Royal Enfield 1100693 / 1100693B – Genuine ABS Wheel Speed Sensor for Meteor 350, Classic 350 Reborn, Bullet 350, Himalayan 450, Guerrilla 450 & Shotgun 650

Keep your bike’s braking system safe and precise with the Royal Enfield 1100693 / 1100693B Genuine ABS Wheel Speed Sensor — an OEM-grade part engineered for perfect fitment and accurate ABS feedback across multiple models including Meteor 350, Classic 350 Reborn, Bullet 350 (J-Series), Himalayan 450, Guerrilla 450, and Shotgun 650.

This factory-tested sensor constantly monitors your wheel speed and sends real-time data to the ABS control unit, ensuring the system can instantly prevent wheel lockup during sudden braking. A faulty sensor can trigger the ABS warning light or cause erratic braking behavior — replacing it with the genuine 1100693 restores OEM braking safety, accuracy, and stability.

Built with precision magnetic pickup and weather-sealed housing, this sensor resists heat, mud, and vibration. Whether you’re replacing a damaged sensor or upgrading during a brake service, the 1100693 offers plug-and-play compatibility with OEM connectors and mounting points — no modifications required.

Ideal for riders upgrading from worn sensors or workshop professionals maintaining Royal Enfield 450 & 650 series motorcycles.

Key Features:

• ✅ Genuine Royal Enfield OEM Part – ABS Wheel Speed Sensor (Part No. 1100693 / 1100693B).

• ⚙️ Factory Calibrated for Precision – Ensures accurate wheel rotation data to the ABS ECU.

• 🚫 Prevents Wheel Lockup – Restores full ABS braking safety and stability.

• 🔌 Plug-and-Play Fitment – OEM harness connector, no wiring modification needed.

• 🌧️ Weatherproof Design – Resistant to heat, moisture, and debris for long service life.

• 🧩 High-Compatibility Range – Fits Meteor 350, Classic 350 Reborn, Bullet 350, Himalayan 450, Guerrilla 450, and Shotgun 650.

• ⚡ Direct Replacement for Stock Unit – Eliminates ABS warning light and restores proper function.

• 🏍️ Tested Under OEM Standards – Matches factory sensor sensitivity and output voltage.

• 🔧 Easy Installation – Direct bolt-on fit to existing bracket mount.

• 💯 Backed by OEM Reliability – Used in both single-channel and dual-channel ABS setups depending on model.

Compatibility Table :

CHECK PART NUMBER TO CONFIRM COMPATABALITY WITH YOUR BIKE

Variants / Supply Information:

• Part Number: 1100693 / 1100693B

• Type: ABS Wheel Speed Sensor

• Mount Location: Front or rear (depending on model)

• Supplied Quantity: 1 Pc (Single Sensor Unit)

• Connector: OEM 2-pin plug with pre-crimped harness

What’s in the Box:

• 1 × Genuine Royal Enfield ABS Wheel Speed Sensor (1100693 / 1100693B)

• 1 × Protective Packaging Sleeve

• Installation Note & QR-Link to fitment video (if applicable)

Installation Notes:

• Disconnect the battery before replacing the sensor.

• Route the cable along the OEM harness path and secure using factory clips.

• Verify the ABS ring cleanliness and magnet alignment before testing.

• After installation, perform a short brake test to ensure no ABS light appears on the console.

FAQs :

1. What does the 1100693 / 1100693B sensor do?
It monitors wheel rotation speed and sends the signal to the ABS module to prevent wheel lockup during braking.

2. Is this sensor compatible with both front and rear wheels?
Yes, depending on the model — it’s used on the front wheel for Meteor, Classic, and Bullet 350 CHECK PART NUMBER TO CONFIRM COMPATABILITY BEFORE PURCHASE.

3. Can I install it myself?
Yes. It’s a direct plug-and-play replacement requiring basic tools. Just follow standard ABS sensor replacement steps.

4. My ABS light is on — will replacing this fix it?
If the old sensor is faulty, yes. Ensure your ABS ring (tone wheel) and wiring are intact.

5. What’s the difference between 1100693 and 1100693/B?
Both are OEM variants — /B usually denotes the latest revision with minor harness improvements.

6. Does it fit Himalayan 450 and Guerrilla 450?
Yes — verified on Sherpa-engine 450 models. Same connector and mount design.

7. Is it waterproof?
Yes, fully sealed to withstand rain, dirt, and wash cycles.

8. Can it be used on Shotgun 650 or Interceptor 650?
Fits Shotgun 650 officially. Do not use on Interceptor/GT 650 — different harness layout.

9. How do I verify the sensor before ordering?
Check the number “1100693” or “1100693/B” printed on your existing sensor’s cable tag.

10. Will it affect braking feel if replaced?
No — it restores original ABS precision and ensures smoother brake modulation under sudden stops.