Hero Genuine CVT Movable Driven Face Kit for Maestro Edge 125, Maestro Edge 125 BSVI | 23224AAW300S

Hero Genuine CVT Movable Driven Face Kit – 23224AAW300S

This listing is for the Hero Genuine CVT Movable Driven Face Kit identified by exact part number 23224AAW300S. Select this component by complete part number and chassis/VIN-based EPC confirmation—not by visual similarity, shared engine capacity or a broad model-family name.

Confirmed Compatibility

Compatibility is limited to the exact EPC-supported applications listed below. Do not assume compatibility with another model, generation or variant merely because the component looks similar or shares an engine family.

• Hero Maestro Edge 125 (May 2019)
• Hero Maestro Edge 125 BSVI (Jul 2021)

Fitment Note / Return Prevention Note

• Match every letter, number and suffix in the SKU.
• Confirm the exact motorcycle or scooter model, variant, production generation and applicable EPC assembly.
• Compare the old part's side, connector, mounting points, dimensions and surrounding components before opening the package.
• Do not install, energise, fill, lubricate, machine or modify the component merely to test compatibility.
• Installed, electrically tested, fuel-exposed, oil-exposed, marked, scratched or modified parts cannot be treated as unused returns.

What This Product Is

• Hero Genuine rear CVT movable driven-face set
• Official retail description: Face Kit Movable Driven
• Catalogue description: Face Set Movable Driven
• Hero part number: 23224AAW300S
• Catalogue-format part number: 23224-AAW-300
• Common buyer names: movable driven face, rear pulley face, secondary pulley face, clutch-side pulley face, torque-driver face and fan-belt left driven face
• System: scooter CVT / driven-face and centrifugal-clutch assembly
• Catalogue position: rear driven-pulley assembly, normally reference 8
• Catalogue quantity: one set per compatible driven-face assembly
• Supply form: one manufacturer-packed movable driven-face kit/set

Key Features

• Genuine Hero CVT transmission component
• Designed for the specified AAW-series driven-pulley architecture
• Supports smooth axial movement of the rear pulley face
• Helps the CVT vary the effective rear-pulley diameter
• Supports correct belt travel and automatic ratio change when the complete CVT is serviceable
• Model-specific face profile, bore, guide arrangement and spring relationship
• Suitable replacement when the matching original face is worn, grooved, seized or physically damaged
• Better fitment confidence than selecting a generic rear pulley face by appearance
• One manufacturer-packed movable driven-face set supplied
• Current Hero MRP reference: ₹515 inclusive of taxes

What You Will Receive

• 1 × Hero Genuine Face Kit Movable Driven
• Part number: 23224AAW300S
• One manufacturer-packed rear movable driven-face set/kit

Not included unless physically present inside the sealed Hero pack:

• Fixed driven-face set
• Complete clutch outer / clutch bell
• Clutch shoe or clutch-weight assembly
• Clutch springs or dampers
• Drive belt
• Front variator or movable drive face
• Driven-face spring
• Guide pins or guide rollers
• Seal collar or spring collar
• Bearings, oil seals or O-rings
• Nuts, washers or circlips
• CVT-cover gasket
• Grease or transmission lubricant
• Installation or CVT-overhaul labour

Technical Details

Installation Note

CVT and driven-pulley work should be performed by a trained scooter transmission technician. The driven-face spring is under substantial preload, and incorrect dismantling can cause serious injury or component damage.

Before Installation

• Confirm the old and new movable-face part numbers
• Compare the face profile, bore and guide arrangement
• Inspect the drive belt for cracking, glazing, width loss and contamination
• Inspect the fixed driven face for grooves or heat damage
• Check the guide pins, guide grooves and collars
• Inspect the driven-face spring against the model specification
• Check bearings for noise, play or seizure
• Inspect oil seals and O-rings for leakage or hardening
• Inspect clutch shoes, clutch springs and clutch bell
• Check the front variator and rollers
• Identify the root cause of the original wear or overheating

During Installation

• Use a proper clutch and driven-pulley spring compressor
• Do not release the spring preload uncontrolled
• Install every guide pin, collar, seal, bearing, washer and circlip in the prescribed order
• Use only the specified lubricant at approved internal points
• Keep grease away from the belt and pulley faces
• Do not file, sand or polish the working faces to force fitment
• Confirm smooth axial movement before final assembly
• Use the correct nuts and locking method
• Tighten all CVT and clutch fasteners to the prescribed torque
• Confirm correct drive-belt direction and position where applicable

After Installation

• Rotate the driven pulley and clutch by hand
• Confirm smooth movement without binding
• Check that the belt sits correctly in both pulleys
• Install the CVT cover and gasket correctly
• Start the engine with the scooter safely supported
• Listen for abnormal rubbing, rattling or grinding
• Confirm smooth take-off and consistent acceleration
• Stop immediately if the CVT overheats, vibrates or produces abnormal noise

Buyer-Focused FAQs

How should fitment be confirmed?
Match the complete part number with the motorcycle's chassis/VIN-based Hero EPC. A shared model name, appearance or engine capacity is not enough.

Can the part be installed only to check compatibility?
No. Confirm the EPC, physical design and related assembly before opening or installation.

What will be supplied?
One Hero Genuine component under part number 23224AAW300S, subject to the exact contents of the sealed manufacturer package.