Moto Genius Frame Slider Crash Guard Pair for Yamaha R15 V2 / V3 & MT-15 – Red

Moto Genius Red Frame Slider Pair for Yamaha R15 V2, R15 V3 & MT-15

Give your Yamaha a distinctive red-accented finish with this aftermarket frame slider / motorcycle crash protector pair. Supplied as two red metal-bodied slider assemblies with black end sections and Yamaha-emblem outer caps, the set is intended for compatible motorcycles described on the product packaging as Yamaha R15 V2, R15 V3 and MT-15.

Frame sliders are designed to offer a sacrificial contact point in some low-speed tip-overs or slides. Actual protection depends on the impact, mounting location and installation. They are not a guarantee against damage to the fairing, engine, chassis or rider.

Important fitment check: R15 V2, R15 V3 and MT-15 are the applications printed on this product's packaging. Different model generations and mounting arrangements can require different bolts, spacers or brackets. Check the mounting arrangement on your exact motorcycle before purchase. Do not assume fitment for R15 V4, R15M or other Yamaha models.

Quick Product Identification

Why Choose This Frame Slider Style?

• Two-sided set: two red sliders are provided for the motorcycle rather than a single replacement piece.
• Red and black styling: metallic red body sections and black outer ends suit riders looking for a visible colour accent.
• Frame protection accessory: intended to provide an outward contact point under certain fall or slide conditions, subject to fitment and impact circumstances.
• Clear model selection: the actual package names R15 V2 / R15 V3 / MT-15, avoiding the misleading assumption that every Yamaha R15 variant uses the same fittings.
• Inspectable construction: the mounting bases, outer caps and slider bodies can be checked visually before installation.

What this item is not: it is not a full tubular crash cage, engine guard, fork axle slider or rear swingarm spool kit. Do not assume a frame slider offers the same coverage as a dedicated crash cage.

Yamaha Compatibility: Read Before Ordering

Fitment is not based on engine displacement alone. Differences in frame mounting bosses, fastener length, spacers, side fairings and existing aftermarket accessories can change the installation requirements. Customers using non-standard fairings, engine guards or chassis modifications should verify clearance first.

Frame Slider vs Fork Slider vs Crash Guard

• Frame slider (this product): extends outward from a suitable chassis/frame-side mounting location to provide a potential contact point in some incidents.
• Fork or axle slider: attaches at or near a wheel axle to help protect wheel-end components. It is a separate accessory.
• Full crash guard or crash cage: generally uses larger tubular or multi-point structures with a different mounting and coverage arrangement.

Select the protection accessory according to the component and mounting position, not just the phrase “crash guard” in a marketplace title.

What You Receive

• 2 × red frame slider assemblies with the outer caps shown in the product photos (one pair).

Not confirmed as included: a complete model-specific fixing bolt set, spacer kit, mounting adaptor plates, tools or installation instructions. Visible preassembled fasteners are not proof that all vehicle-side mounting hardware is supplied. Confirm hardware requirements before installation.

The Under The Hood keychain/lanyard appearing in some display photographs is a separate promotional item and is not part of the advertised slider pair.

Installation & Safety Guidance

1. Verify the motorcycle's exact generation and identify the intended frame-side mounting point before dismantling any part.
2. Compare the slider bases, hole locations and required stand-off clearances with the motorcycle. Do not fit if the geometry does not match.
3. Identify the correct vehicle-side bolts and spacers from a reliable service reference or qualified technician. Never substitute a bolt based solely on visual similarity.
4. Inspect the original mounting hardware and verify that brake hoses, coolant hoses, wiring, steering travel and fairings remain clear.
5. Use the prescribed tightening procedure for the actual motorcycle mounting point. Incorrect tightening of structural or engine-mount fasteners can cause damage.
6. After installation, check both sides for secure fitment and interference. Reinspect after initial use.

Professional installation recommended. Do not drill, cut, force-align or modify a structural mounting point to install an incompatible kit. Any fall or impact warrants inspection of the sliders, frame mounts and affected motorcycle components before further riding.

Important Limitations & Aftermarket Clarification

This is a Moto Genius-branded aftermarket accessory, not a Yamaha Genuine spare part or an official Yamaha factory accessory. A Yamaha-style emblem visible on the slider cap does not establish Yamaha OEM status, factory approval or a compatibility guarantee.

No claim is made regarding tested impact rating, exact metal alloy, machining process, anodising standard, crash-energy absorption, guaranteed zero damage or suitability for racing. A slider can itself transfer force into a mounting point during an impact. Protection outcomes vary significantly.

For correct selection, inspect the packaging/application, your motorcycle variant, the supplied hardware and the actual mounting points before installation. Items should be checked before fitting in accordance with the store's applicable published policies.

Frequently Asked Questions

1. Is this an original Yamaha accessory?

No. This is an aftermarket Moto Genius-branded frame slider pair. Yamaha-style markings on the outer caps do not mean the product is manufactured or approved by Yamaha.

2. Will these fit the Yamaha R15 V2?

R15 V2 is stated on the product package. Confirm the mounting point, spacer/bolt requirement and motorcycle variant before purchasing or installing.

3. Will these fit the Yamaha R15 V3?

R15 V3 is stated on the product package. Verify the specific mounting arrangement and hardware on your bike.

4. Will these fit the Yamaha MT-15 V1 or V2?

The packaging says MT-15 but does not distinguish every sub-generation. Match the hardware and mounting arrangement for your exact MT-15 variant; do not assume all versions fit.

5. Do these fit the Yamaha R15 V4 or R15M?

Those models are not specified on this particular packaging. Compatibility is not confirmed. Choose a verified R15 V4/R15M-specific kit instead.

6. Is the price for one piece or a pair?

The advertised product is a pair containing two slider assemblies, as shown in the physical box.

7. Is this a front fork slider or wheel axle protector?

No. It is a frame-side slider accessory. Front fork/axle sliders and rear swingarm protectors are different parts.

8. Are installation bolts, spacers and brackets included?

A complete vehicle-specific hardware kit is not established from this package inspection. The slider assemblies and their attached pieces are visible, but additional bike-side fasteners or spacers must be verified before purchase.

9. Can I fit it without cutting the fairing?

No universal no-cut claim is made. Clearance and any fairing-interference concern must be checked for the exact bike before installation. Never force an incompatible mount.

10. Will these sliders prevent all damage in a crash?

No. Sliders may offer a contact point in some low-speed falls or slides, but they do not guarantee protection of the engine, frame, fairings or rider. Impact loads can damage mounting points.

11. What material are the sliders made from?

The supplied items visibly have metallic red bodies and contrasting black end sections. An exact alloy grade, polymer specification or heat-treatment claim has not been established for this package.

12. Are these the same as a full crash guard?

No. This is a compact pair of projecting sliders; a tubular crash guard or multi-point frame protection cage is a different product.

13. Do these fit bikes with aftermarket crash guards or modified fairings?

Additional accessories can obstruct or share mounting points. Check the complete arrangement and clearances with a technician; compatibility is not guaranteed.

14. Is the UTH-branded lanyard included?

No. The Under The Hood lanyard shown alongside the box is not part of the advertised slider pair.

15. How do I check whether I am ordering the correct set?

Confirm the motorcycle generation, examine the box identification R15V2/V3/MT-15 RED, and compare the slider base pattern and required mounting hardware with your actual bike before installation.

Before You Order: Final Checklist

• Bike is a packaging-listed Yamaha R15 V2, R15 V3 or MT-15.
• Exact generation and frame-side mounting points have been checked.
• Required fasteners, spacers and nearby fairing clearances have been confirmed.
• You want the red two-piece frame slider set, not wheel/fork sliders.
• You understand this is aftermarket protection, not an OEM part or damage-free guarantee.