Royal Enfield 1040081/A – Hose Clip for Himalayan 411 BS4 (EVAP & Fuel/Vacuum Hoses) – Genuine OEM

Royal Enfield 1040081/A – Hose-Clip is the genuine OEM hose clamp used on the Himalayan 411 BS4, primarily in the EVAP (evaporative emissions) system and related fuel / purge / vacuum hoses. It secures small-diameter rubber hoses to nipples and fittings so they stay leak-free under heat, vibration and off-road use.

The official BS IV Himalayan parts catalogue lists 1040081/A – HOSE-CLIP in the EVAP system diagram (key item 10), alongside the purge valve and grommet. A Royal Enfield “fast moving parts for retailers” sheet describes “1040081/A Hose-clip Himalayan BS IV”, confirming it as a Himalayan-specific small hose clamp.

European OEM portals such as Bike-Parts-RoyalEnfield and royalenfield-pieces.fr list 1040081/A as a genuine “HOSE-CLIP / CLIP DURITE”, identical to the clip installed at the factory. Indian distributor price lists record 1040081/A – Hose-clip with the correct HSN code, proving it’s an official Royal Enfield spare and not a generic hardware item.

Use this part whenever an original clamp is lost, rusted, bent or weakened, especially around the EVAP purge valve, charcoal canister lines or fuel vapour hoses. Unlike random “jugaad” clamps, this OEM clip has the exact inner diameter and clamping tension designed for Himalayan BS4 hose sizes, reducing the risk of fuel vapour leaks, EVAP errors, or hoses popping off on rough roads.

Sold per piece (1N).

Key Features

• Genuine Royal Enfield OEM hose clip – part no. 1040081/A, described in official lists simply as “Hose-clip”.

• Specifically referenced as “Hose-clip Himalayan BS IV” in RE fast-moving parts sheets.

• Used in the BS4 Himalayan EVAP system for purge valve and associated hoses (EVAP parts diagram, item 10).

• Correct diameter and clamping force for small fuel / vapour / vacuum hoses on Himalayan 411 – avoids over-crushing or loose fit vs generic clamps.

• OEM-quality spring tension and corrosion resistance, designed to survive heat cycles, rain and off-road vibration.

• Ensures proper sealing of EVAP lines, helping prevent fuel smell, leaks or hose blow-off.

• Direct replacement – slips over existing hoses and barbs without modification.

• Small, low-cost part that can save big EVAP diagnosis headaches by keeping the system airtight.

• Supplied as single piece (1N); multiple clips are used per bike (refer to parts diagram for qty).

Compatibility Table 

Variants

This listing covers:

• Part Number: 1040081/A

• Description: Hose-clip / Hose clamp (small)

• Finish: Standard OE metal clip

• Quantity: 1 piece (multiple required per bike)

No LH/RH or colour variants; suffix /A is the current Royal Enfield revision.

FAQs

Q1. Where is hose clip 1040081/A used on my Himalayan?
On the BS4 Himalayan 411, 1040081/A is used around the EVAP system hoses – for example near the purge valve and canister connections, as shown in the official EVAP parts diagram (item 10).

Q2. How many of these clips does one Himalayan need?
The Royal Enfield EVAP parts sheet and Hitchcock’s partsbook indicate multiple clips (3–4) per bike are used in that subassembly. This listing is per piece (1N), so order as many as needed based on the diagram or what you’re replacing.

Q3. Can I use 1040081/A on other models as a universal clamp?
Physically, it’s a small metal hose clip that can fit similar hose sizes, but Royal Enfield documents explicitly map Himalayan BS4 only. For any other bike, treat it as universal / ❓ not confirmed and check diameter before ordering.

Q4. Is this clip better than generic hardware-store clamps?
Yes. This is an OEM clamp with the correct inner diameter and spring tension for Himalayan hoses, designed to seal without over-compressing or cutting into the rubber. Generic worm-drive clamps are bulkier, can damage the hose, and often don’t fit tightly in tight EVAP spaces.

Q5. Is this a genuine part or aftermarket?
All referenced sources (Bike-Parts-RoyalEnfield, royalenfield-pieces.fr, official price lists) list 1040081/A as a genuine Royal Enfield hose clip, the same as fitted at the factory.