Royal Enfield 1120061/A – Hand Grip RH (Throttle Grip with Rotor) for Thunderbird X 350 BS4

Royal Enfield part 1120061/A is the genuine right-hand throttle grip assembly (Hand Grip RH) for Thunderbird X 350 (Thunderbird 350X) BS4 models. Official spare-parts catalogues describe it as “Hand Grip Comp. (with Rotor) Throttle Assembly – 350cc”, meaning the rubber grip and plastic throttle tube come as a single factory unit – exactly what your bike was delivered with from the showroom.

On the Thunderbird X 350, this compact flat handlebar and special grip are a big part of the bike’s “urban custom” feel. Over time, the OE grip wears out, hardens, or gets damaged in a fall, causing hand fatigue, poor throttle return or an uneven feel while riding. Replacing it with a non-genuine grip or local throttle tube often introduces play and sticky throttle action, which can be unsafe.

This 1120061/A Hand Grip RH restores the original Royal Enfield feel – correct outer rubber pattern, internal rotor dimensions and cable cam profile – so the throttle rotates smoothly and snaps back correctly when you release it. Sourced from official Royal Enfield channels, it is ideal both for workshops and Thunderbird X 350 owners who want a direct plug-and-play replacement with zero guesswork.

🔎 This is a right-side throttle grip only. For the left grip use part 1120060/A, or a complete pair via grip set KAB00024/A (sold separately).

Key Features

• Genuine Royal Enfield part 1120061/A – Hand Grip RH (throttle side)

• Official catalog description: “Hand Grip Comp. (with Rotor) Throttle Assembly – 350cc” for Thunderbird X 350

• Includes rubber grip + built-in throttle tube/rotor – no need to reuse worn plastic tubes

• Correct inner cam profile and length for smooth throttle rotation and proper cable pull

• Designed specifically for the flat, wide handlebar of Thunderbird X 350 (BS4/ABS)

• Direct bolt-on to the stock handlebar and switch module – no cutting or modification

• OEM rubber compound for good grip, vibration damping and long life

• Perfect replacement after crash damage, grip tearing, or sticky throttle issues

• Supplied new in Royal Enfield–labelled packaging with MRP and part number for authenticity

Compatibility Table

(Only models confirmed from official catalogues – no guesswork)

❗ Exclusions: Thunderbird X 500 (uses 1120062/A), standard Thunderbird 350/500, Classic/Bullet/Electra UCE, J-Series (Classic Reborn/Bullet 350 J/Meteor), Himalayan/Scram and 650 Twins are not confirmed with this part number. If your model is different, please share VIN/chassis for a fiche check.

Variants

• This Listing:

  • Part Number: 1120061/A

  • Description: Hand Grip RH (Throttle grip with rotor) – Thunderbird X 350

• Related Parts (not included, for cross-sell):

  • 1120060/A – Hand Grip LH (left side)

  • KAB00024/A – Hand Grip Set (pair) – generic RE, check fiche for your model

FAQs

1. Will 1120061/A fit my standard Thunderbird 350 or Thunderbird 500?
This part is explicitly listed for Thunderbird X 350 (350X) BS4 in the official exclusive parts catalogue. Standard Thunderbird 350/500 use different throttle grip assemblies, so we do not recommend using 1120061/A on them unless confirmed via VIN and microfiche.

2. Does this grip include the throttle tube or only the rubber?
It is a complete throttle grip assembly – rubber outer grip moulded over an internal rotor/throttle tube, as described in the catalogue (“Hand Grip Comp. (with Rotor) Throttle Assembly”).

3. Do I need to change the left-hand grip as well?
Not compulsory. If only your throttle grip is damaged, you can replace just 1120061/A. However, for a uniform feel and fresh rubber on both sides, many owners replace 1120060/A (LH) at the same time.

4. Is 1120061/A compatible with BS6 or X-series replacement models?
Thunderbird X 350 itself was a BS4-era model (2018–2020) and is now discontinued. Later Meteor/Classic Reborn etc. use different handlebars and grips. Use this part only for Thunderbird 350X unless an official RE fiche for your VIN confirms otherwise.

5. How do I know if my bike already has this part number?
Check your existing throttle grip for the RE casting/printing code, or share your VIN + model (Thunderbird 350X) with us – we’ll verify against the Royal Enfield microfiche before you order, to avoid returns.