MK Clutch Friction Plate Set for Hero Karizma / Karizma R / ZMR – 5 Plates (1103)

Replace worn clutch friction plates on an original-generation Hero Karizma or Karizma ZMR with this MK-branded five-plate set. MK part number 1103 is listed in the MK Auto clutch-plate catalogue for the Karizma / Karizma ZMR application. This is an MK aftermarket replacement in MK retail packaging, not a Hero Genuine Parts product. Before purchase, identify the motorcycle and compare the existing clutch assembly with the part being ordered.

Quick product check

Compatibility and exclusions

The MK parts catalogue names Karizma and Karizma ZMR against manufacturer code 1103, with a quantity of five plates. Model names are not substitutes for inspecting the installed clutch: confirm the clutch basket/plate design and quantity before ordering, particularly for repaired, modified or previously replaced assemblies.

Do not rely on engine capacity or similar-looking plates alone. The number of friction plates, locating tabs, inner and outer diameters, clutch basket design and assembly revision must agree with the motorcycle being serviced. This page does not promise every production year of the Karizma family.

What this clutch friction plate set does

In a conventional motorcycle multi-plate clutch, friction plates work with the corresponding steel separator plates to transmit engine torque when the clutch engages and allow the engine and gearbox to disengage for gear changes. Over time friction material can wear, glaze or become contaminated. Replacing the friction plates is appropriate only when inspection confirms they are below the service limit or otherwise unserviceable.

Why choose this MK kit?

• Correct product identity: MK catalogue number 1103 rather than a generic unbranded clutch set.
• Complete stated friction-plate quantity: five clutch friction plates in a single retail set.
• Specific Karizma-family catalogue application: excludes unrelated Hero clutch part numbers.
• Practical replacement option: a branded aftermarket friction-plate set for maintenance work when a matching MK application is required.

No specific torque increase, improved fuel economy, extended clutch lifespan, race-grade performance or equivalence to Hero Genuine parts is promised.

What is included in the package?

• Included: 5 MK clutch friction plates, supplied as a set.
• Not included: steel separator plates, clutch springs, clutch hub, clutch basket, pressure plate, engine/clutch cover gasket, engine oil, tools, or installation labour.
• Not included: any UTH-branded keychain or lanyard shown alongside the product for photographic identification.

Before you order: clutch identification checklist

• Confirm that the motorcycle is from the original Karizma / Karizma R / Karizma ZMR family, not the newer Karizma XMR 210.
• Check the existing clutch for five friction plates of the correct design and confirm the bike-specific service parts reference.
• Compare the outer locating tabs, inner opening, plate profile and arrangement with the original clutch components.
• Check whether the motorcycle has previously received a non-original clutch basket or a different revision.
• If uncertain, ask your technician to identify the installed clutch before fitting the new plates.

Clutch symptoms: diagnosis before replacing

A slipping clutch can cause engine speed to rise without a corresponding increase in road speed, especially under load. Other possible complaints include shudder on take-off, dragging, difficult neutral selection, or uneven engagement. These symptoms do not prove the friction plates have failed. Incorrect clutch-cable adjustment, worn or warped steel plates, tired springs, unsuitable or contaminated oil and assembly faults can produce similar behaviour.

A qualified technician should inspect the friction-plate thickness, wear, basket grooves, spring condition, separator-plate flatness and the clutch-release mechanism according to the motorcycle service manual. Replace additional components only when inspection requires it.

Installation and service notes

• Use a qualified motorcycle mechanic familiar with the Karizma clutch assembly.
• Follow the appropriate service manual for plate order/orientation, wear limits, fastener tightening and adjustment.
• Where specified by the service procedure, prepare friction plates with the correct motorcycle engine oil before assembly; do not fit dry unless the manufacturer explicitly requires it.
• Use the motorcycle maker’s specified oil grade and clutch-compatible formulation. Incorrect lubricant may affect a wet clutch.
• Inspect steel separator plates, clutch springs, hub and basket rather than replacing friction plates in isolation without diagnosis.
• Replace disturbed gaskets/seals as required, recheck clutch free play and inspect for leaks before road use.
• Do not ride the motorcycle if the clutch drags, slips severely or fails to disengage after installation.

Brand and OEM clarification

MK 1103 is a retail aftermarket set sold under the MK brand. “Hero Karizma” and “Karizma ZMR” are model-application names, not statements that this product is packaged or warranted by Hero MotoCorp. A Hero OE part number has not been verified as an exact cross-reference for this MK set and is intentionally not advertised here.

Frequently asked questions

Is this product made by MK or Hero?

This is an MK-branded aftermarket clutch friction plate set, not a Hero Genuine Parts-branded kit.

What is the exact MK part number?

The MK manufacturer catalogue number is 1103.

How many clutch plates come in one set?

One retail set contains five friction plates.

Is it listed for the original Hero Karizma?

Yes. MK lists code 1103 for the Karizma application; confirm the installed clutch design before ordering.

Is it listed for the Karizma ZMR?

Yes. MK specifically names Karizma ZMR against code 1103. Verify the existing clutch and revision.

Will it fit a Hero Karizma R?

It belongs to the original Karizma family; the installed clutch configuration should be checked before purchase.

Will these plates fit the new Karizma XMR 210?

No XMR 210 application has been established for MK 1103. Do not assume compatibility.

Will these fit the Hero CBZ or Ambition?

MK lists CBZ/Ambition under a different catalogue number, 1102. This listing is not for those models.

Are steel plates and clutch springs included?

No. This pack contains only five friction plates; steel plates, springs and other clutch parts are sold separately.

Is this the complete clutch assembly?

No. It is a friction-plate set, not a basket, hub, pressure plate or assembled clutch.

Does clutch slipping always mean these plates need replacement?

No. Cable adjustment, springs, oil and clutch component wear should be diagnosed before replacement.

Can the kit be fitted without dismantling the engine cover?

The appropriate clutch access procedure must be followed. A qualified mechanic should perform the work using the model-specific service manual.

Is soaking in oil required before fitting?

Follow the service procedure for the motorcycle and the clutch manufacturer. Do not assume an unverified universal soaking time.

Is there a performance or life guarantee?

No additional horsepower, torque, pickup, service-life or OEM-equivalence guarantee is claimed for this retail set.

How do I avoid ordering the wrong Karizma clutch plates?

Match the motorcycle model, current clutch assembly, five-plate quantity, and tab/profile geometry before purchase.

Are the plate materials or exact dimensions available?

They have not been published in the verified MK catalogue data reviewed for this code. Match against the existing clutch or consult the appropriate service manual.

Search and identification terms

MK Karizma clutch plate 1103; MK Karizma R clutch plates; Hero Karizma 223 clutch friction plates; Karizma ZMR clutch plate set; 5-piece motorcycle clutch friction plates; MK Auto Karizma clutch kit.