Hero Genuine Engine Guard K50508ACKH700S | HF 100, HF Deluxe, Splendor iSmart & NXG

Hero Genuine Engine Guard / Leg Guard – K50508ACKH700S

Genuine Hero MotoCorp engine guard for compatible HF 100, HF Deluxe, Splendor iSmart and Splendor NXG applications. Hero identifies part number K50508ACKH700S as KIT, GUARD ENGINE. Buyers may also search for this type of component as a Hero leg guard, crash guard, engine safety guard, front engine protector or bike leg protector.

Hero specifically markets this guard as providing a balance of engine / rider protection and styling, with high-strength construction and 4 mm pipe thickness. It is a model-specific genuine Hero accessory / protection part rather than a universal clamp-on guard.

Product Identity

• Brand: Hero MotoCorp Genuine Parts / Accessories
• Part Number: K50508ACKH700S
• Official Hero Description: KIT, GUARD ENGINE
• Common Buyer Names: Engine Guard / Leg Guard / Crash Guard / Engine Protector
• Net Quantity: 1 unit
• Official Listed Weight: 3,850 g
• Official Package Dimensions: 41 × 58 × 1 cm
• Country of Origin: India
• Official Current MRP: ₹370

Primary Hero-Confirmed Fitment

• Hero HF 100 – 2021 to 2025
• Hero HF Deluxe – 2021 to 2025
• Hero Splendor iSmart
• Hero Splendor NXG

Hero's compatibility data also shows this exact SKU across multiple HF-platform catalogue generations, including HF Deluxe iBS / BS6 / OBD-II / OBD2B and HF 100 generations. Because Hero has many closely related commuter platforms and export derivatives, the exact part number should remain the final fitment check for bikes outside the primary Indian applications listed above.

HF Deluxe Generation Coverage

Hero's current compatibility records for K50508ACKH700S include multiple HF Deluxe generations such as:

• HF Deluxe iBS
• HF Deluxe BS6
• HF Deluxe i3S BS6
• HF Deluxe OBD-II
• HF Deluxe OBD2B
• Later 2025 HF Deluxe applications listed by Hero

This broad coverage is useful, but buyers should still match the exact mounting application before ordering—especially where a motorcycle has aftermarket bodywork, frame modification or a non-standard existing guard.

HF 100 Coverage

Hero specifically markets this engine guard for HF 100 models from 2021 to 2025, and its compatibility records include HF 100 catalogue generations from the early BS6-era through later OBD2B applications.

Splendor iSmart & Splendor NXG

Hero's own product description also names Splendor iSmart and Splendor NXG as compatible applications. These models are therefore included intentionally in the listing rather than being added as generic keyword matches.

What Does an Engine Guard Do?

The engine guard sits around the lower / front engine and frame area and acts as a first-contact protective structure in certain low-speed falls, parking drops and minor side impacts. It may help keep parts of the engine area and the rider's leg farther from direct ground contact.

Important: an engine guard does not make the motorcycle crash-proof and cannot guarantee protection of the rider, engine, frame or bodywork in every accident. The amount of protection depends on impact direction, speed, road surface and severity.

Why Buyers Also Call It a Leg Guard or Crash Guard

In the Indian motorcycle market, “engine guard”, “leg guard” and “crash guard” are often used for similar tubular protection components. Hero's official name for K50508ACKH700S is KIT, GUARD ENGINE. “Leg guard” and “crash guard” are included here as buyer search terms, not as a different product classification.

Hero-Claimed Product Features

• Engine and rider-area protection: designed to provide additional protection around the engine / lower front area
• 4 mm pipe thickness: Hero specifically highlights 4 mm pipe thickness
• High-strength construction: intended for protection while maintaining practical weight
• Model-specific styling: designed to complement the motorcycle rather than look like a generic universal guard
• Genuine Hero fitment: intended for specified Hero applications

Genuine Model-Specific Guard vs Universal Crash Guard

A universal aftermarket guard may require improvised clamps, spacers, drilling or modification. This Hero genuine guard is intended around the mounting arrangement of its approved motorcycle applications.

Advantages of using the correct model-specific genuine guard include:

• Correct intended mounting geometry
• Better alignment with the motorcycle's frame / engine area
• Factory-style appearance
• Reduced need for fabrication or adaptation
• Exact Hero part-number traceability

Engine Guard vs Engine Bash Plate / Sump Guard

This part is an engine / leg guard, not an under-engine bash plate. A bash plate or sump guard primarily shields the underside of an engine from stones or direct underbody impacts. A tubular engine guard is positioned differently and is intended mainly as an external protective structure around the engine / rider-leg area.

Common Reasons to Replace an Existing Guard

• Original guard is bent after a fall
• Mounting point has been distorted
• Guard is heavily scratched, dented or corroded
• Existing aftermarket guard does not align correctly
• Bike is being restored after accident repair
• Owner wants genuine Hero fitment instead of a universal guard
• Motorcycle was supplied without the desired guard

When a Bent Guard Should Not Simply Be Reused

If an engine guard has taken a significant impact, inspect it and the motorcycle mounting points before reuse. A visibly bent guard can sit too close to the engine, exhaust, controls or rider's leg and may also indicate that its mounting brackets or the frame-side mounting area need inspection.

What You Will Receive

• 1 × Hero Genuine Engine Guard Kit
• Part number: K50508ACKH700S

Hardware / Kit Contents Important Note

Hero's current online product record identifies this as a kit but publishes Kit BOM: NA. Therefore, this listing does not promise a specific number of bolts, spacers, clamps or washers unless those items are physically present in the Hero package supplied.

If replacing a missing or damaged guard, inspect whether the motorcycle still has the correct original mounting hardware before installation.

Installation Notes

• Confirm the motorcycle is a verified application before opening / installing the part
• Inspect mounting points for bending or accident damage
• Do not force the guard into misaligned mounting holes
• Check clearance from engine cases, exhaust and moving controls
• Use correct fasteners and tightening torque for the motorcycle
• After fitting, turn the handlebar fully left and right and check for interference
• Confirm the rider's feet and controls have normal clearance
• Re-check fasteners after initial use if required by workshop procedure

Fitment Warning

Do not buy only because your motorcycle looks similar to an HF Deluxe or Splendor. Hero has produced many commuter models on related platforms, and guard mounting points can differ. For the safest fitment, match K50508ACKH700S to the original accessory / Hero compatibility record for your exact model.

Buyer Fitment Checklist

• Part required: Engine Guard / Leg Guard
• Hero Part Number: K50508ACKH700S
• Primary Models: HF 100, HF Deluxe, Splendor iSmart, Splendor NXG
• Primary HF Years: 2021–2025 as stated by Hero
• Mounting points: Must be original and undamaged
• Use: Model-specific protective engine / leg guard

FAQs

1. What is K50508ACKH700S?
It is Hero MotoCorp's genuine KIT, GUARD ENGINE, commonly searched for as an engine guard, leg guard or crash guard.

2. Does it fit Hero HF 100?
Yes. Hero specifically lists HF 100 (2021–2025) for this engine guard, and current compatibility records include later HF 100 generations as well.

3. Does it fit Hero HF Deluxe?
Yes. Hero specifically markets it for HF Deluxe (2021–2025), while compatibility data also shows multiple HF Deluxe iBS, BS6, OBD-II and OBD2B catalogue generations.

4. Does it fit Splendor iSmart?
Yes. Hero's own product description lists Splendor iSmart as an application.

5. Does it fit Splendor NXG?
Yes. Hero's product description also lists Splendor NXG.

6. Does it fit Splendor Plus?
Do not assume so from the “Splendor” name alone. Hero specifically names Splendor iSmart and NXG for this SKU. Splendor Plus should be verified separately by exact accessory / EPC fitment before ordering.

7. Is this called a leg guard?
Many buyers call this type of part a leg guard or crash guard. Hero's official description is KIT, GUARD ENGINE.

8. Is it a sump guard or bash plate?
No. This is a tubular-style engine / leg protection guard, not an under-engine bash plate.

9. How thick is the guard?
Hero specifically advertises 4 mm pipe thickness for this product.

10. Does it guarantee that the engine will not be damaged in a crash?
No. It can provide additional protection in certain impacts, but no engine / crash guard can guarantee damage prevention in every accident.

11. Are all fitting bolts included?
Not guaranteed from the published data. Hero lists the item as a kit but currently shows Kit BOM: NA. Included hardware should be based on what is physically present in the sealed package.

12. Is this an aftermarket guard?
No. This listing is for the genuine Hero MotoCorp accessory / part identified by exact SKU K50508ACKH700S.

Search Keywords

Hero HF 100 engine guard, HF 100 leg guard, HF 100 crash guard, Hero HF Deluxe engine guard, HF Deluxe leg guard, HF Deluxe crash guard, Splendor iSmart engine guard, Splendor iSmart leg guard, Splendor NXG engine guard, Splendor NXG leg guard, Hero genuine crash guard, Hero engine protector, Hero leg protector, KIT GUARD ENGINE, K50508ACKH700S.