HKK Indore Chrome Silencer with Hunter 350 Heat Shield for Royal Enfield Hunter 350

Upgrade the look of your Royal Enfield Hunter 350 with this HKK Indore chrome aftermarket silencer, designed with a bold raised HUNTER 350 side plate for a distinctive custom appearance.

The long chrome body, dedicated mounting bracket and attached side shield give the motorcycle a more premium and personalised exhaust look while keeping the product clearly specific to the Hunter 350 platform.

Please note: This is an aftermarket HKK Indore product. It is not a Royal Enfield genuine or OEM silencer.

Key Features

• Designed for the Royal Enfield Hunter 350
• HKK Indore branded aftermarket silencer
• Chrome-finish external body
• Raised HUNTER 350 side branding
• Attached decorative and protective side plate
• Dedicated welded mounting bracket
• Single rear silencer supplied
• Ideal for replacement or chrome-themed custom builds

Confirmed Compatibility

Check Before Ordering

Before ordering, please confirm that your motorcycle is a Royal Enfield Hunter 350 and compare the existing silencer connection and mounting position. Exhaust layouts can differ even between motorcycles that use the same engine family.

Fitment is not confirmed for:

• Classic 350 Reborn
• Bullet 350 J-Series
• Meteor 350
• Goan Classic 350

Do Not Order For

• Classic 350 UCE or Classic 500 UCE
• Bullet 350 UCE or Bullet 500 UCE
• Electra 350 UCE
• Thunderbird 350 / 500
• Himalayan 411 or Scram 411
• Himalayan 450 or Guerrilla 450
• Interceptor 650 or Continental GT 650
• Super Meteor 650, Shotgun 650, Bear 650 or Classic 650

What This Product Is

• One HKK Indore aftermarket rear silencer
• A chrome-finish muffler for the Hunter 350
• A model-specific replacement or custom exhaust component
• A silencer with an attached Hunter 350 side plate

What This Product Is Not

• Not a Royal Enfield genuine silencer
• Not a complete exhaust system
• Not a bend pipe or header pipe
• Not a catalytic converter
• Not an O2-sensor pipe
• Not a universal Royal Enfield exhaust
• Not a pair of silencers

Chrome Finish and Design

The silencer features a bright chrome-style outer finish with a large multi-piece side shield. Raised HUNTER 350 lettering gives the exhaust a model-specific appearance that suits riders looking for a more eye-catching alternative to the standard black silencer.

The visible HKK “Old Is Gold” marking helps identify the product as an HKK Indore aftermarket exhaust.

Sound Expectations

The final exhaust note can vary depending on your motorcycle, catalytic converter, bend pipe, engine condition and installation. A sound video should be reviewed before ordering when the exact exhaust tone is an important buying factor.

No fixed claim is made for loudness, bass level, baffle count or exact decibel output.

What’s Included

• 1 × HKK Indore chrome Hunter 350 silencer
• 1 × Attached HUNTER 350 side heat-shield / styling plate

Not Confirmed as Included

• Bend pipe or header pipe
• Exhaust clamp
• Exhaust gasket or sealing sleeve
• Mounting bolt, nut or washer
• Spacer
• Catalytic converter
• O2 sensor

Parts You May Need During Installation

Depending on the condition and configuration of your existing exhaust, your technician may need:

• A suitable exhaust clamp
• An exhaust joint gasket or sealing sleeve
• A mounting bolt, nut, washer or spacer
• The original Hunter 350 bend pipe in reusable condition

Installation Guidance

• Professional installation is recommended.
• Compare the inlet connection with the existing Hunter 350 exhaust before fitting.
• Ensure the mounting bracket aligns without forcing or bending the silencer.
• Do not drill, cut or weld the silencer before checking fitment.
• Check clearance from the swingarm, footrest, brake components and nearby body panels.
• Inspect the joint for exhaust leakage after installation.
• Recheck the clamp and mounting hardware after the first full heat cycle.

Care and Maintenance

• Allow the silencer to cool fully before cleaning.
• Use a soft microfibre cloth and mild automotive shampoo.
• Avoid acidic wheel cleaners and abrasive pads.
• Dry the chrome surface after washing.
• Remove mud and road contamination promptly.
• Check the mounting bracket, side-plate fasteners and clamp periodically.
• Use only a chrome-safe polish when required.

Important Fitment and Return Note

This is an aftermarket exhaust product. Please verify the motorcycle model, exhaust connection, mounting position and required hardware before installation.

Do not start the motorcycle until fitment and supplied contents have been checked. Once installed and used, the silencer may develop clamp marks, mounting marks, carbon deposits, soot or heat-related finish changes.

Compliance Note

Aftermarket exhaust noise and emission requirements can vary depending on the motorcycle configuration and local regulations. No road-use, noise or emission approval should be assumed unless supported by product-specific certification.

Frequently Asked Questions

Is this a genuine Royal Enfield silencer?

No. This is an HKK Indore aftermarket silencer made for the Hunter 350 application.

Which motorcycle does it fit?

It is designed for the Royal Enfield Hunter 350 J-Series.

Does it fit Classic 350 Reborn, Bullet 350 or Meteor 350?

Fitment is not confirmed for those models. Please do not order only because they use a related J-Series engine.

Is the HUNTER 350 side plate included?

Yes. The displayed product includes the attached raised Hunter 350 side plate.

Is this sold as one silencer or a pair?

This listing is for one silencer.

Is this a complete exhaust system?

No. This listing is for the rear silencer only.

Is the bend pipe included?

No bend pipe is shown or confirmed as included.

Is the exhaust clamp included?

The clamp is not confirmed as included. Please check the final package contents before installation.

What sound does it produce?

The sound can vary with the bend pipe, catalytic converter, engine condition and installation. Review the available sound video before ordering when sound is your main priority.

Is the baffle removable?

The baffle arrangement is not confirmed.

Is it made from stainless steel?

The exact base material is not stated here, so stainless-steel construction is not claimed.

Will it improve power or mileage?

This product is intended mainly to change the exhaust appearance and sound. No specific power, torque or mileage improvement is promised.

Will installation require modification?

Modification should not be attempted before checking the inlet connection and mounting bracket. Professional installation is recommended.

Can the silencer be returned after installation?

Please review the current Under The Hood return policy before ordering. Installed exhaust parts can show immediate fitting, carbon and heat marks.

• HKK Indore Hunter 350 silencer
• Hunter 350 chrome silencer
• Hunter 350 exhaust with plate
• HKK Hunter chrome exhaust
• Hunter 350 silencer with heat shield
• Hunter 350 chrome muffler
• Hunter 350 aftermarket exhaust

Royal Enfield and Hunter 350 are trademarks or model names of their respective owner. This is an aftermarket HKK Indore product and is not a Royal Enfield genuine spare part.