• LIU HJG shocker mount clamp 50–60mm pair for fog lights
  • LIU HJG fog light clamp 55mm black CNC mounting bracket
  • HJG auxiliary light clamp with grip teeth anti-slip design
  • LIU HJG Shocker Mount Clamp 50–60mm | Fog Light Bracket (Pair)
  • Heavy-duty LIU HJG shocker mount clamp (pair) for fog/aux lights. Fits ~50–60mm tubes (verify OD). Stable, rustproof, adjustable.
  • LIU HJG Shocker Mount Clamp (Fog Light / Aux Light Bracket)
1 6

UNDER THE HOOD

LIU HJG Shocker Mount Clamp (Fog Light / Aux Light Bracket) – 50–60mm Tube/Shocker Universal Fit | Pack of 2 | Heavy-Duty CNC Clamp

LIU HJG Shocker Mount Clamp (Fog Light / Aux Light Bracket) – 50–60mm Tube/Shocker Universal Fit | Pack of 2 | Heavy-Duty CNC Clamp

Rs. 490.00
Rs. 620.00 Rs. 490.00
Sale Sold out
Shipping calculated at checkout.

If your fog lights keep vibrating, slipping, or losing alignment on bad roads, this LIU HJG Shocker Mount Clamp is the clean, rigid fix. It’s a heavy-duty, adjustable clamp bracket built to mount auxiliary/fog lights, DRLs, work lights, or small LED pods on a round tube / shocker / mounting rod—without drilling or welding.

This clamp style is commonly used on bikes/scooters/vehicles where you want a strong grip + angle adjustability so the beam stays locked even on rough patches. Many marketplace listings mention aluminium alloy build + grip teeth and specify a ~5.5cm (55mm) mount diameter for this type of LIU HJG clamp. 

Important fitment note (reduces returns): This is a large-diameter clamp type (commonly listed around 50–60mm / ~55mm depending on variant/batch). It is NOT the 22mm/28mm handlebar clamp style. Please measure your tube/shocker outer diameter before ordering. If unsure, Fitment check is available on WhatsApp—send a photo + measurement.

Key Features 

  • Universal mounting bracket for fog lights / auxiliary lights / LED pods 

  • Heavy-duty metal / alloy clamp body designed for stability on rough roads 

  • Adjustable clamp fit (variant dependent) for round tubes/shockers 

  • Grip teeth / anti-slip design helps reduce rotation and beam drift (common seller spec) 

  • Rust/weather resistant for daily + touring use 

  • Pack of 2 clamps for left + right symmetrical mounting 

  • Works for bikes, scooters, cars, SUVs, Jeeps, etc. where a suitable round bar/shocker mount exists 

  • Clean install—no welding, no permanent modifications (typical use case) 

Best for: touring stability • highway visibility upgrades • rugged/off-road use where clamps usually loosen

Compatibility Table (Model | Fitment | Notes)

Model Fitment Notes
Universal (Bikes/Scooters/Cars/SUVs) ✅ Compatible if you have a round tube/shocker OD ~50–60mm Many listings specify ~5.5cm (55mm) mount diameter; variant/batch may vary—measure before ordering.
Royal Enfield / KTM / Yamaha / Bajaj / Hero (any model) ❓ Verify fitment before ordering Fit depends on your mounting point OD, not bike model. Send OD measurement on WhatsApp for confirmation.
22mm / 28mm Handlebar / crash guard clamps ❌ Not compatible This is a different clamp type; do not buy if you need 22/28mm sizes. (Those are separate products in the market.)

Variants 

  • Pack Size: Pack of 2 clamps (left + right)

  • Diameter Variant: Commonly sold around 50–60mm (~55mm) for this style. ❓Verify your OD before ordering. 

What’s in the Box

  • 2 × LIU HJG Shocker Mount Clamps (pair) 

  • Mounting hardware (screws/bolts) 

  • Anti-slip rubber may be included depending on listing/batch (brand listing mentions rubber for clamp kits). 

Installation Notes 

Tools needed: Allen key / spanner set, measuring scale/vernier, thread-lock (recommended)

  1. Measure OD of your shocker/tube/crash bar (outer diameter).

  2. Open clamp halves, position rubber insert (if provided), seat clamp evenly.

  3. Tighten bolts alternating side-to-side so the clamp closes uniformly.

  4. Set light angle, then final tighten (use medium thread-lock if your bike vibrates a lot).

  5. After 50–100 km, re-check bolt tightness.

Warnings

  • Over-tightening can damage tubing or strip threads.

  • If your OD is smaller/larger than this clamp range, it will slip or not close—verify before ordering.

FAQs 

Q1. Does this LIU HJG clamp fit my bike?
Yes if your mounting point (tube/shocker) outer diameter matches this clamp size (commonly sold around 50–60mm / ~55mm). If you share OD + a photo on WhatsApp, we’ll confirm before dispatch. 

Q2. What is this clamp used for?
It’s a mounting bracket to fix fog lights / auxiliary lights / LED pods / DRLs onto a suitable round bar/shocker so the light doesn’t rotate or vibrate loose. 

Q3. Is it Genuine/OEM?
This product is sold as LIU HJG branded in the market. We do not claim “OEM for any motorcycle brand.” (It’s an aftermarket universal mounting accessory.) 

Q4. What’s included in the package?
Typically 2 clamps + mounting hardware. Some listings include anti-slip rubber inserts—contents can vary by batch; we ship what’s inside the sealed pack. 

Q5. Will it rust in rain?
These clamp kits are commonly listed as rustproof/weather-resistant for regular riding conditions. 

Q6. Can I mount it on handlebar (22mm) or fat bar (28mm)?
Not this one. This listing is for a large-diameter shocker/tube clamp type. For 22/28mm you need a different clamp model. (If confused, WhatsApp us.) 

Q7. Do I need drilling or welding?
No—installation is clamp-based. However, correct sizing and proper tightening are essential for a safe mount. 

Q8. Will it hold heavy lights?
It’s designed as a heavy-duty clamp for stable mounting, but maximum safe load depends on your light weight, mounting point strength, and vibration. For very heavy lights, use reinforced brackets and thread-lock.

View full details