Hero Genuine Front Brake Disc Rotor (5-Hole) for Xpulse 200/200T, Xtreme 125, Karizma – Part No. 45251KRY971S

Buy Hero Genuine Front Brake Disc / Disc Plate (5-hole fitting)—the correct OEM rotor for select Xpulse 200 / Xpulse 200T and Karizma applications, supplied as Part No. 45251KRY971S. Genuine fitment matters for braking feel, pad life, and safety—especially on higher-speed touring and ADV usage.

DETAILED DESCRIPTION

The front brake disc (disc rotor / disc plate) is the primary rotating braking surface your front brake pads clamp onto to slow the wheel. On bikes like Hero Xpulse 200 / Xpulse 200T and Karizma, a worn, warped, or low-quality disc can cause pulsation at the lever, uneven pad wear, longer stopping distances, and noisy braking—all of which directly affect control and confidence.

This is a Hero Genuine “DISK, FR BRAKE / Disk Front Brake (5 holes screw fitting)” supplied as Part No. 45251KRY971S. OEM discs are engineered for the correct mounting hole pattern, metallurgy, heat management, and flatness so the rotor runs true with the stock caliper and hub. That means better braking consistency and reduced chances of vibration compared to many local/duplicate rotors.

Common workshop/customer names for this part include Front Disc Plate, Disc Rotor, Front Brake Tali—all referring to the same front rotor assembly.

At underthehood.co.in, we focus on genuine Hero packaging, careful packing, and quick dispatch, so you receive the correct part number and avoid counterfeit supply-chain risks common in brake components.

KEY FEATURES / BENEFITS

• Genuine Hero MotoCorp brake rotor – correct OEM fit and finish

• 5-hole screw fitting for the specified front wheel hub pattern

• Helps reduce disc wobble / vibration versus poor-quality rotors (when installed correctly)

• Supports consistent braking feel and predictable pad contact

• Common names: Front Disc Plate / Front Brake Tali / Disc Rotor

• Supplied as single unit (Net Qty: 1)

• Correct choice for routine service when the disc is scored, thin, or warped

• Best practice: replace/inspect pads and caliper pins during disc replacement

COMPATIBILITY TABLE

Only models confirmed via Hero listing + parts catalog references / marketplace listings are included below.

Note (important): If your bike has had a hub/disc swap or you are unsure of variant, please confirm using part number 45251KRY971S with your Hero ASC before ordering.

TECHNICAL SPECIFICATIONS 

• Part Number: 45251KRY971S

• Category: Brake Disc / Front Brake Disc Rotor

• Hero description (as listed): “DISK, FR BRAKE / Disk Front Brake (5 holes screw fitting)”

• Mounting: 5-hole screw fitting

• Net Quantity: 1 unit

• Approx. Product Weight (listed): 1090 g

• Package Dimensions (listed): 32L × 35W × 3H cm

• Country of Origin: India

WHAT’S IN THE BOX

• 1 × Hero Genuine Front Brake Disc Rotor – Part No. 45251KRY971S

INSTALLATION & USAGE NOTES

• Recommended installation by Hero Authorised Service Centre or an experienced mechanic.

• Clean the hub face; ensure no rust/paint causes disc runout before tightening.

• Tighten disc bolts as per Hero service manual sequence/spec (avoid over-torque).

• Inspect/replace front brake pads if uneven, glazed, or near limit.

• After install: do a slow test ride and bed-in pads safely; avoid aggressive braking initially.

FAQs 

Q1. Is 45251KRY971S an original Hero front brake disc or aftermarket?
It is a Hero Genuine part number (OEM rotor) when supplied in genuine Hero channel packaging.

Q2. What are the common names for this part in the market?
Common names include Front Disc Plate, Disc Rotor, and Front Brake Tali—all refer to the same front rotor.

Q3. Will this disc fit my Hero Xpulse 200 / Xpulse 200T?
Parts catalogue references list 45251-KRY-971 as “DISK, FR BRAKE” for Xpulse 200 / 200T. Match your exact variant with ASC for final confirmation.

Q4. Does this rotor use a 5-bolt / 5-hole mounting?
Yes—Hero’s listing describes it as “5 holes screw fitting.”

Q5. My front brake is vibrating while braking—will changing the disc solve it?
If the disc is warped/scored, replacement helps. Also check pads, caliper slide pins, wheel bearings, and proper bolt torque.

Q6. Should I change brake pads when changing the disc?
Strongly recommended to inspect and replace if worn/uneven—fresh pads bed-in better on a new rotor.

Q7. How do I confirm fitment before ordering online?
Share part number 45251KRY971S with your Hero ASC (or match via EPC/VIN lookup). This avoids ordering errors due to variant changes.