• himalayan 411 fuel pump o ring
1 2

Royal Enfield

Royal Enfield 1010088/A — O Ring (DIA 66.60 x 3.50) for Fuel Pump Module / Tank Pump Seal

Royal Enfield 1010088/A — O Ring (DIA 66.60 x 3.50) for Fuel Pump Module / Tank Pump Seal

Rs. 86.00
Rs. 87.00 Rs. 86.00
Sale Sold out
Shipping calculated at checkout.
Important Order Policy
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

Royal Enfield 1010088/A — O Ring (DIA 66.60 x 3.50) for Fuel Pump Module / Tank Pump Seal

Genuine Royal Enfield 1010088/A fuel pump module O-ring (66.60 x 3.50). Fixes fuel seepage and reseals pump plate after service. Verify by VIN/EPC.

Key Features

  • Genuine Royal Enfield part number 1010088/A
  • O-ring size as per RE listing: DIA 66.60 x 3.50
  • Restores fuel-pump module sealing and prevents seepage
  • Use during fuel pump module removal / refit service
  • Helps prevent hard-start caused by air leaks at module flange
  • Low-cost return-prevention part: replace whenever module is opened
  • Install with clean, lint-free surface; avoid twisting the seal

Compatibility

Model Platform/Engine BS/Emission Years Status Notes/Constraints
Bullet 500 (EFI/BS4) UCE 500 EFI BSIV approx 2017–2020 ✅ Confirmed by dealer listings; verify pump module type by photo.
Classic 500 (EFI) UCE 500 EFI BSIV approx 2017–2020 ✅ Confirmed by bike-parts + dealer listing; verify module flange diameter.
Thunderbird X 500 ABS UCE 500 EFI BSIV approx 2018–2020 ✅ Official RE spares portal lists compatibility; confirm ABS variant.
Himalayan 411 / Scram 411 LS410 EFI BS6/Euro4+ approx 2021–2024 ✅ Official listing shows Scram 411; confirm LS410 EFI pump module.
Other RE EFI models Various EFI — — ❓ Unverified. Verify by VIN/EPC and by measuring old O-ring.

Variants

No variants.

FAQs

Q: Is this the same as a paper gasket?
A: No. 1010088/A is an O-ring seal used on fuel pump module/tank flange joints. If your bike uses a paper gasket, this will not replace it.

Q: What problems does a bad fuel pump O-ring cause?
A: Fuel smell or seepage near the tank base, wetness around the pump plate, and sometimes hard starting due to air leaks after refit.

Q: Before I order, what should I match?
A: Match the part number from your EPC/VIN or compare your old seal diameter and thickness (66.60 x 3.50) and the pump module flange style.

Q: Does it include multiple rings?
A: No. This SKU is a single O-ring unless your packaging explicitly shows a set. Order quantity as required.

Q: Can I reuse the old O-ring?
A: Not recommended. Once compressed, the seal often does not reseal reliably; replacing it is cheaper than a leak/return.

Q: Return-prevention: why might this not fit my bike even if it is a 500cc?
A: Fuel pump modules vary by model and year. Always verify by VIN/EPC or by matching the old seal dimensions and flange design.

 

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details