Hero Maestro Edge 110 – Head Light Assembly (W/O Bulb) – Genuine OEM – 3310BAAW00099S

Restore factory night visibility on your Hero Maestro Edge 110 with this genuine Head Light Assembly (without bulb), OEM part 3310BAAW00099S. This is the complete sealed reflector + lens + housing that directly replaces a cracked, yellowed, or fogged unit to bring back a sharp beam and correct cutoff. Because it’s an original Hero Genuine Part, mounting points and tolerances match perfectly—no trimming or drilling—so your cowl lines remain tight and rattle-free. Reuse your existing bulb and rubber boot, or install a fresh OE-spec bulb for best results.

Compared with aftermarket replicas, the OE reflector geometry gives more controlled spread, better hot-spot focus, and reduced glare for oncoming traffic. It’s also built with higher-grade optics and UV-stable polycarbonate to resist hazing. Ideal if your scooter has suffered a minor impact, water ingress, or dull output from an aged lamp. Recommended to be fitted by a competent mechanic; DIY is possible with basic tools and careful panel removal.

Note: This listing is confirmed for Maestro Edge 110. Some sellers loosely claim compatibility with Maestro Edge 125—that is not confirmed for this specific part number and is marked ❓ below. Please cross-check by VIN/year or message us and we’ll verify before dispatch. Sources: Hero parts list & dealer listings naming 3310BAAW00099S as “Light Assy Head (W/O Bulb)” for Maestro Edge / Hero models. 

Key Features

• 100% Genuine Hero Part (OE spec) – 3310BAAW00099S. 

• Complete housing + reflector + lens (bulb not included). 

• Direct-fit to Maestro Edge 110 OE mounts—no modification required. 

• Restores factory beam pattern & cutoff for safer night riding.

• UV-resistant lens and tight seals help resist yellowing and fogging.

• Maintains scooter’s original look & panel alignment.

• Designed for OE halogen bulb spec; avoids glare common with poor LED swaps.

• Backed by Under The Hood packaging, QC photos, and support.

Compatibility Table

❓ Warning: If your scooter is Maestro Edge 125, do not order this PN without VIN confirmation—shell shape/mounts differ.

Variants

• This SKU is without bulb. Order an OE-spec bulb separately if required.

FAQs

1) Will this fit Maestro Edge 125?
No—this PN is confirmed for Maestro Edge 110. The 125 uses a different assembly; please share VIN/year for us to confirm the correct part. ❓

2) What’s included?
Complete headlight housing with lens & reflector. Bulb not included—reuse your bulb/boot or purchase OE-spec. 

3) Is it plug-and-play?
Yes. It reuses factory screws and brackets; no cutting or drilling. Time ~30–45 minutes with basic tools.

4) Can I use an LED bulb?
Only if it matches OE wattage and beam focus. Many generic LEDs scatter light and cause glare; we recommend OE halogen for correct cutoff.

5) My old lamp fogs—will this stop it?
A new sealed housing prevents fogging caused by cracks/warped seals. Ensure the rubber boot and vent ports are seated correctly during refit.

6) How do I aim the beam after installation?
Park 3–5 m from a wall and adjust the headlamp aiming screw until the cutoff matches the service-manual height.

7) Warranty / returns?
Electrical/lighting parts are returnable only if unused in original box. Report transit damage within 24–48 hrs with unboxing photos/video.