI-BSVI October 2021, Super Splendor BSVI January 2023 and Super Splendor Techno February 2023. Match the exact SKU before ordering.

7. Does it fit Hero Xpulse 200?
Hero lists Xpulse 200 among the applicable families. Exact export references include Xpulse 200 4V EU5 September 2023, EU4 November 2023 and EUV OBD2B November 2024. Indian-model generation fitment must be checked by part number.

8. Does it fit Hero Karizma XMR?
Yes, Karizma XMR September 2023 is a confirmed model reference.

9. Does it fit Hero Xtreme 200?
Hero lists Xtreme 200 among the compatible model families, but the exact generation and connector must be matched before ordering.

10. Does it fit Hunk 250?
The Hunk 250 LATAM May 2025 export specification is confirmed. This does not automatically confirm fitment for older Indian Hunk 150 or other Hunk models.

11. Can a faulty bank-angle sensor stop the motorcycle from starting?
It can contribute to a no-start or engine cut-off condition if it is faulty, incorrectly mounted, disconnected or if its wiring is damaged. Proper electrical diagnosis is required because many other faults can create similar symptoms.

12. Can this sensor be bypassed?
Bypassing is not recommended. It can disable a safety function, create electrical faults and affect correct vehicle operation.

13. Does it need programming?
No universal programming requirement is being claimed. Installation and diagnostic steps depend on the motorcycle. Follow the model-specific service procedure and clear stored fault codes where required.

14. Is the mounting bracket included?
No. This listing is for the sensor assembly only unless the sealed Hero pack specifically contains additional hardware.

15. Can I return it after testing on the motorcycle?
No. Because it is an electrical component, fitment must be confirmed before connection. Connected, tested, installed, modified or used electrical parts are not returnable.

16. How can I confirm fitment before ordering?
Match the complete SKU, exact model and generation, market specification, connector, pin layout, casing, mounting orientation and chassis/VIN-based Hero parts catalogue.

Electrical Component Purchase Warning

Do not connect this sensor merely for trial. Verify the part number and compatibility before opening the pack. Installation, testing, connector damage, incorrect polarity, wire modification, water damage or use can permanently affect an electrical component and invalidate return eligibility.