Hero Genuine Oxygen Sensor for HF 100, HF Deluxe, Passion Plus / HZ, Splendor Plus & Xtreme 125R | 36532ACK001S

Hero Genuine Oxygen Sensor – 36532ACK001S

This listing is for the Hero Genuine Oxygen Sensor identified by exact part number 36532ACK001S. Select this component by complete part number and chassis/VIN-based EPC confirmation—not by visual similarity, shared engine capacity or a broad model-family name.

• HF 100 (Jan, 2023)
• HF 100 (Dec, 2021)
• HF 100 OBD1 (HMCM FI KIT) (Nov, 2022)
• HF-100 OBD II (March, 2023)
• HF 100_BF THB (Sept., 2024)
• HF Deluxe i3S BSVI (Jan, 2020)
• HF Deluxe BSVI (Jan, 2020)
• HF Deluxe (Jan, 2023)
• HF Deluxe (MAR, 2021)
• HF Deluxe (Dec, 2022)
• HF Deluxe i3S BSVI (Mar, 2022)
• HF Deluxe BSVI (May, 2022)
• HF-Deluxe (March, 2023)
• HF Deluxe (Nov, 2022)
• HF-Deluxe OBD II (March, 2023)
• HF DLX -BF THB (Sept., 2024)
• HF DELUXE BLACK_BF THB (Sept., 2024)
• HF DELUXE OBD II (JAN, 2023)
• Passion-HZ (May, 2023)
• PASSION HZ FI (Apr. 2024)
• SPLENDOR PLUS OBD IIB (Apr., 2025)
• SPLENDOR PLUS OBD2B (Apr., 2025)
• SPLENDOR PLUS (June, 2024)
• XTREME 125 (Feb., 2024)

The official Hero EPC contains 25 application rows for this part; the repeated Splendor Plus June 2024 entry has been collapsed.

Confirmed Compatibility

Fitment Note / Return Prevention Note

• Match every letter, number and suffix in the SKU.
• Confirm the exact motorcycle or scooter model, variant, production generation and applicable EPC assembly.
• Compare the old part's side, connector, mounting points, dimensions and surrounding components before opening the package.
• Do not install, energise, fill, lubricate, machine or modify the component merely to test compatibility.
• Installed, electrically tested, fuel-exposed, oil-exposed, marked, scratched or modified parts cannot be treated as unused returns.

What This Product Is

• Hero Genuine exhaust oxygen sensor
• Official description: Oxygen Sensor
• Hero part number: 36532ACK001S
• Catalogue-format part number: 36532-ACK-001
• Common buyer names: O2 sensor, oxygen sensor, lambda sensor, exhaust sensor and air-fuel feedback sensor
• System: electronic fuel injection and emission-control feedback
• Primary function: monitors oxygen content in the exhaust stream
• Signal destination: engine control unit / ECU
• Supply form: one manufacturer-packed sensor assembly

Key Features

• Genuine Hero electronic emission-control component
• Designed for the specified Hero ECU, exhaust and wiring application
• Provides exhaust-oxygen feedback for fuel-mixture correction
• Supports stable closed-loop fuel control when the sensor and related systems are serviceable
• Model-specific sensor body, thread, cable length and electrical connector
• Suitable replacement when the matching original sensor is diagnostically confirmed faulty or physically damaged
• Built to withstand normal exhaust heat, vibration and road-use conditions
• Better fitment confidence than selecting a universal oxygen sensor by appearance
• One oxygen sensor supplied
• Current Hero MRP reference: ₹1,140 inclusive of taxes

What You Will Receive

• 1 × Hero Genuine Oxygen Sensor
• Part number: 36532ACK001S
• One manufacturer-packed O2/lambda sensor assembly

Not included unless physically present inside the sealed Hero pack:

• Sensor mounting washer or gasket
• Anti-seize compound
• Connector repair terminals
• Wiring harness
• Exhaust pipe or silencer
• Catalytic converter
• Fuel injector
• Throttle body
• ECU
• Diagnostic scanning or fault-code clearing
• Installation labour

Technical Details

Installation Note

Before Installation

• Read the diagnostic trouble code and freeze-frame data where supported
• Inspect live oxygen-sensor data according to the service procedure
• Check battery and charging-system voltage
• Inspect the sensor connector and wiring
• Check for exhaust leakage near the sensor
• Compare the old and new part numbers
• Compare the connector, wire count, cable length and probe profile
• Inspect the threaded mounting boss for damage
• Identify the root cause of contamination before fitting the new sensor

During Installation

• Disconnect the battery according to the vehicle service procedure
• Do not pull or twist the sensor by its cable
• Use the correct oxygen-sensor socket or tool
• Do not strike or touch the sensing tip
• Keep grease, oil and cleaning chemicals away from the probe
• Apply anti-seize only if specified and only to the threads
• Do not contaminate the sensing slots or sensor tip
• Start the sensor thread by hand to prevent cross-threading
• Tighten the sensor to the exact service torque
• Route the cable through the original heat-protected path
• Keep the cable away from the exhaust, sharp edges and moving parts
• Lock the electrical connector fully

After Installation

• Reconnect the battery and electrical system
• Clear related fault codes where required
• Start the engine and check for exhaust leakage
• Inspect live sensor operation after the engine reaches the required temperature
• Confirm stable idle and throttle response
• Verify that the engine warning lamp remains off
• Reinspect the wiring route and connector security

Do not operate the motorcycle if the sensor cable contacts the exhaust, the connector is loose, an exhaust leak remains or the original diagnostic fault returns without further investigation.

Buyer-Focused FAQs

How should fitment be confirmed?
Match the complete part number with the motorcycle's chassis/VIN-based Hero EPC. A shared model name, appearance or engine capacity is not enough.

Can the part be installed only to check compatibility?
No. Confirm the EPC, physical design and related assembly before opening or installation.

What will be supplied?
One Hero Genuine component under part number 36532ACK001S, subject to the exact contents of the sealed manufacturer package.