Genuine Throttle Cable Assembly (Twin Cable / Push-Pull) for Royal Enfield Classic 650 – RAL00494/C (OEM Accelerator Cable)

Royal Enfield RAL00494/C is the genuine OEM throttle cable assembly (twin cable / push-pull)—commonly searched as throttle wire / accelerator cable / gas cable for Royal Enfield Classic 650 This is the correct replacement when your throttle feels heavy, doesn’t return smoothly, you notice frayed strands, abnormal free play, or inconsistent throttle response due to worn inner wire or damaged outer sheath.

Twin-cable systems use two cables (open + close) for safer, more controlled throttle operation. That’s why OEM-spec routing, cable length, and end fittings matter—wrong-pattern cables can cause throttle binding at full lock, incorrect free play, or premature wear. Dealer catalogs list this exact part as “THROTTLE CABLE ASSEMBLY, TWIN CABLE” under Royal Enfield spares.

Classic 650 throttle cable, push pull throttle cable, twin throttle wire, RAL00494C.

Before you buy: confirm Classic 650 model and match by VIN / existing cable ends / routing photo at throttle body and twist grip.

Key Features 

• Genuine Royal Enfield part: RAL00494/C

• OEM item name: Throttle Cable Assembly, Twin Cable (Push-Pull)

• Correct length and end fittings to reduce wrong-fit cable binding

• Restores smooth throttle return and proper free play when adjusted correctly

• Ideal replacement for frayed cable, sticky throttle, heavy throttle action

• Twin-cable safety: maintains open/close cable function (not single-cable type)

• Recommended to inspect/clean throttle tube and check routing during install

• Return-prevention support: verify by VIN + connector/end photo before dispatch

Compatibility Table

Variants
No variants.

FAQs 

Q1 (Fitment): How do I confirm RAL00494/C is correct for my Classic 650?
Match any one: (1) your old part number/bill shows RAL00494/C, (2) send VIN for parts confirmation, or (3) share photos of cable ends at throttle grip + throttle body and current routing.

Q2 (Fitment): Is this cable for single-cable throttles?
No. This is a twin (push-pull) throttle cable assembly. If your bike uses a different setup, do not order unless your OEM PN matches RAL00494/C.

Q3 (Comparison): OEM vs aftermarket throttle cable—what’s the real risk?
Aftermarket cables can “fit” but often differ in length, liner quality, and end fittings—leading to heavy throttle, incorrect free play, or binding at full lock. OEM ensures correct spec for safer operation.

Q4 (Installation): Any key precautions during installation?
Route exactly like factory, avoid sharp bends, and adjust free play at the throttle and/or throttle body as per service practice. After install, test full steering lock left/right and ensure the throttle snaps back smoothly.

Q5 (Symptoms): When should I replace my throttle cable?
Heavy or sticky throttle, delayed return, fraying near bends, uneven throttle feel, or free play that won’t hold adjustment.