Royal Enfield 593192/C – Flange Shoulder Bolt (Side Stand) | Genuine OEM

Royal Enfield 593192/C is a genuine OEM flange shoulder bolt used on the side stand assembly (“side stand bolt / stand bolt”). It’s a small but critical fastener that supports smooth pivoting and correct alignment of the side stand bracket—especially important if your stand feels loose, binds, squeaks, or has developed play after long use or an impact.

What it is: Flange Shoulder Bolt – Side Stand (OEM)
Confirmed fitment (documented): Listed against Bullet Trials 500 Euro 4 in dealer microfiche mapping; also sold as this same RE part on multiple dealer catalogs.
What to verify before purchase: Because RE uses similar bolts across platforms, match your old bolt + side stand bracket/diagram (or verify via VIN/EPC) before ordering for models not explicitly confirmed below.

If you’re replacing a worn side-stand bolt, consider checking the side stand bracket and spring condition at the same time to reduce repeated wear and prevent returns.

Key Features 

• Genuine Royal Enfield OEM part: 593192/C

• Description: Flange Shoulder Bolt – Side Stand

• Designed for correct pivot support + alignment of the side stand assembly

• Helps reduce play/wobble, binding, and uneven stand movement

• Ideal replacement during side-stand overhaul / bracket service

• Return-prevention: confirm by old bolt match / microfiche / VIN before buying for non-confirmed models

• Sold by multiple dealer catalogs under the same function/name (side stand shoulder bolt)

Compatibility Table

Variants

• Single piece: 593192/C (no verified LH/RH variant for this bolt)

Verified Fitment & Return-Prevention Gate

• You are buying: Royal Enfield 593192/C – Flange Shoulder Bolt (Side Stand).

• ✅ Confirmed in sources for: Bullet Trials 500 Euro 4, Classic 500 Euro 4 (C5), and Classic 350 BSIV.

• Before you order (tick all):

  • ☐ Your old bolt matches shoulder-style + flange form

  • ☐ Your side stand bracket/stand assembly matches your microfiche/VIN lookup

  • ☐ You checked if your bike uses a different side-stand bolt PN

• If any mismatch: do not order—verify using VIN on EPC / spares.royalenfield.com or share photos of old bolt + side-stand bracket.

Exclusions / Not Compatible 

• Thunderbird 350 / 500 (all variants) — NOT confirmed for 593192/C; Thunderbird often uses different fastener part numbers. Verify via VIN/EPC before ordering.

• Any model not explicitly listed as ✅ above: treat as ❓ until verified.

FAQs 

1. What is Royal Enfield 593192/C used for?
   It’s a flange shoulder bolt for the side stand (stand bolt).

2. My side stand is loose / wobbling. Will this bolt fix it?
   If the looseness is from a worn shoulder bolt or elongated mounting point, replacing the bolt can help. Also inspect bracket wear and the stand pivot area.

3. Does 593192/C fit Thunderbird 350/500?
   Not confirmed. Do not assume. Thunderbird commonly uses different hardware PNs—verify via VIN/EPC first.

4. Is this the “side stand pin” / “stand bolt” mechanics talk about?
   Yes—many riders call it stand bolt / pin, but the correct description here is flange shoulder bolt.

5. How do I verify fitment if my model isn’t listed?
   Match your old bolt photo/measurements and confirm via VIN-based EPC or the official spares portal lookup.

6. Is it sold as a kit?
   This listing is for the single bolt (593192/C). If you need bush/stand bracket/spring, order separately.