ROLON Chain & Sprocket Kit – KIT HPOR 218 – R520 O-Ring Chain (110 Links) + 14T/41T Sprockets for Bajaj Pulsar RS200

Restore factory-smooth pickup on your Pulsar RS200 with genuine ROLON KIT HPOR 218.
Includes R520 O-Ring chain (110L) + 14T front + 41T rear sprocket—matched set for correct gearing.

Description 

If your Bajaj Pulsar RS200 has started feeling jerky on throttle, making chain noise, or needing frequent tightening, it’s usually time to replace the entire drive set (chain + both sprockets) as one matched kit. ROLON KIT HPOR 218 is built specifically for RS200 gearing with a 14-tooth front and 41-tooth rear sprocket, paired with an R520 O-Ring chain (110 links) so the chain pitch/length and sprocket profile work together correctly.

The O-Ring sealing helps retain lubrication inside the chain, reducing premature wear and extending service life when maintained properly. This is the right upgrade/replacement if you want smooth acceleration, consistent power delivery, and reduced “tight spot” issues that often happen when only the chain is changed and old sprockets are reused.

Buying from Under The Hood means verified packaging + fitment assistance before dispatch—so you avoid wrong kits and return headaches.

Key Features 

• Exact kit code: ROLON KIT HPOR 218 (matched set for RS200)

• Chain included: R520 O-Ring chain, 110 links

• Front sprocket: 14T (S 02 249) | Mounting: 2 taps on PCD + spline

• Rear sprocket: 41T (S 02 617) | Mounting: 6 holes on PCD + bore

• O-Ring sealing helps reduce friction, noise, and wear (with correct cleaning/lube routine)

• Correct gearing feel: 14/41 ratio maintained (avoid mileage/pickup mismatch from wrong tooth counts)

• Best practice: replace chain + both sprockets together to prevent early chain stretch and skipping

• Ideal for riders facing: chain slack adjustment every few days, vibration on acceleration, uneven tightening spots

Compatibility Table 

Return-prevention check (must do): If your current rear sprocket is not 41T or your chain is not in the 520 series, message us before ordering with a photo of your sprocket/chain stamp.

What’s in the Box

• 1 × ROLON R520 O-Ring Chain – 110 Links

• 1 × Front Sprocket – 14T (S 02 249)

• 1 × Rear Sprocket – 41T (S 02 617)

Installation Notes 

• Install as a full set (do not reuse old sprockets with new chain).

• Ensure rear wheel alignment is correct; misalignment kills chain life fast.

• After installation: ride 10–20 km, re-check slack, then set to spec.

• Use O-Ring safe chain cleaner and quality chain lube; avoid petrol/diesel wash.

Variants

• No variants (single kit: HPOR 218)

FAQs 

Q1. Is KIT HPOR 218 for Pulsar RS200 or NS200?
KIT HPOR 218 is listed for Bajaj Pulsar RS200. For NS200/AS200, the kit code differs—confirm before ordering.

Q2. What are the sprocket tooth counts in HPOR 218?
Front 14T, Rear 41T.

Q3. How many chain links are included?
110 links (R520 O-Ring chain).

Q4. Can I replace only the chain and keep old sprockets?
Not recommended—old sprockets accelerate chain wear and can cause skipping/noise. Best practice is to replace the full set.

Q5. How do I confirm this kit will fit before ordering?
Check your existing rear sprocket tooth count (41T) and chain series marking (520). If unsure, WhatsApp us photos.