Hero Genuine Fuel Injector for Xpulse 200T OBD-II, Xpulse 200 4V, Xpulse 200 OBD-II 4V | 16450ABW801S

Hero Genuine Fuel Injector – 16450ABW801S

This listing is for the Hero Genuine Fuel Injector identified by exact part number 16450ABW801S. Select this component by complete part number and chassis/VIN-based EPC confirmation—not by visual similarity, shared engine capacity or a broad model-family name.

Confirmed Compatibility

Compatibility is limited to the exact EPC-supported applications listed below. Do not assume compatibility with another model, generation or variant merely because the component looks similar or shares an engine family.

• Hero Xpulse 200T OBD-II (Jun 2023)
• Hero Xpulse 200 4V (Nov 2024)
• Hero Xpulse 200 OBD-II 4V (Apr 2023)
• Hero Xpulse 200 4V Dakar Edition (Jan 2025)
• Hero Xtreme 200S FF BS-VI OBD-II (Jul 2023)
• Hero Xpulse 200 4V (Oct 2021)
• Hero Xpulse 200 4V (Jul 2022)
• Hero Xpulse 200T 4V FI (Jan 2023)

Fitment Note / Return Prevention Note

• Match every letter, number and suffix in the SKU.
• Confirm the exact motorcycle or scooter model, variant, production generation and applicable EPC assembly.
• Compare the old part's side, connector, mounting points, dimensions and surrounding components before opening the package.
• Do not install, energise, fill, lubricate, machine or modify the component merely to test compatibility.
• Installed, electrically tested, fuel-exposed, oil-exposed, marked, scratched or modified parts cannot be treated as unused returns.

What This Product Is

• Hero Genuine electronically controlled fuel-injector assembly
• Official description: Injector Assy. Fuel
• Hero retail part number: 16450ABW801S
• Catalogue-format part number: 16450-ABW-801
• Common buyer names: fuel injector, petrol injector, FI injector, injector nozzle and electronic injector
• System: electronic fuel injection
• Engine application: specified Hero 200 cc four-valve / OBD fuel-injected engines
• Catalogue position: E-11A Fuel Injector Assy. / Inlet Pipe, reference 5
• Catalogue quantity: one injector per compatible engine
• Supply form: one manufacturer-packed injector assembly

Key Features

• Genuine Hero electronic fuel-metering component
• Designed for the specified Hero 200 cc four-valve ECU and inlet system
• Meters pressurised petrol according to ECU commands
• Supports correct starting, idling and throttle response when the injector is the confirmed fault
• Model-specific electrical connector, body, nozzle and sealing arrangement
• Designed to work with the matching injector cap, seal ring, O-ring and inlet pipe
• Suitable replacement when the matching original injector is clogged, leaking, electrically faulty or physically damaged
• Better fitment confidence than selecting an injector only by appearance or connector shape
• One Hero Genuine injector assembly supplied
• Current Hero MRP reference: ₹2,285 inclusive of taxes

What You Will Receive

• 1 × Hero Genuine Injector Assy. Fuel
• Part number: 16450ABW801S
• One manufacturer-packed fuel injector assembly

Not included unless physically present inside the sealed Hero pack:

• Injector-cap assembly
• Injector seal ring
• Injector O-rings
• Inlet pipe / intake manifold
• Throttle body
• Fuel hose or fuel rail components
• Fuel pump or pump filter
• Injector wiring connector or harness
• ECU or sensors
• Mounting nuts or bolts
• Injector cleaning, flow testing or installation labour

Technical Details

Installation Note

Fuel-injector diagnosis and installation should be performed by a trained fuel-injection technician. Petrol and petrol vapour are highly flammable. Work in a well-ventilated area away from flames, sparks, smoking, hot surfaces and static-discharge risks.

Before Installation

• Confirm the old and new injector part numbers
• Read diagnostic fault codes and live data where supported
• Check battery and charging-system voltage
• Inspect the injector connector and wiring
• Measure fuel pressure according to the service procedure
• Inspect the pump filter and fuel hose
• Compare injector body, connector, nozzle and seal arrangement
• Inspect the injector cap and inlet pipe
• Obtain the correct new seal ring and O-rings where required
• Drain or relieve fuel pressure using the approved procedure
• Identify the root cause of contamination or injector failure

During Installation

• Disconnect the battery according to the service procedure
• Keep sparks and ignition sources away from petrol
• Do not pull the injector by its connector or nozzle
• Keep dirt away from the injector and inlet passage
• Do not touch or damage the nozzle tip
• Install the correct seal ring and O-rings
• Do not twist, cut or pinch the seals
• Seat the injector squarely in the cap and inlet pipe
• Install the correct mounting hardware
• Tighten fasteners evenly to the prescribed torque
• Fully engage the electrical connector and locking tab

After Installation

• Prime or pressurise the fuel system according to the service procedure
• Inspect every injector seal and fuel connection for leakage
• Start the engine only after confirming there is no petrol leak
• Check starting, idle quality and throttle response
• Verify injector operation and diagnostic data where required
• Recheck for leakage after the engine has warmed
• Stop immediately if petrol smell, leakage, misfire, electrical heating or an FI warning remains

Buyer-Focused FAQs

How should fitment be confirmed?
Match the complete part number with the motorcycle's chassis/VIN-based Hero EPC. A shared model name, appearance or engine capacity is not enough.

Can the part be installed only to check compatibility?
No. Confirm the EPC, physical design and related assembly before opening or installation.

What will be supplied?
One Hero Genuine component under part number 16450ABW801S, subject to the exact contents of the sealed manufacturer package.