Royal Enfield 650 Twin Clutch Release Arm – Interceptor, Continental GT, Super Meteor & Shotgun 650 – 575346/F

Genuine Royal Enfield 575346/F is the factory ARM - CLUTCH RELEASE used in the clutch-release mechanism of catalogue-confirmed Royal Enfield 650 Twin motorcycles.

Part Identification

Short Hook

Restore smooth clutch actuation with genuine Royal Enfield 575346/F, the OEM clutch-release arm used in the 650 Twin engine-cover release mechanism.

Detailed Product Description

Royal Enfield 575346/F is the clutch-release arm used within the external/internal clutch operating mechanism of the 648cc Twin engine. It works together with the clutch-release clevis, release bolt, return spring, release shaft, needle bearings, seal and related hardware.

The checked Interceptor 650, Continental GT 650, Super Meteor 650 and Shotgun 650 cover EPCs all list base number 575346 as ARM - CLUTCH RELEASE, quantity 1.

Current genuine-parts databases list several historical suffixes including /A, /B, /C and /F. The newest active suffix observed is 575346/F, while Royal Enfield's February 2026 price list still carries 575346/C. This listing therefore uses /F as the newest verified revision but does not claim blanket interchangeability without packet/VIN confirmation.

What This Product Is

• Genuine Royal Enfield clutch-release arm.
• Part of the mechanical clutch actuation system.
• Used in the engine-cover clutch-release mechanism.
• EPC quantity 1.
• Confirmed by base part number on multiple Royal Enfield 650 Twins.

What This Product Is Not

• Not the clutch lever on the handlebar.
• Not the clutch cable.
• Not the complete clutch assembly.
• Not the clutch-release shaft 575496-series.
• Not the clutch-release clevis 575341-series.
• Not the clutch-release spring 575344-series.
• Not the needle bearings 575380 / 575381.

Key Features

• Genuine Royal Enfield OEM component.
• Correct factory clutch-release geometry where 575346 is specified.
• Works with the release shaft, clevis, spring and bearing stack.
• Useful for repair after wear, bending, seizure or damaged clutch actuation.
• Exact SKU targeting helps distinguish this arm from adjacent clutch-release components.

Buyer Search Names / Internal Search Keywords

575346/F, 575346F, 575346, 575346/C, Royal Enfield clutch release arm, clutch operating arm, clutch actuator arm, clutch release cam arm, Interceptor 650 clutch arm, GT650 clutch release arm, Super Meteor 650 clutch arm, Shotgun 650 clutch actuator.

Confirmed Compatibility

Fitment Not Confirmed / Check Before Ordering

Part Number / Revision Notes

Use 575346/F as the Shopify SKU for this listing. If your physical genuine packet is marked 575346/C, preserve the packet SKU rather than relabelling it as /F without dealer supersession confirmation.

Similar Parts Comparison

When Should This Be Replaced?

• Arm is bent or physically damaged.
• Pivot / contact surface shows excessive wear.
• Clutch release movement is rough after bearings and cable are checked.
• Arm has seized or corroded.
• Clutch-release mechanism was damaged during an accident or improper repair.
• Engine-cover rebuild requires restoration to correct OEM components.

Recommended Related Parts to Check

• 575341/C – Clutch Release Clevis.
• 575342/B – Clutch Release Bolt.
• 575344/D – Clutch Release Arm Spring.
• 575380/B – 21 mm OD Needle Bearing.
• 575381/B – 13 mm OD Needle Bearing.
• 575466-series – Clutch Release Cam Oil Seal.
• 575496-series – Clutch Release Arm Shaft.
• 575540-series – E-Clip Washer.
• Clutch cable and handlebar lever free play.

What’s in the Box

1 × Genuine Royal Enfield 575346/F Clutch Release Arm

Clevis, bolt, spring, shaft, bearings, seals and clips are not included unless physically supplied with the genuine packet.

Installation Notes

1. Confirm the VIN/EPC specifies base 575346 and the applicable suffix.
2. Inspect the release shaft and both needle bearings.
3. Check the return spring and clevis for wear.
4. Renew the release-shaft oil seal if leaking or damaged.
5. Lubricate / assemble only as specified by the Royal Enfield workshop manual.
6. Set clutch-cable free play correctly after assembly.
7. Verify smooth clutch engagement and disengagement before riding.

Return-Prevention Note / Before You Buy

1. Match base part number 575346.
2. Check the genuine packet suffix where available.
3. Do not confuse the arm with the release shaft, clevis or spring.
4. For Classic 650, Bear 650 and Bullet 650, verify the exact EPC before dispatch.
5. If the clutch is heavy, diagnose the cable, bearings, shaft and clutch pack before assuming the arm itself is faulty.

Correctly supplied spare parts are not returnable or exchangeable because of incorrect selection, mechanic recommendation, incorrect diagnosis, suffix mismatch, opened/installed part or change of mind. Orders cannot be cancelled once placed. Eligible wrong-item or damaged-item claims require applicable proof and a complete unboxing video under store policy.

FAQs

What is 575346/F?
It is the genuine Royal Enfield clutch-release arm used in specified 650 Twin engine-cover assemblies.

Does it fit Interceptor 650?
Yes. The checked engine-cover EPC lists base 575346, qty 1.

Does it fit Continental GT 650?
Yes. The GT650 technical manual lists the 575346 clutch-release arm.

Does it fit Super Meteor 650?
Yes. The checked 2024 Super Meteor Euro 5 covers EPC lists base 575346, qty 1.

Does it fit Shotgun 650?
Yes. The checked 2024 Shotgun Euro 5 covers EPC lists base 575346, qty 1.

Is 575346/C the same as 575346/F?
They are revisions of the same base part family, but this listing does not claim universal interchangeability without packet/VIN-specific confirmation.

How many are required?
The checked EPCs show quantity 1.

Is the release shaft included?
No. The shaft is separately catalogued.

SEO Tags

Royal Enfield, Genuine Royal Enfield Parts, 575346/F, 575346F, 575346, 575346/C, 575346/B, 575346/A, ARM CLUTCH RELEASE, Clutch Release Arm, Clutch Actuation Arm, Clutch Release Cam Arm, Clutch Operating Arm, Interceptor 650, INT650, Continental GT 650, GT650, Super Meteor 650, Shotgun 650, 650 Twin, Clutch Parts, Engine Cover Parts, OEM Spares

Image Filename Suggestions

• royal-enfield-575346-f-650-twin-clutch-release-arm.jpg
• interceptor-gt650-super-meteor-shotgun-clutch-release-arm-575346-f.jpg
• royal-enfield-650-clutch-actuation-arm-575346-f.jpg

Image Alt Text

Genuine Royal Enfield 575346/F clutch release arm for Interceptor 650, Continental GT 650, Super Meteor 650 and Shotgun 650

Google Shopping Notes

Competitor Gap Analysis

Most seller listings only say “ARM - CLUTCH RELEASE.” This listing adds buyer-friendly clutch-actuation terminology, confirms four major 650 Twin applications, clearly separates the arm from the clevis, shaft, spring and bearings, documents the /C-versus-/F revision situation, and prevents unsupported blanket fitment across every newer 650 model.