Royal Enfield 500712/B Hose Clip Dia 60 (60mm Jubilee Clamp) | Himalayan 411 Euro 4 (LS410) + Bullet 350/500 UCE, Electra 350 UCE, Thunderbird & Machismo

If you’re chasing an OEM-correct, leak-free hose connection on your Royal Enfield, the 500712/B Hose Clip (Dia 60mm) is the genuine factory-style clamp designed to secure larger-diameter rubber hoses to intake/adaptor connections. In the Royal Enfield microfiche, this clamp appears in the Himalayan 410 Euro 4 (LS410 EFI) fuel-injection/adapter hose area as the “Clip Hose – Adaptor”—a critical sealing point where air leaks can cause rough idle, inconsistent fueling, or intake noise. 

Unlike generic clamps that may round-off, deform, or loosen under heat cycles, this OEM-spec clip is sized correctly for a ~60mm application and is intended for long-term durability in engine-bay temperatures and vibration. Dealer catalogues also list the same 60mm hose clip as used across several older Royal Enfield platforms (Thunderbird/Machismo/Bullet UCE families), making it a dependable replacement when you want original fit and correct diameter without trial-and-error sizing. 

Key Features

• Genuine Royal Enfield part: 500712/B (OEM fit and sizing). 

• Diameter application: ~60mm (“HOSE CLIP – DIA 60”). 

• Used in Himalayan 410 Euro 4 (LS410 EFI) microfiche as Clip Hose – Adaptor. 

• Helps prevent intake/adapter air leaks and loose hose joints (common cause of erratic idle/hesitation).

• Ideal replacement for rusted, rounded, or wrong-size aftermarket clamps.

• Compact, workshop-friendly part—quick install with standard screwdriver/nut driver.

• Supersession note: catalogues show 500712/A and 500712/B entries; /B is commonly listed as the current service part. 

Compatibility Table 

PLEASE CHECK PART NUMBER BEFORE PURCHASE

Variants

• No functional variants (single clamp).

• Superseded/related part numbers: 500712/A → 500712/B (catalogues show both; sell /B as the current replacement). 

FAQs 

Q1. What is 500712/B used for?
It is an OEM 60mm hose clip used to clamp a larger hose to an adaptor/connection. In the Himalayan Euro 4 microfiche it is listed as “Clip Hose – Adaptor” in the EFI hose area. 

Q2. Is this a universal hose clamp?
It’s a standard clamp type, but the key is correct diameter and OEM fit—this is the genuine RE part sized for the specified application (Dia 60). 

Q3. Difference between 500712/A and 500712/B?
Dealer catalogues show 500712/A with “see replacement” style references and list 500712/B as the current 60mm hose clip. In practice, /B is the service replacement you should stock/sell. 

Q4. Will it fit Bullet/Thunderbird/Electra UCE models?
Dealer sources list it for those families, but year/variant detail isn’t provided—confirm by measuring your existing clamp/hose OD (around 60mm) or share chassis/VIN for verification.