Hero Genuine Carburettor Assembly (Carburetor Assy) for Passion Pro | Part No 16100KWA935S

Product Description

Restore factory-like pickup and smooth idling with the Hero Genuine Carburettor Assembly (also called carburetor assy / carb assembly complete) for Passion Pro, OEM part number 16100KWA935S. This is the complete carburettor assembly supplied as a single unit (Qty: 1), intended for carburetted setups—not for fuel-injected (FI) throttle bodies.

If your bike is showing classic carb symptoms—hard start in the morning, engine dying at idle, flat spots on acceleration, fuel smell/overflow, black smoke, or sudden mileage drop—replacing the full carburettor assembly is often faster and more reliable than repeated cleaning on worn internal passages. A correct-spec carb restores the calibrated fuel–air mix so the engine starts clean, idles steadily, and responds crisply to throttle input.

Unlike vague “fits all” aftermarket carbs, this listing is built around the exact part number and the official catalogue applicability. Year guidance from the catalogue is 2008 - 2014 (where specified). Before ordering, match your old unit’s stamping/label, and confirm your variant (carb vs FI, i3S/other sub-variants) using VIN/engine code if needed. For reference, the catalogue MRP for this part is ₹2166 (pricing may vary by seller and date).

Also searched as: carburettor assy, carburetor assembly, carb body complete, carburettor complete set, fuel-air mixer, carb chamber, carb replacement, carb throttle response fix, jetting calibrated carb, 16100KWA935S carburettor, 16100KWA935S carburetor, Passion Pro carb, Passion Pro carburettor assembly, Hero OEM carb.

Return-Prevention Fitment Check (Read Before Buying)

• Match the part number 16100KWA935S with your old carburettor / invoice (do not rely on bike name only).
• Verified application targets: Passion Pro (see table). Catalogue year guidance: 2008 - 2014 where specified.
• Confirm your bike is carburettor type. If your bike has FI/throttle body + injector, this part will NOT fit.
• Do not mix up similar families (Splendor+ vs Splendor Pro vs iSmart; Glamour Carb vs Glamour FI; Karizma vs Karizma ZMR).
• If your model/registration year is outside the verified range, treat fitment as VIN/engine-code verification required.

Key Features

• OEM-spec fuel–air metering for stable idle and smoother throttle response (when the correct part number is used).
• Complete carburettor assembly unit for faster replacement vs. repeated cleaning on worn carbs.
• Factory-calibrated jetting and passages to help restore mileage and reduce stalling.
• Direct-fit mounting geometry for listed models (verify carb vs FI first).
• Corrosion-resistant body and hardware for long-term reliability.
• Helps fix common complaints: hard start, erratic idle, poor pickup, fuel overflow, black smoke (when carb is root cause).
• Works best with fresh air filter and clean fuel lines (recommended during installation).
• Ideal for workshop replacement jobs—reduces downtime and repeat visits.
• Pack quantity: 1 unit (carburettor assembly).
• Traceable by part number: 16100KWA935S (use for cross-checking).

Compatibility Table (Critical)

What’s in the box

• 1 x Carburettor Assembly (Part No: 16100KWA935S)
• Packaging as per supplier (gaskets not included unless stated on invoice).

Installation notes (workshop-friendly)

• Install at a workshop: remove fuel line, drain old fuel, disconnect throttle/choke cable, and replace the unit.
• Replace/inspect intake-manifold gasket and airbox hose; air leaks cause high idle and lean running.
• After installation: set idle speed, confirm choke operation, and check for fuel leaks/overflow.
• Test ride and verify pickup across low/mid throttle; re-check spark plug color after a short run.
• If the bike has FI/throttle body, stop—this carburettor assembly is not applicable.

FAQs

Q. Is this a genuine Hero carburettor assembly?
This listing is for the Hero carburettor assembly by part number 16100KWA935S. Always match the part number on your old carb / invoice before ordering.

Q. Will it fit my bike if the seller said “fits all”?
No. Carburettors are model- and tuning-specific. Use the compatibility table and verify your carb is not FI/throttle-body type.

Q. How do I confirm my bike is carburettor or FI?
Carb models have a carb body with float bowl and manual/auto choke; FI models have a throttle body + injector + fuel pump. If FI, this part will NOT fit.

Q. Do I need to change jets or settings after installation?
Typically no for the correct part number. Still, a mechanic should set idle speed, check mixture and ensure there are no air leaks.

Q. What are common symptoms of a failing carburettor?
Hard starting, poor pickup, erratic idle, stalling, fuel smell/overflow, black smoke, and sudden mileage drop.

Q. Does it include gasket / intake manifold?
No. This is the carburettor assembly only unless your invoice states otherwise. Reuse or replace gaskets as needed.

Q. Can I install it myself?
Recommended to install at a workshop. Incorrect routing of throttle cable or wrong tuning can cause poor running or engine damage.

Q. What if my bike year is outside the listed years?
Do not assume fitment. Variants and BS stage changes can alter carb type. Use VIN/engine-code verification and match the old carb stamping/part number.

Q. Is it compatible with BS6 models?
BS6 bikes are generally fuel-injected. This carburettor assembly is intended for carburetted setups only, as per part-number mapping.

Q. Return policy tip: what should I check before ordering?
Confirm part number, model/variant, and whether your bike is carb or FI; compare mounting flange and choke/throttle cable connections with your old unit.