Hero Xtreme 125 XTEC2 Front Right LED Indicator Winker Assembly | ADJSA8C000000GS

Hero Xtreme 125 XTEC2 Front Right LED Indicator / Winker Assembly – ADJSA8C000000GS

Replace a cracked, broken, water-damaged or non-working front indicator with the Hero Genuine front-right winker assembly ADJSA8C000000GS.

This is the complete indicator assembly fitted on the motorcycle’s front right-hand side. Hero uses the term “winker” for the turn-signal indicator. The confirmed application is the latest Hero Xtreme 125 XTEC2 catalogue generation.

The Xtreme 125R platform uses an all-LED lighting setup, including LED winkers. This model-specific electrical assembly should be ordered only after confirming the exact part number, fitting side and connector.

What This Product Is

• Hero Genuine front turn-signal indicator assembly
• Official catalogue description: WINKER FRONT RH ASSY
• Retail part number: ADJSA8C000000GS
• Catalogue reference: ADJSA8C000000G
• Fitting position: front right-hand side
• Lighting type: LED indicator assembly
• Quantity supplied: one assembly

Key Features

• Genuine Hero MotoCorp replacement component
• Designed for the specified Xtreme 125 XTEC2 front-right position
• Restores the original turn-signal appearance and operation
• Suitable for replacing a broken lens, damaged housing or failed LED assembly
• Model-specific mounting and electrical connection
• Correct replacement where part number ADJSA8C000000GS is specified
• Useful for accident repair and genuine body restoration

Confirmed Compatibility

• Hero Xtreme 125 XTEC2 – October 2025 catalogue

The vehicle may also be referred to in retail discussions as the latest Xtreme 125R or Xtreme 125R XTEC2 generation. Compatibility must still be confirmed using the exact part number.

Side and Position Confirmation

Fitment Note / Return Prevention Note

This product is for the front right-hand side only. Right and left are identified from the rider’s seated position facing forward.

Before ordering, confirm:

• Exact part number ADJSA8C000000GS
• Hero Xtreme 125 XTEC2 model generation
• Front position
• Right-hand side
• Electrical connector shape
• Mounting-stem and nut arrangement
• Wire length and routing

Do not order only by appearance. Hero indicators can look similar while differing in connector, mounting stem, wire length, LED circuitry and lens orientation.

Compatibility is not automatically claimed for earlier Xtreme 125R variants, Xtreme 160R, Xtreme 160R 4V or other Hero motorcycles.

What You Will Receive

• 1 x Hero Genuine front-right LED indicator/winker assembly
• Part number: ADJSA8C000000GS

The following are not included unless supplied inside Hero’s sealed factory packaging:

• Front-left indicator
• Rear indicators
• Wiring harness
• Flasher relay
• Headlamp assembly
• Indicator mounting bracket
• Additional nuts, washers or fasteners

Technical Details

Installation Note

Installation should be performed by a competent motorcycle technician. Switch off the ignition before disconnecting or connecting the indicator.

After installation, confirm:

• The front-right indicator flashes correctly
• The indicator warning lamp functions correctly
• The connector is fully seated and protected from moisture
• The wire is routed away from steering, sharp edges and hot components
• The indicator is securely mounted and correctly aligned
• The left and right flashing rate is normal

If the new indicator does not operate, diagnose the fuse, wiring, connector, switch and flasher-control circuit before assuming the indicator is defective.

Electrical Spare-Part Policy

Electrical parts are non-returnable once the sealed packaging is opened or the component is connected, installed, tested or used.

Confirm the exact part number, model generation, side, connector and mounting arrangement before ordering. Record a clear continuous unboxing video before opening the package. Any claim for an incorrect or damaged item must be reported within 24 hours of delivery with the unboxing video and clear photographs.

Buyer-Focused FAQs

Q1. What is Hero part number ADJSA8C000000GS?
It is the Hero Genuine front-right turn-signal or winker assembly for the confirmed Xtreme 125 XTEC2 catalogue application.

Q2. Which side does this indicator fit?
It fits the front right-hand side when viewed from the rider’s seated position.

Q3. Is this the front-left indicator?
No. The front-left indicator uses a different code: ADJSA8C001000GS.

Q4. Is this a rear indicator?
No. It is for the front-right position. The rear-right and rear-left indicators use separate part numbers.

Q5. Is it an LED indicator?
Yes. The Xtreme 125R/XTEC2 platform uses an all-LED lighting setup, including the winkers.

Q6. Is a bulb included?
This is an integrated LED indicator assembly rather than a conventional replaceable-bulb indicator.

Q7. Will it fit every Hero Xtreme 125R?
Not automatically. Order only when ADJSA8C000000GS is confirmed for the exact model generation.

Q8. Does it fit Xtreme 160R or Xtreme 160R 4V?
No compatibility with those models is claimed unless the exact same part number is confirmed.

Q9. Does the package include all four indicators?
No. One front-right indicator assembly is supplied.

Q10. Can it be returned after electrical testing?
No. Electrical items are non-returnable after opening, connection, installation, testing or use.