HKK Indore
HKK Vintage Old Model Backlight & Number Plate Kit – Classic 350 Reborn / New Bullet 350 Battalion Black – Direct Fit | Lumax Tail Light + Genuine RE Reflector + Free Beading
HKK Vintage Old Model Backlight & Number Plate Kit – Classic 350 Reborn / New Bullet 350 Battalion Black – Direct Fit | Lumax Tail Light + Genuine RE Reflector + Free Beading
3.0 / 5.0
(1) 1 total reviews
Couldn't load pickup availability
Please confirm the part number and compatibility before ordering.
Complete Your Order
Motul Chain Maintenance Kit – C1 Chain Cleaner + C2 Chain Lube Road (150ml Each) – Motorcycle O-Ring/X-Ring/Z-Ring Compatible
33081208 - Metal Polishing - 15Gms Royal Enfield Metal Polish Chrome Polish For Bullet
Adds: 15 GMS
HKK Direct-Fit Old Model Backlight & Number Plate Kit for Classic 350 Reborn / New Bullet 350 / Battalion Black
Bring the traditional old-Bullet rear appearance to the newer Royal Enfield J-Series without using an older plate that requires drilling into the rear mudguard. This is the new HKK direct-fitting vintage-style rear backlight / number-plate mounting assembly developed for compatible Classic 350 Reborn, New Bullet 350 J-Series and Bullet 350 Battalion Black rear layouts.
Under The Hood upgrades the basic HKK setup into a more complete, buyer-ready package by supplying a Lumax branded square tail lamp, a new genuine Royal Enfield reflector and free beading for the mudguard-to-backlight interface.
HKK new-model direct-fit vintage backlight / number-plate mounting assembly: YES
Lumax square old-model-style tail lamp: YES
New genuine Royal Enfield reflector: YES
Mudguard / backlight beading: YES – INCLUDED FREE
Target bikes: Classic 350 Reborn, New Bullet 350 J-Series, Battalion Black
Mudguard drilling for HKK plate mounting on intended application: NO
Main Buyer Advantage – Old Model Look Without Drilling the Mudguard
Many riders want the traditional old Bullet / Standard rear look on a newer Classic 350 Reborn or Bullet 350. Earlier conversions often adapted older backlight plates to newer mudguards, which could mean drilling extra holes, permanently altering the mudguard and making the conversion harder to reverse.
This HKK new-model plate is designed to solve that problem by providing the vintage-style shape with a mounting arrangement intended for the newer Reborn / Bullet platform.
| Conversion Method | Rear Mudguard | Best Use |
|---|---|---|
| Older Classic / Standard-style plate adapted to J-Series | May require drilling / alteration | Older conversion method |
| HKK new-model direct-fit plate – THIS PRODUCT | No drilling intended for correct compatible setup | Classic Reborn / New Bullet / Battalion |
Compatibility
| Royal Enfield Model | Fitment Guidance |
|---|---|
| Classic 350 Reborn / All New Classic 350 J-Series | Target application |
| New Bullet 350 J-Series (2023+ generation) | Target application |
| Bullet 350 Battalion Black | Target application |
| Meteor 350 | Not claimed – rear assembly differs |
| Hunter 350 | Not claimed – rear assembly differs |
| Goan Classic 350 | Not claimed without physical confirmation |
| Old Classic 350 / 500 UCE | Use the separate old-model HKK kit |
| Old Bullet Standard 350 / 500 UCE | Use the separate old-model HKK kit |
Important: “J-Series” does not automatically mean every J-Series motorcycle shares the same rear mudguard or tail-light mounting. This listing is built specifically around the Classic Reborn / New Bullet / Battalion-style rear application.
Why Under The Hood Supplies a Lumax Tail Lamp
A large number of vintage conversion kits are sold with generic or local square tail lamps. Under The Hood is intentionally supplying a Lumax branded square tail lamp with this package.
The square Lumax lamp preserves the traditional old Bullet / Standard rear-light appearance while giving the buyer a clearly identified branded lamp instead of an unspecified local unit.
Generic/local tail light: NO
Lumax branded square tail light: YES
Generic reflector: NO
New genuine Royal Enfield reflector: YES
Beading charged separately: NO – supplied free with this kit
Genuine Royal Enfield Reflector Included
The main HKK backlight plate is an aftermarket HKK component; it is not a Royal Enfield genuine part. However, the reflector supplied by Under The Hood with this kit is a new genuine Royal Enfield reflector.
We do not describe the complete kit as “genuine Royal Enfield.” Only the component that is actually genuine – the reflector – is advertised as such.
Free Beading Included
The supplied beading is installed between the rear mudguard and the backlight / number-plate assembly where applicable. It helps create a cleaner interface, reduces an unfinished metal-to-metal appearance and can help minimise minor rubbing or rattling between adjoining surfaces.
The beading is included FREE with the Under The Hood kit. It should not be assumed to be a genuine Royal Enfield component unless separately stated on the supplied item.
What Does “Direct Fit” Mean Here?
Direct fit refers primarily to the physical HKK backlight / number-plate mounting arrangement on the intended compatible rear mudguard.
It does not automatically guarantee that every electrical terminal on the Lumax lamp will plug directly into every factory harness without inspection. Depending on the motorcycle and the lamp connector supplied in the current batch, the installer may need to connect or adapt the:
- tail / running-light feed
- brake-light feed
- earth / ground connection
Do not cut the motorcycle's main wiring harness unnecessarily. If connector styles differ, professional electrical fitment is recommended.
Old Model / Vintage Rear Look
This conversion is for riders who prefer the traditional rear styling associated with older Bullet / Standard motorcycles:
- large vintage-style rear backlight / number-plate panel
- square Lumax tail lamp
- separate reflector
- clean vertical rear-mudguard-mounted appearance
- more traditional Bullet character than the standard modern Reborn rear assembly
HKK Kit vs Genuine / OEM-Style Conversion
| Feature | UTH HKK Vintage Kit | Genuine/OEM-Style Conversion |
|---|---|---|
| Main backlight / number-plate plate | HKK aftermarket | Genuine / OEM-style components |
| Purpose | Vintage modification / old-model look | Factory-style conversion |
| Tail lamp supplied in this UTH kit | Lumax branded | Depends on OEM kit |
| Reflector in this UTH kit | Genuine Royal Enfield | OEM arrangement |
| Beading | Included free | Depends on kit |
What You Receive
- 1 × HKK new-model direct-fit vintage rear backlight / number-plate mounting assembly
- 1 × Lumax square tail lamp
- 1 × New genuine Royal Enfield reflector
- 1 × Beading – FREE
Registration number plate itself is not claimed as included unless specifically shown in the product photographs or stated separately. Mounting bolts, nuts, washers, electrical terminals or extra hardware should also be considered included only when shown / supplied with the current batch.
Installation Guidance
- Confirm that the motorcycle is the compatible Classic Reborn / New Bullet / Battalion-style rear application.
- Remove the existing rear-light / number-plate components as required.
- Clean the mudguard mounting area before installing the new assembly.
- Trial-fit the HKK plate before tightening or wiring anything.
- Confirm that the intended factory mounting points align without drilling.
- Position the supplied beading correctly between adjoining surfaces.
- Install the Lumax lamp and genuine RE reflector.
- Route wiring away from tyre contact, sharp edges, heat and moving components.
- Connect tail light, brake light and earth correctly.
- Test running light and brake light before final tightening.
- Check rear-tyre and number-plate clearance through suspension movement.
- Recheck fasteners after the first few rides.
Buyer FAQs
Does this fit Classic 350 Reborn?
Yes. Classic 350 Reborn / All New Classic 350 is one of the main target applications.
Does it fit New Bullet 350 J-Series?
Yes, for the matching new-model rear layout.
Does it fit Bullet 350 Battalion Black?
Yes. Battalion Black is one of the key applications of this new direct-fit HKK setup.
Do I need to drill holes in the rear mudguard?
The purpose of this new HKK version is to mount on the intended Reborn / New Bullet / Battalion application without drilling the mudguard. Always trial-fit before final installation.
Why did people previously drill holes?
Older vintage-style plates were based around older Classic / Standard mounting positions. Adapting those plates to newer rear mudguards could require additional holes or fabrication.
Does the kit include a tail light?
Yes. Under The Hood supplies a Lumax branded square tail lamp.
Is the tail light a local / unbranded lamp?
No. The supplied lamp is Lumax branded.
Does the kit include a reflector?
Yes. A new genuine Royal Enfield reflector is included.
Is beading included?
Yes. Beading is supplied free with the kit.
Is the whole kit genuine Royal Enfield?
No. The backlight / number-plate mounting assembly is HKK aftermarket. The reflector supplied in this bundle is genuine Royal Enfield.
Is the electrical connection guaranteed plug-and-play?
The direct-fit claim refers to the physical HKK plate mounting. The Lumax lamp wiring / connector should be checked during installation and may require correct terminal or connector adaptation.
Does it fit Meteor 350 or Hunter 350?
No fitment claim is made for those motorcycles.
Does it fit old UCE Classic / Standard?
Use the separate HKK old-model kit intended for the older mudguard layout.
Buyer Search Terms
HKK backlight Reborn, HKK backlight Battalion, HKK number plate Reborn, Classic 350 Reborn old model backlight, Reborn vintage tail light, Bullet 350 Battalion backlight, Battalion Black number plate, Battalion direct fit backlight, Reborn direct fit number plate, old Bullet look Reborn, vintage backlight Reborn, Lumax tail light Reborn, Lumax square backlight, New Bullet 350 vintage backlight, Royal Enfield rear number plate conversion, Reborn tail light conversion, Bullet Battalion modification, no drilling backlight Reborn, HKK old model backlight kit
Share
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue

Become a Dealer Partner
We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.
Maine "Under The Hood" se Direct Fit HKK Number Plate mangwayi thi, lekin product ki quality aur fitting kaafi disappointing rahi:
Fitting Issue: Ise "Direct Fit" bolkar becha ja raha hai, lekin lagane ke baad ismein clearly gap dikhai deta hai.
Missing Hardware: Purane bolts chote pad jaate hain aur packet mein naye bolts nahi diye gaye, jiske liye mujhe alag se market jaana pada.
Damaged Light: Saath mein aayi Lumax light andar se cracked thi, jiski wajah se 3 ki jagah sirf 2 hi pech (screws) lag paaye.
No Coupler: Lumax light ki wiring mein coupler nahi diya gaya hai. Bina coupler ke direct connection karna mushkil hai aur market mein iska coupler dhoondhne mein bahut pareshani hui.
Is price point par aisi quality aur incomplete hardware bilkul expect nahi kiya tha.
Option 2: Short & Direct Review (Hinglish - Instagram/YouTube comments ke liye)
Direct Fit HKK number plate mangwayi thi, bilkul worth it nahi hai. Na toh fitting proper hai (gap dikhta hai), aur na hi saath mein lambe bolts diye hain—purane chote padte hain. Upar se Lumax light andar se crack nikli (sirf 2 hi pech lage) aur wiring mein coupler bhi nahi diya, jo market mein badi mushkil se milta hai. Product bhejne se pehle quality check zaroor karni chahiye.
Option 3: Crisp English Review (Agar aap pure English mein post karna chahein)
Ordered the Direct Fit HKK Number Plate from Under The Hood, and the experience was quite disappointing. Despite being advertised as "Direct Fit," it leaves a noticeable gap after installation. The stock bolts are too short, forcing me to buy new ones from the market. Additionally, the Lumax light arrived cracked from the inside (could only fit 2 screws instead of 3) and didn't come with a wiring coupler, which is very hard to find locally. Poor quality control.
Kya aap chahte hain ki main:
Ismein bike ka model naam add karke review ko aur specific bana doon?
Unke customer support ko bhejne ke liye ek replacement/refund complaint message likh doon?
Bilkul, aapke naye points (achhi build quality lekin high price) ko add karke maine teeno reviews ko update kar diya hai. Isse aapka review kaafi balanced aur genuine lagega:
Option 1: Detailed & Balanced Review (Google Reviews ya Website ke liye best)
Rating: ★★★☆☆ (3/5)
Maine "Under The Hood" se Direct Fit HKK Number Plate mangwayi thi. Product ki build quality aur finish toh kaafi achhi hai, lekin iske high price ke hisab se fitting aur packaging mein kaafi kamiyan hain:
Fitting Issue: Ise "Direct Fit" bolkar becha ja raha hai, lekin lagane ke baad ismein clearly gap dikhai deta hai.
Missing Hardware: Purane bolts chote pad jaate hain aur packet mein naye bolts nahi diye gaye, jiske liye mujhe alag se market jaana pada.
Damaged Light: Saath mein aayi Lumax light andar se cracked thi, jiski wajah se 3 ki jagah sirf 2 hi pech (screws) lag paaye.
No Coupler: Lumax light ki wiring mein coupler nahi diya gaya hai, aur market mein iska coupler dhoondhne mein bahut pareshani hui.
Product ki material quality achhi hai, lekin itna zyada price lene ke baad company ko proper bolts, coupler aur damage-free light zaroor deni chahiye.