Royal Enfield Seat Rubber Support 1100199/C for Classic 350 Reborn, Meteor 350 & Bullet 350 J-Series

Genuine Royal Enfield part number 1100199/C, factory description RUBBER SUPPORT-SEAT. This small seat-support rubber is used at specific contact/support points in the original seat assembly. It is sold per piece.

Important: Royal Enfield seat assemblies can use several different rubber supports that look similar and may carry the same generic description. Order this part only when the motorcycle's parts catalogue, existing part identification, or dealer EPC specifies 1100199 / 1100199/C at the required seat position.

What This Product Is

• Genuine Royal Enfield seat rubber support / seat buffer.
• OEM/factory description: RUBBER SUPPORT-SEAT.
• Exact SKU supplied: 1100199/C.
• A small rubber support used within the seat assembly at catalogue-specified locations.
• Sold as 1 piece; order the quantity shown for the required position in your motorcycle's EPC.

What This Product Is Not

• Not a complete rider seat or pillion seat.
• Not seat foam, seat rexine/cover, seat pan, seat bracket, grab rail or mounting hardware.
• Not the separate RUBBER-SEAT MOUNT used at other positions.
• Not automatically interchangeable with 1100196/A, 1100197/C, 1100221/C, 1100222/B, RAU00047 or other seat-support rubbers.
• Not a universal Royal Enfield seat rubber.

Key Features

• Genuine Royal Enfield OEM spare part.
• Exact part-number targeting for accurate replacement: 1100199/C.
• Used in verified Royal Enfield J-Series seat assemblies.
• Direct replacement only where the original parts catalogue specifies this exact number.
• Useful for replacing a missing, torn, cracked, hardened or permanently compressed original support.

Buyer Search Names / Internal Search Keywords

Royal Enfield seat rubber, seat support rubber, seat rubber support, seat buffer, seat rubber buffer, under-seat rubber, rubber support seat, 1100199/C, 1100199C, 1100199, Classic 350 Reborn seat rubber, Classic 350 J-Series seat rubber, Meteor 350 seat rubber, Bullet 350 J-Series seat rubber.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Not Compatible / Do Not Order For

• Hunter 350: the checked Hunter seat assembly uses different rubber-support part numbers; do not substitute 1100199/C unless a later exact EPC specifically calls for it.
• Classic 350 UCE / Bullet 350 UCE / Electra UCE: these are different generations. Do not order from this J-Series listing unless the exact old part or parts catalogue independently confirms 1100199/C.
• Do not order for 650 models, Himalayan/Scram, Thunderbird or other Royal Enfield motorcycles merely because the part looks similar.

Part Number / Supersession Notes

• Exact current SKU used for this listing: 1100199/C.
• Parts-book diagrams may display the base number 1100199 without the suffix.
• Older material lists can also show 1100199/B. This listing does not claim /B and /C are interchangeable unless the motorcycle's EPC/dealer system confirms the replacement.

Similar Parts Comparison

When Should This Be Replaced?

• The original support is missing.
• The rubber is torn, split or visibly damaged.
• It has become hard, badly flattened or permanently compressed.
• The seat has abnormal movement/contact and inspection confirms this exact support is worn or absent.

Seat looseness or noise can have several causes. Confirm the actual failed component before ordering.

Recommended Related Parts to Check

• Other seat support rubbers shown in the same motorcycle's EPC.
• Seat-mount rubbers and sleeves.
• Seat mounting bracket and fasteners.
• Rider/pillion seat pan mounting points.
• Grab rail supports where applicable.

What's in the Box

• 1 × Genuine Royal Enfield RUBBER SUPPORT-SEAT — 1100199/C.

No seat, bracket, bolt, sleeve, grab rail or other rubber support is included.

Installation Notes

1. Remove the seat using the motorcycle's correct service procedure.
2. Locate the exact EPC position corresponding to 1100199/C.
3. Compare the replacement with the removed original before installation.
4. Install it in the same orientation/location as the original support.
5. Refit the seat and confirm that it locks/sits correctly without trapped or displaced hardware.

If the seat layout is unfamiliar, have the part installed or verified by a competent technician.

Return-Prevention Note

Please confirm part number 1100199/C and the exact seat-diagram position before ordering. Multiple Royal Enfield rubbers share the description “RUBBER SUPPORT-SEAT” but are different parts. This product is sold per piece; required quantity is determined by the exact motorcycle/seat EPC.

Important Order Policy: Please order only after confirming the part number, model, variant, year and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours.

FAQs

What is Royal Enfield 1100199/C?

It is a genuine Royal Enfield RUBBER SUPPORT-SEAT, commonly searched as a seat rubber support, seat buffer or under-seat rubber.

Which bikes are confirmed for 1100199/C?

Verified seat catalogues show 1100199 on the Meteor 350, Classic 350 Reborn/J-Series and Bullet 350 J-Series. Always match the exact motorcycle and seat diagram before ordering.

Does it fit the Hunter 350?

Do not order it for Hunter 350 based on appearance. The checked Hunter seat fiche uses different rubber-support part numbers.

How many pieces do I need?

This listing is for one piece. Verified Meteor 350 and Bullet 350 J-Series seat positions commonly specify 2 pieces. Classic 350 Reborn seat diagrams can use 1100199 in different positions/quantities depending on specification, so order from the exact EPC.

Is 1100199/C the same as 1100196/A or 1100197/C?

No interchangeability is claimed. They share a similar factory description but are separate part numbers used at different seat positions.

Is 1100199/B the same as 1100199/C?

Older lists can show /B, while current references identify /C. Do not assume supersession or interchangeability unless the exact dealer EPC confirms it for the motorcycle.

Will this fix a loose or rattling seat?

It can help only when this exact rubber support is missing, worn or damaged. Seat movement can also come from other rubbers, mounts, brackets, latches or fasteners, so inspect the seat assembly first.

Is this a genuine Royal Enfield part?

Yes. This listing is for genuine Royal Enfield part number 1100199/C.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, 1100199/C, 1100199C, 1100199, RUBBER SUPPORT-SEAT, Seat Rubber Support, Seat Support Rubber, Seat Rubber, Seat Buffer, Seat Rubber Buffer, Classic 350 Reborn, Classic 350 J-Series, Meteor 350, Bullet 350 J-Series, Royal Enfield Seat Parts, J-Series Seat Parts.

Image Alt Text

• Genuine Royal Enfield 1100199/C seat rubber support
• Royal Enfield Classic 350 Reborn seat rubber support 1100199/C
• Royal Enfield Meteor 350 seat rubber support 1100199/C
• Royal Enfield Bullet 350 J-Series seat rubber 1100199/C