1 0

    Royal Enfield

    Royal Enfield Classic 350 Reborn / Bullet 350 J-Series Grab Rail Sleeve 1100216/E

    Royal Enfield Classic 350 Reborn / Bullet 350 J-Series Grab Rail Sleeve 1100216/E

    Rs. 0.00
    Rs. 0.00
    Sale Sold out
    Shipping calculated at checkout.

    Out of stock

     We will notify you once product becomes available.
    Important Order Policy
    Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

    Royal Enfield Classic 350 Reborn / Bullet 350 J-Series Grab Rail Sleeve 1100216/E

    Genuine Royal Enfield part number 1100216/E, factory description SLEEVE-GRABRAIL. This is a small mounting sleeve/spacer used at a specified point in the seat/grab-rail assembly on catalogue-confirmed Royal Enfield Classic 350 Reborn and Bullet 350 J-Series applications.

    Sold per piece. The verified seat/grab-rail fiches for both confirmed applications specify 2 pieces at the 1100216 position.

    Important: Royal Enfield uses more than one sleeve, rubber support and fixing component around the grab rail. Do not order this part only by appearance. Match the exact number 1100216 / 1100216/E in the motorcycle's EPC.

    What This Product Is

    • Genuine Royal Enfield grab-rail mounting sleeve.
    • Exact current SKU: 1100216/E.
    • Factory description: SLEEVE-GRABRAIL.
    • A small spacer/sleeve used within the seat and grab-rail mounting arrangement.
    • Confirmed for selected Classic 350 Reborn and Bullet 350 J-Series seat/grab-rail assemblies.
    • Sold as 1 piece.

    What This Product Is Not

    • Not the complete grab rail.
    • Not a grab-rail rubber support.
    • Not the seat rubber support.
    • Not a seat mounting bolt.
    • Not the separate RAU00105 grab-rail sleeve.
    • Not a pillion seat or rider seat component assembly.
    • Not a universal Royal Enfield spacer or bush.

    Key Features

    • Genuine Royal Enfield OEM mounting hardware.
    • Exact part-number targeting: 1100216/E.
    • Catalogue-listed in seat/grab-rail assemblies.
    • Useful when the original sleeve is missing, damaged, corroded or lost during seat/grab-rail removal.
    • Helps maintain the original mounting stack where this exact sleeve is specified.
    • Part-number-specific listing reduces confusion with nearby grab-rail sleeves and rubber supports.

    Buyer Search Names / Internal Search Keywords

    1100216/E, 1100216E, 1100216, Royal Enfield grab rail sleeve, grabrail sleeve, grab rail spacer, grabrail spacer, grab rail bush, grab rail collar, seat grab rail spacer, Classic 350 Reborn grab rail sleeve, Classic 350 J-Series grabrail spacer, Bullet 350 J-Series grab rail sleeve, new Bullet 350 grabrail spacer.

    Confirmed Compatibility

    Motorcycle Generation Status Verified Quantity Fitment Note
    Royal Enfield Classic 350 Reborn / All New Classic 350 J-Series / Euro 5 / BS6 Confirmed 2 pcs Classic 350 seat assembly fiches list 1100216 as SLEEVE-GRABRAIL, normal quantity 2.
    Royal Enfield Bullet 350 J-Series / New Bullet 350 2023-on J-Series / Euro 5+ Confirmed 2 pcs Bullet 350 seat fiche lists 1100216/E in the grab-rail mounting group, with 2 used in the assembly.

    Fitment Not Confirmed / Check Before Ordering

    Application Guidance
    Meteor 350 Do not assume compatibility merely because nearby J-Series hardware may look similar. Exact 1100216/E application was not strong enough to include as confirmed fitment.
    Goan Classic 350 Do not assume compatibility from the Classic name. Match the exact seat/grab-rail EPC first.
    Accessory / touring seat or backrest assemblies Accessory mounting hardware can differ from the standard production grab rail. Verify the accessory-specific parts diagram.
    Modified or aftermarket grab rails Confirm the actual mounting hardware installed on the motorcycle.

    Not Compatible / Do Not Order For

    • Classic 350 UCE / Bullet 350 UCE / Electra UCE: different chassis and seat/grab-rail generation.
    • Hunter 350: different rear seat/grab-handle arrangement; no fitment claim is made.
    • Himalayan 411 / Scram 411 / Himalayan 450 / Guerrilla 450: different seat and rear-frame hardware.
    • Interceptor 650 / Continental GT 650 / Super Meteor 650 / Shotgun 650 / Classic 650 / Bear 650: no compatibility is claimed.

    Part Number / Supersession Notes

    • Exact current SKU: 1100216/E.
    • Parts diagrams often show the base number 1100216 without the suffix.
    • Older material-code lists contain 1100216/C and 1100216/D as well as /E.
    • This listing does not claim automatic /C or /D to /E interchangeability unless the exact dealer EPC confirms the replacement for the motorcycle.

    Similar / Adjacent Parts Comparison

    Part Number Description Difference
    1100216/E SLEEVE-GRABRAIL This product.
    RAU00105 SLEEVE-GRABRAIL Separate grab-rail sleeve used at another position in the same/related seat assemblies. Do not interchange by description alone.
    1100215 RUBBER SUPPORT-GRABRAIL Rubber support; not this sleeve.
    RAU00048 RUBBER SUPPORT GRABRAIL Another separate rubber support in the grab-rail assembly.
    1100199 RUBBER SUPPORT-SEAT Seat support rubber, not a grab-rail sleeve.
    594215 HEX SOCKET HEAD SCREW / grab-rail fixing screw Separate fixing hardware used in later seat/grab-rail assemblies.

    When Should This Be Replaced?

    • The original sleeve is missing.
    • It was lost during seat or grab-rail removal.
    • The sleeve is bent, crushed or visibly damaged.
    • It is excessively corroded.
    • The grab-rail mounting stack has been incorrectly assembled and the EPC confirms this sleeve is required.

    Grab-rail looseness can also be caused by loose screws, damaged threads, worn rubber supports, incorrect spacers or a damaged grab rail. Inspect the complete mounting arrangement before ordering parts.

    Recommended Related Parts to Check

    • 1100215 grab-rail rubber support.
    • RAU00105 grab-rail sleeve.
    • RAU00048 grab-rail rubber support.
    • Model-specific grab rail assembly.
    • 594215 grab-rail fixing screws where specified.
    • Seat-support rubbers around the same mounting area.

    What's in the Box

    • 1 × Genuine Royal Enfield SLEEVE-GRABRAIL — 1100216/E

    Quantity note: the verified Classic 350 Reborn and Bullet 350 J-Series assemblies use 2 pieces at the 1100216 position. This listing supplies one piece per quantity purchased.

    Installation Notes

    1. Remove the seat/grab rail using the correct model-specific procedure.
    2. Refer to the exact seat/grab-rail parts diagram.
    3. Identify the 1100216 sleeve position before fitting.
    4. Do not confuse it with the separate RAU00105 sleeve or nearby rubber supports.
    5. Reassemble all sleeves, rubbers and fixing screws in their original order and position.
    6. Tighten the grab-rail mounting hardware to the correct workshop specification.

    Return-Prevention Note

    Confirm 1100216/E before ordering. Several nearby Royal Enfield grab-rail parts share similar names and shapes. This part is the sleeve only; it is not the grab rail, rubber support or mounting screw.

    For the verified Classic 350 Reborn and Bullet 350 J-Series applications, the EPC shows 2 pieces. This product is sold individually.

    Please order only after confirming the part number, model, generation, year and exact EPC position. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, fitment mismatch, mechanic recommendation or change of mind. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours.

    FAQs

    What is Royal Enfield 1100216/E?

    It is a genuine Royal Enfield SLEEVE-GRABRAIL, used as part of the grab-rail mounting hardware.

    Does 1100216/E fit Classic 350 Reborn?

    Yes. Classic 350 Reborn / All New Classic 350 seat fiches list base code 1100216 as SLEEVE-GRABRAIL with a normal quantity of 2.

    Does it fit Bullet 350 J-Series?

    Yes. Bullet 350 J-Series seat fiches list 1100216/E in the grab-rail mounting assembly, with 2 used.

    How many pieces do I need?

    The verified Classic 350 Reborn and Bullet 350 J-Series seat/grab-rail assemblies specify 2 pieces. This listing is sold per piece.

    Does it fit Meteor 350?

    No fitment claim is made here because exact 1100216/E Meteor 350 evidence was not strong enough to meet the strict compatibility standard. Check the motorcycle's own EPC before ordering.

    Is this the complete grab rail?

    No. This is only the grab-rail sleeve/spacer.

    Is 1100216/E the same as RAU00105?

    No. Both may be described as SLEEVE-GRABRAIL, but the parts diagrams list them as separate part numbers at separate positions.

    Is this a rubber bush?

    The official description is SLEEVE-GRABRAIL. Do not substitute it for the separately catalogued rubber supports.

    Are the mounting screws included?

    No mounting screws are claimed as included. Buy the exact model-specific fixing hardware separately if required.

    Is this genuine Royal Enfield?

    Yes. This listing is for genuine Royal Enfield part number 1100216/E.

    SEO Tags

    Royal Enfield, Genuine Royal Enfield Parts, 1100216/E, 1100216E, 1100216, SLEEVE-GRABRAIL, Grab Rail Sleeve, Grabrail Sleeve, Grab Rail Spacer, Grabrail Spacer, Grab Rail Bush, Grab Rail Collar, Classic 350 Reborn, Classic 350 J-Series, All New Classic 350, Bullet 350 J-Series, New Bullet 350, Royal Enfield Seat Parts, Royal Enfield Grab Rail Parts.

    Image Alt Text Suggestions

    • Genuine Royal Enfield 1100216/E grab rail sleeve
    • Royal Enfield Classic 350 Reborn grab rail spacer 1100216/E
    • Royal Enfield Bullet 350 J-Series grab rail sleeve 1100216/E
    • Royal Enfield 1100216/E seat grab rail mounting sleeve

    Verify Fitment on Official Brand Portals

    For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

    Royal Enfield Official Spares Portal

    Hero MotoCorp Official eCatalogue

    View full details

    Become a Dealer Partner

    We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.

    100% Genuine OEM Parts
    Dedicated Account Manager
    Next-Day Dispatch
    Exclusive Dealer Pricing