Hero Genuine Fuel Pump Assembly for Splendor Plus, Splendor Plus Sports BSVI OBD-II, Splendor Plus OBD-IIB / OBD2B | 16700AAE300S

Hero Genuine Fuel Pump Assembly – 16700AAE300S

This listing is for the Hero Genuine Fuel Pump Assembly identified by exact part number 16700AAE300S. Select this component by complete part number and chassis/VIN-based EPC confirmation—not by visual similarity, shared engine capacity or a broad model-family name.

Confirmed Compatibility

Compatibility is limited to the exact EPC-supported applications listed below. Do not assume compatibility with another model, generation or variant merely because the component looks similar or shares an engine family.

• Hero Splendor Plus (Jun 2024)
• Hero Splendor Plus Sports BSVI OBD-II (Jul 2024)
• Hero Splendor Plus OBD-IIB / OBD2B (Apr 2025)
• Hero Splendor Plus Sports (Sep 2023)
• Hero Super Splendor Techno OBD-II (Feb 2025)
• Hero Super Splendor Techno (Feb 2023)
• Hero Splendor Plus XTEC (May 2022)

Fitment Note / Return Prevention Note

• Match every letter, number and suffix in the SKU.
• Confirm the exact motorcycle or scooter model, variant, production generation and applicable EPC assembly.
• Compare the old part's side, connector, mounting points, dimensions and surrounding components before opening the package.
• Do not install, energise, fill, lubricate, machine or modify the component merely to test compatibility.
• Installed, electrically tested, fuel-exposed, oil-exposed, marked, scratched or modified parts cannot be treated as unused returns.

What This Product Is

• Hero Genuine in-tank electric fuel-pump assembly
• Official description: Unit Assy. Fuel Pump
• Hero part number: 16700AAE300S
• Catalogue-format part number: 16700-AAE-300
• Common buyer names: fuel pump, petrol pump, FI pump, in-tank pump, fuel motor and fuel-pump unit
• System: electronic fuel injection / pressurised petrol delivery
• Installation location: inside the fuel tank
• Catalogue position: F-13 Fuel Tank, reference 1
• Catalogue quantity: one pump assembly per compatible motorcycle
• Supply form: one manufacturer-packed fuel-pump unit

Key Features

• Genuine Hero electronic fuel-system component
• Supplies petrol from the tank to the injector circuit
• Supports consistent starting, acceleration and engine operation when the pump is the confirmed fault
• Model-specific electrical connector, mounting flange, outlet and tank relationship
• Suitable replacement when the matching original pump is weak, seized, electrically damaged or physically defective
• Built for normal fuel exposure, vibration and in-tank operating conditions
• Better fitment confidence than selecting a generic pump by shape or connector alone
• One Hero Genuine fuel-pump assembly supplied
• Current Hero MRP reference: ₹3,035 inclusive of taxes

What You Will Receive

• 1 × Hero Genuine Unit Assy. Fuel Pump
• Part number: 16700AAE300S
• One manufacturer-packed in-tank fuel-pump assembly

Not included unless physically present inside the sealed Hero pack:

• Fuel-pump filter
• Fuel-pump O-ring
• Fuel-pump or tank gasket
• Fuel-pump setting plate
• Fuel-feed hose
• Fuel tank or tank cap
• Mounting bolts, washers or nuts
• Fuel injector
• Throttle body
• ECU, relay, fuse or wiring harness
• Petrol draining, tank cleaning or installation labour
• Diagnostic or fuel-pressure testing labour

Technical Details

Installation Note

Fuel-pump diagnosis and replacement should be performed by a trained fuel-injection technician. Petrol and petrol vapour are highly flammable. Work only in a well-ventilated area away from flames, sparks, smoking, hot surfaces and static-discharge risks.

Before Installation

• Confirm the old and new pump part numbers
• Read diagnostic fault codes where supported
• Check battery and charging-system voltage
• Inspect the pump fuse, relay, connector, wiring and earth
• Measure fuel pressure or delivery according to the service procedure
• Drain petrol using approved fuel-safe equipment
• Inspect the tank for rust, water, dirt and foreign material
• Compare the mounting flange, connector and outlet position
• Obtain new model-correct O-ring and gasket where required
• Inspect the filter and fuel-feed hose

During Installation

• Disconnect the battery according to the service procedure
• Do not create sparks near the open fuel tank
• Do not pull the pump by its electrical wires or outlet
• Clean the tank opening before removing the old pump
• Keep dirt away from the new pump and tank
• Install the correct filter, O-ring and gasket
• Seat the pump squarely without pinching the seal
• Install the setting plate in the correct orientation
• Tighten fasteners gradually and evenly to the specified torque
• Route and lock the fuel hose correctly
• Fully engage the electrical connector and locking tab

After Installation

• Add clean petrol of the correct grade
• Prime the fuel system according to the service procedure
• Inspect the pump flange, hose and tank for leakage
• Start the engine only after confirming there is no leak
• Check starting, idle and throttle response
• Verify fuel pressure and diagnostic data where required
• Recheck for leakage after the engine has operated
• Stop immediately if petrol smell, leakage, electrical heating or abnormal pump noise is present

Buyer-Focused FAQs

How should fitment be confirmed?
Match the complete part number with the motorcycle's chassis/VIN-based Hero EPC. A shared model name, appearance or engine capacity is not enough.

Can the part be installed only to check compatibility?
No. Confirm the EPC, physical design and related assembly before opening or installation.

What will be supplied?
One Hero Genuine component under part number 16700AAE300S, subject to the exact contents of the sealed manufacturer package.