LIU HJG TF-010 4-Wire Hazard Flasher Module for Motorcycle Indicators – 22 Functions, 12V

This is a 4-wire multi-function hazard flasher module for motorcycle indicator circuits — not a fog-light relay. The unit shown is the LIU HJG TF-010, designed to add multi-pattern hazard/flashing operation to a compatible 12V bike indicator system.

The module itself is marked TF-010, 12V DC, 80W × 2 and 22 FUNCTION HIGH QUALITY FLASH. The label also identifies connection functions for Negative, Positive, Flash and Left-Right Indicator. Current market listings for this same TF-010 identify it as a 22-mode / 22-pattern motorcycle hazard flasher.

Because this is a universal electrical accessory rather than a bike-specific plug-and-play part, correct installation depends on your motorcycle's indicator wiring. Please read the compatibility and pre-purchase checks below instead of ordering only by bike name.

Product Identification

What Does This TF-010 Flasher Do?

The TF-010 is used in the motorcycle indicator circuit to create hazard-style and multi-pattern flashing. Instead of being sold as a vague “universal relay”, this product should be understood as a 4-wire electronic flasher module for riders who want a hazard / flashing function from their indicator lights.

It is commonly searched for as 4 wire flasher for bike, HJG hazard flasher, TF-010 flasher, 22 mode bike flasher, indicator hazard module, bike indicator flasher module and motorcycle hazard flasher.

Why the 4-Wire Configuration Matters

This is not the same product as a normal 2-pin or 3-pin OEM indicator flasher. The TF-010 has four electrical functions identified on its label: power positive, negative/ground, flash control and left-right indicator connection. That is why buyers replacing a conventional factory flasher should not assume the TF-010 is a direct socket replacement.

Installation may require tapping/splicing into the relevant indicator wiring depending on the motorcycle. Wire colours can vary between batches or installations, so identify each connection by function and the supplied module diagram — not by colour alone.

Key Features

• 22-function multi-pattern flasher: designed to provide multiple flashing styles rather than one fixed blink pattern.
• 4-wire configuration: designed around positive, negative, flash and left/right indicator connections.
• 12V DC: intended for compatible 12V motorcycle/scooter electrical systems.
• 80W × 2 marking: the physical module is marked with an 80W × 2 output specification.
• Hazard / indicator application: intended to work with the motorcycle's indicator circuit rather than as an auxiliary fog-light relay.
• Compact control module: can be positioned within the motorcycle wiring area when installed correctly and protected from heat, movement and direct water exposure.
• Universal-style installation: useful across many 12V motorcycles where the indicator circuit and wiring arrangement are suitable.

What You Are Buying

• 1 × LIU HJG TF-010 4-wire hazard flasher module
• Attached wiring leads as shown

Not included: indicators, handlebar switch, complete wiring harness, fuse holder, vehicle-specific plug couplers, mounting hardware, or the Under The Hood key strap visible in the reference photographs.

What This Product Is NOT

• Not a fog-light relay.
• Not a standard automotive 4-pin power relay.
• Not a complete fog-light wiring harness.
• Not a pair of indicators.
• Not automatically a direct replacement for your motorcycle's 2-pin or 3-pin OEM indicator flasher.
• Not advertised here as plug-and-play for every motorcycle.
• Not claimed as waterproof because no IP rating is printed on the supplied product.
• Not claimed as CANBUS compatible because that specification is not printed on this unit.

Compatibility – Read Before Ordering

LED or Bulb Indicators?

Some current sellers market the TF-010 for both LED and conventional bulb indicator setups. However, the physical unit supplied here does not print a specific “LED only” or “bulb only” statement. For that reason, this listing does not promise compatibility with every indicator type or every motorcycle electrical system. Check indicator load and wiring before installation, especially if the motorcycle uses unusual OEM electronics or a monitored lighting circuit.

Before You Buy – 7 Checks

1. Confirm the product you need: this is a hazard / multi-pattern indicator flasher module, not a fog-light relay.
2. Check model: TF-010.
3. Check voltage: your application must be suitable for 12V DC.
4. Check wire requirement: this is a 4-wire module.
5. Check indicator wiring: locate the relevant positive, ground, flash/control and indicator connections before installation.
6. Do not rely on bike name alone: two versions of the same motorcycle may use different indicator wiring.
7. Use an experienced installer: if you cannot identify the circuit with a multimeter/wiring diagram, professional installation is recommended.

TF-010 vs Common Products Buyers Confuse With It

Installation Guidance

• Professional installation is recommended.
• Disconnect the motorcycle battery before cutting, tapping or joining electrical wires.
• Refer to the TF-010 markings/diagram and your motorcycle's wiring diagram.
• Do not install by matching wire colour alone.
• Insulate every joint properly and secure the module away from exhaust heat, sharp edges, steering movement and moving parts.
• Do not place the module where it will remain submerged or receive direct high-pressure washing; no IP waterproof rating is being claimed for this unit.
• After installation, test normal left/right indicator operation as well as the required hazard/flasher function before riding.

Important Road-Use Note

Multi-pattern and rapid flashing modes may be restricted for public-road use in some jurisdictions, particularly patterns that resemble emergency-service lighting. Use the product responsibly and comply with applicable local traffic and vehicle-lighting rules.

Frequently Asked Questions

Q1. Is TF-010 a relay?
The physical label uses the word “Relay”, but in motorcycle accessory usage this product is correctly sold and searched as a hazard flasher / 4-wire flasher module. It is not a conventional fog-light or horn power relay.

Q2. Is this the HJG 22-mode hazard flasher?
Yes. Current listings for LIU HJG TF-010 identify it as a 22-mode / 22-function motorcycle hazard flasher, and the supplied module itself is printed “22 FUNCTION”.

Q3. Is this a 4-wire flasher?
Yes. This listing is for the 4-wire TF-010 module shown in the photographs.

Q4. What voltage is it?
The unit is marked 12V DC.

Q5. What does 80W × 2 mean?
80W × 2 is the output marking printed on the module. This listing reproduces the manufacturer's marking and does not reinterpret it as a guarantee for every possible indicator load or wiring arrangement.

Q6. Will it make all four indicators flash?
The TF-010 is marketed as a motorcycle hazard flasher and is designed for left/right indicator integration. Final behaviour depends on how it is wired into the motorcycle's indicator circuit.

Q7. Will it fit my Royal Enfield?
Possibly, but it is not Royal Enfield-specific. Confirm the 12V indicator wiring and installation method before ordering.

Q8. Will it fit KTM, Bajaj, Hero, Honda, TVS or Yamaha?
It is sold as a universal motorcycle flasher, but fitment is electrical rather than model-specific. Verify your wiring first.

Q9. Does it replace the stock 2-pin flasher?
Not as a direct socket replacement. TF-010 is a 4-wire module and must be integrated according to its wiring functions.

Q10. Does it replace a 3-pin flasher?
Not directly unless a competent installer confirms and adapts the circuit correctly.

Q11. Is a separate switch included?
No separate handlebar switch is shown or included in this listing. You receive the flasher module shown in the photographs.

Q12. Is this plug-and-play?
No universal plug-and-play claim is made. The module has loose wiring leads and installation depends on the bike's indicator circuit.

Q13. Does it work with LED indicators?
The TF-010 is commonly marketed for motorcycle indicator systems, including LED applications, but the supplied module does not print a specific LED compatibility statement. Confirm the load and electrical setup before installation.

Q14. Does it work with normal bulb indicators?
Some sellers market TF-010 for bulb indicators as well, but compatibility depends on actual lamp load and bike wiring. Check before installation.

Q15. Is it waterproof?
No waterproof/IP rating is printed on the supplied module, so we do not advertise it as waterproof.

Q16. Is this a fog-light flasher?
This listing is specifically for a motorcycle indicator hazard flasher module. Do not purchase it as a fog-light power relay.

Q17. How many flash patterns does it have?
The supplied product is marked “22 FUNCTION”, and current TF-010 listings describe it as a 22-mode / 22-pattern flasher.

Q18. Can I install it myself?
Only if you understand 12V motorcycle wiring and can correctly identify the indicator circuit. Otherwise use an experienced motorcycle electrician/accessory installer.

Search Terms Buyers Commonly Use

LIU HJG TF-010 flasher, HJG TF010 hazard flasher, 4 wire flasher for bike, four wire bike flasher, HJG 22 mode flasher, 22 function flasher, motorcycle hazard flasher, bike hazard light module, indicator hazard flasher, bike indicator flasher module, multi pattern flasher for motorcycle, universal hazard flasher for bike, 12V bike flasher, HJG indicator flasher.

Electrical Item / Return-Prevention Note

Please confirm the product type, model, voltage and wiring requirement before opening or installing. Do not cut, splice, connect or alter the module until compatibility has been checked. Electrical components that have been installed, connected or altered may not be eligible for return under the store's applicable return policy. Keep the original packaging and record a complete unboxing video for any wrong/damaged-item claim.