Hero Genuine Front Brake Cable – Splendor+ / Passion Pro / Passion XPro / Glamour – 45475AAT200S

Keep your Hero commuter’s braking sharp and predictable with the Hero Genuine Front Brake Cable (Part No. 45475AAT200S). This is the OEM Cable Comp, Front Brake used by Hero MotoCorp for popular models like Splendor+, Passion Pro, Passion XPro and Glamour with front drum brakes. 

Over time, brake cables can stretch, rust internally or develop rough spots that make the front lever feel hard, sticky or spongy. Replacing it with the correct Hero genuine cable restores smooth lever action and consistent braking response – especially important for daily city commutes and emergency stops in traffic.

This cable uses black PVC outer sheathing for flexibility and protection, and an OEM pre-stretched inner wire that’s flared before casting for better pull-out resistance, as highlighted by Hero’s own listing. That means correct length, proper end fittings and long service life compared to local cables.

Buy from Under The Hood to ensure you get a fresh, Hero Genuine packed part, shipped safely with invoice, GST and responsive support if you need help confirming compatibility with your bike’s variant (IBS / non-IBS, drum front). It’s a simple, low-cost part that directly affects your stopping power – don’t compromise.

Key Features

• Genuine Hero Front Brake Cable – OEM Cable Comp, FR Brake for Hero commuter motorcycles, part number 45475AAT200S. 

• Confirmed Model Applicability – Official Hero listing shows use on Splendor+, Passion Pro, Passion XPro and Glamour front drum-brake variants. 

• Black PVC Outer Sheath – Flexible protective jacket resists kinks, weather and minor abrasion for long cable life. 

• Pre-Stretched Inner Wire – OEM pre-stretched and flared inner cable for smooth lever feel and improved pull-out resistance at the terminal ends. 

• Correct Length & End Fittings – Designed specifically for Hero lever and brake panel geometry; no improvisation or bending of nipples required. 

• Improves Braking Feel – Helps restore linear, predictable front brake operation compared to old, rough or stretched cables.

• Ideal for Service & Overhaul – Recommended whenever the lever feels hard, sticky, or during major brake service and cable inspection intervals.

• High Reliability vs Local Cables – Genuine Hero cables are tested for pull strength and fatigue, unlike many unbranded alternatives. 

• Packed & Shipped Safely by Under The Hood – Protective packing to avoid kinks in transit; invoiced genuine part with proper documentation.

Compatibility Table

(Only models confirmed by Hero catalogue / official listing and multiple dealer sources.)

PLEASE CHECK PART NUMBER BEFORE PURCHASE 

Important Note:
For safety-critical brake components, customers should match the part number (45475AAT200S) against their existing cable or confirm via Hero dealer / VIN-based parts lookup before purchase, especially for newer Glamour and Passion variants where disc-brake versions exist.

Variants

• Single Genuine Part Number:

  • Hero Genuine Cable Comp, Front Brake – 45475AAT200S

• No LH/RH or color variants – this is a single front brake cable for the models listed.

What’s in the Box

• 1 × Hero Genuine Front Brake Cable – CABLE COMP FR BRAKE (Part No. 45475AAT200S)

• OEM Hero polybag packing (as supplied by Hero MotoCorp)

No levers, adjusters or brake shoes are included – those are sold separately.

Installation & Maintenance Notes

• Recommended to be installed by a qualified mechanic; front brake is safety-critical.

• When replacing the cable:

  • Route it exactly as per original path to avoid sharp bends.

  • Lubricate pivot points on the lever and brake arm if recommended by Hero.

  • Adjust free play at the lever so braking starts after a small, comfortable movement (as per owner’s manual).

• Inspect the old cable for frayed strands or rust – if present, replace immediately.

• Periodically check new cable for:

  • Smooth lever feel

  • No kinks or crushed outer

  • Proper return of the brake arm when released

FAQs

Q1. Will this front brake cable fit my Hero Splendor+?
Yes. Part number 45475AAT200S is listed by Hero MotoCorp as the genuine front brake cable for Splendor+ (including IBS drum variants). Always confirm that your bike uses a front drum brake, not a front disc. (CHECK PART NUMBER )

Q2. Is this cable also suitable for Passion Pro and Passion XPro?
Yes. Hero’s parts catalogue and official e-store show Passion Pro and Passion XPro in the applicability list for 45475AAT200S. If your bike is one of these models with a front drum brake, this is the correct OEM front brake cable. 

Q3. Does this fit disc brake models?
No. This cable is specifically for front drum brake systems. Hero models with front disc brake use a hydraulic brake hose instead of a cable. Do not order this cable for disc-brake variants.

Q4. Is this original Hero or a local duplicate cable?
This product is sold as a genuine Hero MotoCorp spare part, in Hero branded packing, with part number 45475AAT200S and proper GST billing. Under The Hood does not mix this listing with unbranded local cables.

Q5. When should I replace my front brake cable?
Replace the cable if you notice:

• Hard or sticky lever movement

• Visible fraying at cable ends

• Rusted or damaged outer sheathing

• Uneven or delayed brake response
  Hero recommends inspecting control cables regularly during service; if in doubt, replace for safety.