• Royal Enfield 587820/C wind shield – Himalayan 411 clear screen
  • Stock clear windscreen 587820/C mounted on Royal Enfield Himalayan
  • Himalayan 411 OEM windshield 587820C with pre-drilled holes
1 6

UNDER THE HOOD

Royal Enfield 587820/C – Wind Shield (Standard Clear Screen) for Himalayan 411 (BS3/BS4/BS6) – Genuine OEM

Royal Enfield 587820/C – Wind Shield (Standard Clear Screen) for Himalayan 411 (BS3/BS4/BS6) – Genuine OEM

Rs. 500.00
Rs. 507.00 Rs. 500.00
Sale Sold out
Shipping calculated at checkout.
Important Order Policy
Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

Restore your Himalayan’s protection and factory look with the genuine Royal Enfield 587820/C Wind Shield. This is the stock clear screen supplied on the Himalayan 411 and shown as “WIND SHIELD – 587820/C” in parts catalogs. It’s moulded to OE curvature and hole spacing, so it bolts straight onto the existing top bracket without drilling or shims, and it resists common riding chemicals and UV haze better than low-cost acrylic copies. 

Fitment is confirmed for the Royal Enfield Himalayan 411 (BS3/BS4/BS6 years). Multiple reputable dealer/retail sources list 587820/C specifically for the Himalayan windscreen, and the Hitchcock’s parts book maps 587820 on the “Top Bracket & Windscreen” page for Himalayan (2018–2024). We intentionally exclude other models (e.g., Scram 411, Himalayan 450) to minimise returns because their screen/bracket geometry differs. 

Use this screen to replace a cracked/hazed shield or to revert from aftermarket screens to stock airflow and vibration control. Includes the shield only; reuse your OE fasteners and top bracket or order them separately per your VIN.

Key Features

  • Genuine OEM Himalayan wind shield — part no. 587820/C (standard clear). 

  • Direct bolt-on with pre-drilled holes to the OE top bracket; no mods. 

  • OE material spec: scratch/impact and chemical resistant; UV stable.

  • Restores stock airflow and cockpit protection; reduces buffeting vs. misaligned copies.

  • Dealer & fiche verified; avoids fitment guesswork. 

Compatibility Table 

Model Engine / Platform BS/Euro Stage Years
Himalayan 411 LS410 BS3 / BS4 / BS6 2016–2023 (per dealer listings & parts book mapping for Himalayan 2018–2024). 

Exclusions: Scram 411 and Himalayan 450 (Sherpa 450) use different screen/bracket sets — not listed for 587820/C.

Variants

  • 587820/C – Wind Shield (clear) – this listing. (Order mounting top bracket & hardware separately if needed, per your VIN/fiche.)

FAQs

Q1. Is 587820/C an original Royal Enfield part?
Yes—listed as WIND SHIELD 587820/C on OE parts portals and dealer sites. 

Q2. Will it fit Scram 411 or Himalayan 450?
No confirmed fitment. Their brackets and profiles differ; use the model-specific screen.

Q3. What hardware is included?
Shield only. Reuse your OE bolts/spacers or order the OE fasteners/top bracket shown on the “Top Bracket & Windscreen” fiche page. 

Q4. Is this the tinted/tall touring version?
No—this is the standard clear Himalayan screen as per part 587820/C.

Verify Fitment on Official Brand Portals

For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

Royal Enfield Official Spares Portal

Hero MotoCorp Official eCatalogue

View full details