UNDER THE HOOD
Royal Enfield Electra 4S/5S Throttle Cable Refresh Electra 145713/B
Royal Enfield Electra 4S/5S Throttle Cable Refresh Electra 145713/B
5.0 / 5.0
(1) 1 total reviews
Couldn't load pickup availability
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy
Royal Enfield 145713/B Throttle Cable - Refresh Electra is a genuine Royal Enfield accelerator / throttle cable for old Electra 4S / Electra 5S KS and ES catalogue applications where the exact part number 145713/B or base number 145713 is specified.
This cable is commonly searched as 145713, 145713/B, 145713-B, Throttle Cable Refresh Electra, Electra accelerator cable or Electra throttle wire. It should be ordered only when the old cable, packet label, repair estimate or parts catalogue confirms this part number.
This is not a universal Royal Enfield throttle cable. Cable length, bend type, adjuster position, carburettor/throttle-end fitting and handlebar routing can change between old Bullet, Electra, Standard, Machismo, UCE, EFI and J-Series models.
What This Product Is
- Genuine Royal Enfield spare part
- Verified full part number: 145713/B
- Base/search part number: 145713
- Description: Throttle Cable - Refresh Electra
- Common buyer name: Accelerator cable / throttle wire
- For old Electra 4S / Electra 5S applications where this exact cable is specified
- Used to connect the throttle grip to the carburettor/throttle mechanism on compatible old-model motorcycles
What This Product Is Not
- Not a clutch cable
- Not a speedometer cable
- Not a brake cable
- Not a choke cable
- Not a throttle tube / accelerator grip
- Not a carburettor or throttle body part
- Not a universal cable for all Bullet, Classic, Electra or Royal Enfield models
- Not for Classic 350 Reborn, Bullet 350 J-Series, Meteor, Hunter, Himalayan, 450 or 650 models unless exact EPC confirms 145713/B
- Not to be selected by cable appearance or approximate length alone
Key Features
- Original Royal Enfield part number 145713/B
- Factory description: Throttle Cable - Refresh Electra
- Old Electra 4S / 5S KS/ES application focus
- Designed for correct throttle operation where this cable is specified
- Useful for replacing a stiff, frayed, snapped, stretched or corroded throttle cable
- Strong return-prevention notes to avoid confusion with clutch cable, speedometer cable and newer-model throttle cables
Buyer Search Names / Internal Search Keywords
Royal Enfield 145713, 145713/B, 145713-B, throttle cable refresh Electra, Electra throttle cable, Electra accelerator cable, Electra 4S throttle cable, Electra 5S throttle cable, Electra KS throttle cable, Electra ES throttle cable, old Royal Enfield throttle wire, accelerator wire, old Electra cable.
Confirmed Compatibility
| Application / Model Family | Part Location / Use | Status | Important Note |
|---|---|---|---|
| Electra 4S-KS (2005) | Throttle / accelerator cable | Confirmed by model-list reference | Use where old cable, EPC, repair estimate or packet label confirms 145713/B. |
| Electra 4S-ES (2005) | Throttle / accelerator cable | Confirmed by model-list reference | Match cable routing, bend type and end fittings before dispatch. |
| Electra 5S-KS (2005) | Throttle / accelerator cable | Confirmed by model-list reference | Use only for catalogue-matched applications. |
| Electra 5S-ES (2005) | Throttle / accelerator cable | Confirmed by model-list reference | Check old cable and model generation before dispatch. |
| Applications listing 145713/B | Throttle Cable - Refresh Electra | Confirmed part identity | Exact part-number confirmation is required before dispatch. |
Additional Old-Model References
| Model / Search Requirement | Status | Important Note |
| Old Bullet Standard 350 / 500 5-speed | Check before dispatch | Some seller references mention Standard 350/500 5-speed, but final sale should match old cable and EPC. |
| Machismo old-model applications | Check before dispatch | Some seller references mention Machismo; verify cable length, bend and end fittings before dispatch. |
| Electra UCE / later Electra variants | Check before dispatch | Do not assume all Electra models use the same throttle cable. |
High-Risk Confusion: Do Not Mix Up
| Customer Search / Requirement | Status for 145713/B | Why It Matters |
| Clutch cable | Not this part | Clutch cables use different part numbers, routing and end fittings. |
| Speedometer cable | Not this part | Speedometer cable is a separate mechanical cable. |
| Choke cable / starter cable | Not this part | Throttle cable and choke cable are not interchangeable. |
| Classic 350 / Classic 500 UCE | Do not assume | Classic UCE throttle cable fitment must be checked by EPC and old cable number. |
| Bullet 350 UCE KS/ES | Do not assume | Bullet UCE cable routing and cable references can differ; match by part number. |
| Classic 350 Reborn / Bullet 350 J-Series / Meteor / Hunter | Not compatible unless EPC confirms | J-Series models use different throttle cable/throttle-body part families. |
| Himalayan / Scram / 450 / 650 models | Do not assume | Different engine, throttle body/carburettor setup and cable routing. |
| Customer selecting by length only | Do not dispatch without confirmation | Approximate length alone is not enough; bend type and cable ends must match. |
Similar Parts Comparison
| Part / Search Term | Description | Order When |
| 145713/B | Throttle Cable - Refresh Electra | Old Electra 4S/5S throttle cable is required. |
| 145713 | Base/search number for same throttle cable family | Customer searches without suffix or old packet shows base number. |
| 145713-B | Hyphenated search version | Marketplace/customer search uses hyphenated part format. |
| Clutch cable | Clutch lever to clutch mechanism cable | Customer reports clutch lever/cable issue. |
| Speedometer cable | Speedometer drive cable | Customer reports speedometer not working on cable-type models. |
| J-Series throttle cable | Newer 350 platform cable | Classic Reborn/Meteor/Hunter/new Bullet requires its own exact part number. |
When Should This Be Replaced?
- Throttle cable is frayed, snapped, rusted or stretched
- Throttle action feels heavy or does not return smoothly after diagnosis
- Outer cable sleeve is cracked, kinked or damaged
- Cable end fitting is worn or damaged
- Old cable has been routed incorrectly or modified
- Old part / EPC / repair estimate confirms 145713/B
Recommended Related Parts to Check
- Throttle grip / throttle tube condition
- Carburettor/throttle linkage movement
- Throttle cable adjuster and lock nut
- Handlebar routing and cable bend points
- Clutch cable only if the customer is servicing all control cables together
- Carburettor top cap / throttle slide area if cable end is damaged
What’s in the Box
- 1 genuine Royal Enfield 145713/B Throttle Cable - Refresh Electra
- Quantity supplied is one cable unless otherwise mentioned
- Throttle grip, carburettor parts, clamps, adjusters, clutch cable and other control cables are not included unless physically supplied with the packet
Installation Notes
- Compare old cable length, bend type, adjuster position and end fittings before installation.
- Route the cable exactly as per the motorcycle’s original path to avoid tight bends.
- Check throttle free play after fitting.
- Ensure the throttle returns smoothly from full-open to closed position before riding.
- Do not force-fit if the cable end or bend style does not match the old cable.
- Professional installation is recommended for throttle/control-cable work.
Return-Prevention Note
Important: 145713/B is a Throttle Cable - Refresh Electra.
It is not a clutch cable, not a speedometer cable, not a choke cable and not a universal Royal Enfield throttle cable.
Match exact part number, old cable shape, bend type, length, end fittings, routing and motorcycle generation before ordering.
Buyer-Focused FAQs
What is Royal Enfield 145713/B?
145713/B is a genuine Royal Enfield Throttle Cable - Refresh Electra, also searched as an accelerator cable or throttle wire.
Why is the listing using 145713/B if I searched 145713?
145713 is the base/search number, while the verified Royal Enfield reference is 145713/B. Customers may search either format.
Does this fit Electra 4S and Electra 5S?
Yes, Electra 4S-KS, Electra 4S-ES, Electra 5S-KS and Electra 5S-ES are supported in model-list references. Confirm old cable/EPC before dispatch.
Does this fit Standard 350 or Machismo?
Some old-model seller references mention Standard and Machismo applications, but this should be checked by old cable, EPC, cable length and end fittings before dispatch.
Is this a clutch cable?
No. This is a throttle / accelerator cable.
Can it fit Classic 350 Reborn or new Bullet 350?
No fitment is claimed. J-Series motorcycles should be matched by their own exact throttle cable or throttle-body part number.
Can I order by cable length only?
No. Cable length alone is not enough. Bend type, cable ends, adjusters, routing and part number must match.
Share
Verify Fitment on Official Brand Portals
Verify Fitment on Official Brand Portals
For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.
Royal Enfield Official Spares Portal
Hero MotoCorp Official eCatalogue
Become a Dealer Partner
We supply 100% genuine OEM parts to workshops and dealers across India. Our team will reach out within 24 hours.
Best services