Hero Genuine Rear Disc Brake Pad Kit for Xpulse 200/210, Xtreme 160R/4V, Xtreme 200R/200S & Hunk Disc Models | Pad Set RR | 06435AABA00S

Hero Genuine Rear Disc Brake Pad Kit – 06435AABA00S

Restore dependable rear-disc braking with the Hero Genuine Kit, Pad RR, part number 06435AABA00S. This model-specific rear brake-pad set is used on compatible Hero Xpulse, Xtreme and Hunk motorcycles equipped with the corresponding rear hydraulic disc-brake caliper.

The rear brake pads create friction against the brake disc when hydraulic pressure moves the caliper piston. Worn, glazed, contaminated, cracked or unevenly worn pads can reduce braking response, increase stopping distance, cause scraping or squealing, produce vibration, or damage the rear brake disc if the friction material is completely exhausted.

This listing is for one manufacturer-packed rear brake-pad kit. Hero lists the retail quantity as one kit but does not publish a detailed kit bill of materials for this SKU. The listing therefore does not invent or guarantee a physical pad count beyond the sealed rear pad set supplied under part number 06435AABA00S.

What This Product Is

• Hero Genuine rear disc-brake pad kit
• Official description: Kit, Pad RR
• Hero part number: 06435AABA00S
• Catalogue-format part number: 06435-AAB-A00
• Common buyer names: rear brake pad set, rear disc pad, rear brake shoe for disc brake and rear caliper pad
• Position: rear wheel
• Brake type: hydraulic rear disc brake
• Supply form: one manufacturer-packed rear pad kit

Key Features

• Genuine Hero replacement pad kit for the specified rear brake caliper
• Designed to deliver dependable rear braking when correctly installed
• Fade-resistant performance described for repeated city and highway braking
• Low-dust formulation intended to help reduce brake residue on the rear wheel
• Model-specific pad profile and caliper fit when matched by exact part number
• Suitable replacement for worn, glazed, cracked or contaminated matching pads
• Supports correct pad alignment and disc contact in the compatible caliper
• Better fitment confidence than selecting a universal pad by appearance or dimensions
• One sealed rear brake-pad kit supplied
• Current Hero MRP reference: ₹1,460 inclusive of taxes

Confirmed Compatibility

Exact Model and Generation References

• Hero Xtreme 200R (2018-generation rear-disc application)
• Hero Xpulse 200 (May, 2019)
• Hero Xpulse 200 FI (May, 2019)
• Hero Xpulse 200T (May, 2019)
• Hero Xtreme 200S (May, 2019)
• Hero Xpulse 200T FI (Jan, 2020)
• Hero Xtreme FI 160R BSVI (Mar, 2020)
• Hero Hunk 160R FI BSVI (Apr, 2020) — export-market application
• Hero Xpulse 200 2V BSVI (Jun, 2020)
• Hero Xtreme 200S BSVI (Oct, 2020)
• Hero Xtreme FI 160R BSVI (Jan, 2021)
• Hero Xpulse 200T FI BSVI (Feb, 2021)
• Hero Xpulse 200 4V (Oct, 2021)
• Hero Hunk Stealth 160R FI BSVI (Oct, 2021) — export-market application
• Hero Xpulse 200T FI (Mar, 2022)
• Hero Xpulse 200 ABS (Mar, 2022)
• Hero Xpulse 200 4V (Jul, 2022)
• Hero Xtreme Stealth 160R (Sep, 2022)
• Hero Xpulse 200T 4V FI (Jan, 2023)
• Hero Xpulse 200 OBD-II 4V (Apr, 2023)
• Hero Xpulse 200T OBD-II (Jun, 2023)
• Hero Xtreme 160 4V (Jul, 2023)
• Hero Xtreme 200S FF BSVI OBD-II (Jul, 2023)
• Hero Xtreme 160 4V Premium (Aug, 2023)
• Hero Xpulse 200 4V EU5 (Sep, 2023) — export-market application
• Hero Xpulse 200 4V EU4 (Nov, 2023) — export-market application
• Hero Hunk 150R Euro III (Jul, 2024) — export-market application
• Hero Xpulse 200 4V (Nov, 2024)
• Hero Xpulse 200 4V Dakar Edition (Jan, 2025)
• Hero Xpulse 210LC OBD-II Phase 2 (Mar, 2025)

Official Hero Model-Family Applicability

• Hero Hunk family — only rear-disc variants catalogued with 06435AABA00S
• Hero Xpulse 200 and Xpulse 200 FI
• Hero Xpulse 200 4V
• Hero Xpulse 200T and Xpulse 200T 4V
• Hero Xpulse 210 — March 2025 catalogue application
• Hero Xtreme 160R and selected Xtreme 160R 4V variants
• Hero Xtreme 160R+ — only variants using this exact pad SKU
• Hero Xtreme 200R
• Hero Xtreme 200S and selected Xtreme 200S 4V variants

Compatibility boundary: The same model family can use different rear calipers and brake pads across production years, ABS revisions and market specifications. Some newer Xtreme 125 and Xtreme 160 configurations use a different rear pad, including 06435-ACA-000. Do not order 06435AABA00S merely because the pad looks similar.

Fitment Note / Return Prevention Note

Before ordering, match the complete Hero part number 06435AABA00S or catalogue number 06435-AAB-A00 with the motorcycle’s chassis/VIN-based rear brake catalogue and existing brake pads.

Confirm all of the following:

• Exact motorcycle model, variant and production generation
• Rear disc-brake configuration
• Rear caliper part number and design
• Existing brake-pad outline, width, height and retaining features
• Pad pin, spring plate and stopper arrangement
• ABS or non-ABS rear brake configuration where relevant
• Part number shown in the rear-caliper assembly diagram
• Part number printed on the existing pack, invoice or service record

Do not confuse this product with:

• Front brake-pad kits
• Rear drum-brake shoes
• 06435-ACA-000 rear pad used on certain newer Hero rear-caliper configurations
• Caliper piston seal kit
• Rear caliper sub-assembly
• Caliper bracket or carrier
• Rear brake disc
• Rear master cylinder or brake hose

A weak, noisy, dragging or pulsating rear brake can also be caused by a worn or warped disc, seized caliper piston, sticking slider pins, contaminated brake fluid, air in the hydraulic system, damaged hose, master-cylinder fault, incorrect ABS operation, misalignment or improper installation. Replace the pad kit only after the entire rear brake system has been inspected.

Brake-component return protection: Confirm the exact SKU before installation. Brake pads showing caliper marks, disc contact, grease, brake-fluid contamination, sanding, filing, modification or use cannot be treated as unused returns.

What You Will Receive

• 1 × Hero Genuine Kit, Pad RR
• Part number: 06435AABA00S
• One manufacturer-packed rear disc-brake pad set

Hero does not publish the retail kit BOM for this SKU. The listing therefore promises the sealed pad kit under 06435AABA00S, not separately assumed loose hardware.

Not included unless physically supplied inside the sealed Hero pack:

• Rear brake caliper
• Caliper carrier or bracket
• Caliper piston or seal set
• Pad pins, stopper ring, clips or spring plates
• Rear brake disc / rotor
• Rear brake hose
• Rear master cylinder
• ABS wheel-speed sensor or sensor ring
• Brake fluid
• Mounting bolts
• Installation labour

Technical Details

Installation Note

Brake-pad replacement is safety-critical and should be performed by a trained motorcycle technician.

Before fitting:

• Confirm the old and new pad part numbers
• Measure rear brake-disc thickness and inspect for scoring, cracks and runout
• Inspect the caliper piston, seals, slider pins and carrier
• Check the pad pin, retaining clips and spring plate
• Inspect the brake hose and banjo connections for leakage
• Check the brake-fluid level and condition
• Clean the caliper using a brake-safe procedure

During installation:

• Keep grease, oil, fuel and brake fluid away from the friction surfaces
• Do not sand, grind, drill or reshape the pads to force fitment
• Install the complete matched pad set rather than mixing a new pad with an old pad
• Use the original retaining arrangement and model-specific hardware
• Retract the caliper piston correctly without damaging the seals
• Tighten all brake fasteners to the motorcycle’s prescribed torque
• Bleed the hydraulic circuit if it has been opened or air is present

After installation, operate the rear brake pedal repeatedly until firm pressure is restored. Confirm free wheel rotation after brake release, no fluid leakage and correct pad alignment. Follow an appropriate brake-pad bedding procedure with controlled stops and avoid aggressive braking until the pads have established proper contact with the disc.

Buyer-Focused FAQs

1. What is Hero part number 06435AABA00S?
It is a Hero Genuine rear disc-brake pad kit for compatible Xpulse, Xtreme and Hunk rear-caliper assemblies.

2. Is this for the front or rear brake?
This is a rear brake-pad kit. The official “RR” description refers to the rear position.

3. Is this a brake pad or drum-brake shoe?
It is for a hydraulic rear disc brake. It is not a curved rear drum-brake shoe set.

4. How many physical pads are inside the pack?
Hero lists one retail kit but publishes no kit bill of materials for this SKU. The product is therefore sold as one sealed manufacturer rear pad set without an invented loose-piece count.

5. Does it fit Hero Xpulse 200?
Yes. Confirmed applications include Xpulse 200 and Xpulse 200 FI May 2019, Xpulse 200 2V BSVI June 2020, and later compatible ABS and OBD variants listed above.

6. Does it fit Hero Xpulse 200 4V?
Yes. Confirmed references include October 2021, July 2022, OBD-II April 2023, November 2024 and Dakar Edition January 2025.

7. Does it fit Hero Xpulse 200T?
Yes. Confirmed references include May 2019, FI January 2020, FI BSVI February 2021, FI March 2022, 4V FI January 2023 and OBD-II June 2023.

8. Does it fit Hero Xpulse 210?
Yes. The Xpulse 210LC OBD-II Phase 2 March 2025 rear-caliper catalogue lists 06435-AAB-A00 as the rear pad set.

9. Does it fit Hero Xtreme 160R?
Yes. Confirmed references include Xtreme FI 160R BSVI March 2020 and January 2021, plus Xtreme Stealth 160R September 2022.

10. Does it fit Xtreme 160R 4V?
Confirmed applications include Xtreme 160 4V July 2023 and Xtreme 160 4V Premium August 2023. Do not assume every later 4V configuration uses this pad because some use a different SKU.

11. Does it fit Xtreme 200R?
Yes. Xtreme 200R is an official applicable family and the 2018-generation rear-disc application uses this pad set.

12. Does it fit Xtreme 200S?
Yes. Confirmed applications include Xtreme 200S May 2019, BSVI October 2020 and FF BSVI OBD-II July 2023.

13. Does it fit Hero Hunk?
Hero lists Hunk among the applicable families. Confirmed export references include Hunk 160R FI BSVI April 2020, Hunk Stealth 160R October 2021 and Hunk 150R Euro III July 2024.

14. Does it fit Xtreme 125R?
Do not assume fitment. Several Xtreme 125 and newer Xtreme rear-caliper configurations use 06435-ACA-000 instead.

15. Are the caliper pins and clips included?
Hero does not publish the kit BOM. Do not assume separate pins, clips, spring plates or caliper hardware are included unless visible inside the sealed pack.

16. Is the rear caliper included?
No. This listing is for the brake-pad kit only. The caliper and bracket are separate parts.

17. When should the rear brake pads be replaced?
Replace them when friction material reaches the service limit, wear becomes uneven, the pads are cracked, contaminated or glazed, or a technician identifies another condition requiring replacement.

18. Can worn pads damage the brake disc?
Yes. Continued use after the friction material is exhausted can allow the backing plate to contact and damage the disc.

19. Why is my rear brake making noise?
Noise can result from worn or contaminated pads, disc scoring, glazing, loose hardware, caliper problems, misalignment or debris. The complete system should be inspected.

20. Will new pads fix a soft brake pedal?
Not necessarily. Air in the hydraulic circuit, old fluid, hose expansion, leakage, master-cylinder wear or caliper problems can cause a soft pedal.

21. Do new brake pads require bedding-in?
Yes. Controlled bedding helps establish even contact between the new friction surfaces and the existing disc.

22. Is professional installation recommended?
Yes. Incorrect brake installation can cause dragging, leakage, poor braking or complete loss of rear braking force.

23. How can I prevent ordering the wrong rear pad?
Match the complete SKU, exact motorcycle generation, rear caliper, pad shape, retaining arrangement and chassis/VIN-based Hero catalogue.

Brake Safety and Purchase Warning

Confirm the exact part number before fitting the pads. Do not install them merely for trial. Caliper marks, disc contact, contamination, sanding, filing, alteration or road use can permanently affect the friction material and invalidate return eligibility.