Hero Genuine Windscreen / Front Visor for Glamour Xtec & Glamour Techno OBD2 | 6414AACLD00S

Hero Genuine Windscreen / Front Visor – Glamour Xtec & Glamour Techno OBD2 – 6414AACLD00S

Genuine Hero front windscreen / visor sub-assembly for specific Hero Glamour 125 generations. The service part number is 6414AACLD00S, corresponding to catalogue base number 6414A-ACL-D00 and the official Hero description SCREEN WIND SUB ASSY.

This is the small model-specific screen fitted in the headlamp / front-cowl area. Buyers may also search for it as a Hero Glamour Xtec visor, Glamour Techno windscreen, Glamour front visor, headlight visor, flyscreen, front cowl screen, or simply by the exact part number 6414AACLD00S.

Important: this part is common, but it is not a universal fit for every BS6 Glamour or every Glamour Xtec generation. Hero uses more than one windscreen / screen-wind part number across visually similar Glamour variants. Match the exact model generation and part number before ordering.

Product Identity

• Brand: Hero MotoCorp
• Hero Service Part Number: 6414AACLD00S
• Catalogue Base Number: 6414A-ACL-D00
• Official Description: SCREEN WIND SUB ASSY
• Common Buyer Names: Windscreen / Front Visor / Headlight Visor / Flyscreen / Front Cowl Screen
• Location: Front headlamp / meter-cowl area
• Quantity: 1 piece

Verified Fitment

Very Important Glamour Generation Difference

Do not assume that the words Glamour BS6 or Glamour Xtec automatically make this the correct screen.

A separate Hero windscreen part, 6414AAANB00S, is listed for several other Glamour generations, including:

• Glamour FI-BSVI – March 2020
• Glamour FI-iBS BSVI – January 2021
• Glamour i3S BSVI – October 2021
• Glamour 125 BS-VI Refresh – May 2022
• Glamour Xtec 125 – September 2022
• Glamour Canvas – October 2022

Therefore: if your bike is a 2022 Glamour Xtec 125 / Glamour Canvas / BS-VI Refresh or another generation listed above, do not buy 6414AACLD00S only because the visor looks similar. Verify the original part number or Hero EPC first.

What This Part Is

The SCREEN WIND SUB ASSY is the compact screen / visor used as part of the motorcycle's front headlight and cowl assembly. It completes the factory front-end appearance around the headlamp and instrument area and uses model-specific mounting geometry.

This is not a large touring windshield. On these commuter models it is more accurately understood as the front cowl windscreen / headlight visor / flyscreen.

Why Buyers Replace It

• Original front visor is cracked or broken
• Screen is badly scratched or marked after a fall
• Mounting tabs or holes have been damaged
• Front cowl has been repaired after an accident
• Original visor is missing
• Bike is being restored to factory appearance
• An aftermarket visor does not align properly with the original cowl

Why Exact Part Number Matters

• Different Glamour generations use visually similar front bodywork
• Hero lists more than one SCREEN WIND SUB ASSY for the Glamour family
• Mounting-hole position and cowl geometry can differ
• Buying only by model name can result in the wrong visor
• Exact OEM-number matching is the safest way to prevent wrong orders

Known Related / Similar Hero Windscreen Numbers

• 6414AACLD00S / 6414A-ACL-D00 – Screen Wind Sub Assy – this product
• 6414AAANB00S – Screen Wind Sub Assy – used on several other Glamour BS6 / Xtec / Canvas generations
• 64140AANB00S – Screen Wind – separate Hero part
• 64140AAN410S – Visor Front – separate Hero part

These similar numbers should not be treated as interchangeable without an exact EPC or supersession match.

What You Will Receive

• 1 x Hero Genuine Screen Wind / Front Visor Sub Assembly
• Hero service part number: 6414AACLD00S

Not Included Unless Specifically Supplied

• Headlight assembly
• Complete front cowl / headlight mask
• Right or left coloured cowl panels
• Meter mounting stay
• Inner front panel
• Screws, rubber grommets, clips or washers
• Windscreen emblem / sticker

Windscreen Emblem / Sticker Note

Hero catalogues can list the windscreen emblem / mark separately from the windscreen sub-assembly. Do not assume a sticker or emblem is included unless it is physically present in the supplied Hero pack.

Installation & Fitment Notes

• Match the old part number before installation whenever possible
• Inspect surrounding front-cowl tabs and brackets for accident damage
• Do not force the visor onto bent or mismatched body panels
• Reuse only serviceable clips, rubbers and hardware
• Tighten plastic-body fasteners evenly; over-tightening can crack mounting points
• Check that the visor sits symmetrically around the headlamp / meter area
• If the front cowl has been replaced, confirm all adjoining panels are the correct generation

Buyer Fitment Checklist

• Part required: Screen Wind Sub Assembly / Front Visor
• Hero service part number: 6414AACLD00S
• Base part number: 6414A-ACL-D00
• Primary verified models: Glamour Xtec July 2021; Glamour BSVI Techno OBD II January 2023
• Additional catalogue-confirmed application: Ignitor 125 MidLife Refresh Disc CBS October 2022

Return Prevention Note

Please verify the exact part number before ordering. Hero uses a different screen-wind part number on several other Glamour BS6 / Glamour Xtec / Glamour Canvas generations. Do not order solely by bike name, colour, or visual similarity.

FAQs

1. What is 6414AACLD00S?
It is a Hero Genuine SCREEN WIND SUB ASSY, commonly called the front windscreen, headlight visor, flyscreen or front-cowl screen.

2. Which Glamour models are confirmed for this exact part number?
The strongest exact-SKU fitment records confirm Glamour Xtec (July 2021) and Glamour BSVI Techno OBD II (January 2023).

3. Does this fit every Hero Glamour Xtec?
No. Hero uses different visor part numbers across Glamour generations. For example, Glamour Xtec 125 (September 2022) is listed with 6414AAANB00S, not this SKU.

4. Does this fit Glamour Canvas?
Do not use this part for Glamour Canvas unless the bike's original number specifically matches. Current fitment data lists 6414AAANB00S for Glamour Canvas (October 2022).

5. Does this fit the 2020 Glamour FI-BSVI?
Not according to the strongest exact-part fitment record. Glamour FI-BSVI (March 2020) is associated with the separate 6414AAANB00S screen-wind assembly.

6. Does this also fit Hero Ignitor?
Yes, the Hero Ignitor MidLife Refresh parts catalogue lists base part 6414A-ACL-D00 in the Disc CBS front-cowl group for the October 2022 application. Because market naming and regional model availability can differ, confirm the original number before dispatch.

7. Is this the complete headlight visor / mask assembly?
No. It is the screen / visor sub-assembly. The headlight, coloured cowl panels, inner panel and mounting hardware are separate unless specifically included.

8. Is the emblem included?
Do not assume so. Windscreen emblems can be separate Hero catalogue items.

9. Is this an aftermarket universal visor?
No. This listing is for the genuine Hero model-specific screen identified by the exact part number.

10. Why are there two numbers: 6414A-ACL-D00 and 6414AACLD00S?
6414A-ACL-D00 is the catalogue-style base number, while 6414AACLD00S is the service / retail-form part number commonly used in Hero spare-parts sales records.

SEO / Buyer Search Terms

Hero Glamour Xtec windscreen, Hero Glamour Xtec front visor, Glamour Xtec headlight visor, Glamour Techno OBD2 windscreen, Glamour Techno front visor, Hero Glamour flyscreen, Hero front cowl screen, SCREEN WIND SUB ASSY, 6414AACLD00S, 6414A-ACL-D00, 6414A ACL D00.