Royal Enfield Breather Cover RLQ00150/A Re-Light Silver for Interceptor 650 & Continental GT 650

Product Description

Royal Enfield RLQ00150/A Cover, Breather – Re-Light Silver PC Tex is a genuine engine cover component used in the breather cover area of compatible Royal Enfield 650 Twin engines. It is commonly searched as a breather cover, engine breather cover, breather adaptor cover, cover complete breather, cast-in breather adaptor cover or 650 Twins engine cover.

This part replaces the earlier 575082/F Cover Comp, Breather reference where Royal Enfield has superseded the old number to RLQ00150/A. It is the correct OE-style replacement when the original breather cover is cracked, scraped, oxidised, damaged after a fall, leaking due to impact distortion, visually worn, or being renewed during engine cover restoration.

Use this genuine Royal Enfield cover only where RLQ00150/A, RLQ00150 or the superseded 575082/F breather cover reference is specified in the exact engine cover diagram. This is not the breather cover gasket, not the cylinder head cover, not the clutch cover, not the magneto cover and not a complete engine cover kit. Because 650 engine covers vary by finish and model specification, part-number matching is essential before ordering.

Key Features

• Genuine Royal Enfield spare part
• Part number: RLQ00150/A
• Part family reference: RLQ00150
• Supersedes / replaces earlier breather cover reference: 575082/F
• Factory description: Cover, Breather – Re-Light Silver PC Tex
• Also described as cover complete with cast-in breather adaptor in partsbook references
• Used in compatible Royal Enfield 650 Twin engine cover assemblies
• Useful for engine cover repair, fall-damage replacement, oil-seepage investigation and restoration
• OE-style finish for catalogue-matched Re-Light Silver PC Tex applications
• Better fitment accuracy than used covers, modified covers or non-OE engine cover parts

Buyer Search Names / Internal Search Keywords

Customers may also search this part as: Interceptor 650 breather cover, Continental GT 650 breather cover, Royal Enfield 650 engine breather cover, 650 Twins cover breather, RLQ00150A, RLQ00150/A, RLQ00150 cover, 575082 replacement, 575082/F replacement, breather adaptor cover, cast in breather adaptor cover, Re-Light Silver engine cover, GT 650 engine cover part, INT 650 engine cover part.

Verified Compatibility

Important Fitment Note

This listing is for the breather cover only. It is not the breather cover gasket, not the cylinder head cover, not the clutch cover, not the magneto cover, not the sprocket cover, not a bolt kit, not a gasket kit, and not a complete engine cover set.

Do not order only by motorcycle model name. Royal Enfield 650 engine covers can vary by finish, colour scheme, emission generation and engine-cover diagram. Please match RLQ00150/A or the replacement-chain reference from 575082/F before purchase.

Do not order for Classic 350, Bullet 350, Meteor 350, Hunter 350, Himalayan 411, Himalayan 450, Scram 411, Guerrilla 450, Super Meteor 650, Shotgun 650, Bear 650, Classic 650, Thunderbird, Electra, Standard or other models unless the same part number is confirmed for that exact engine cover assembly.

When Should This Part Be Replaced?

• Breather cover is cracked, broken, dented or impact-damaged
• Cover has deep scraping or cosmetic damage after a fall
• Cover seating area is distorted and causing oil seepage
• Breather cover area has been opened and the cover is no longer reusable
• Engine cover restoration requires the correct Re-Light Silver PC Tex finish
• Workshop needs the current replacement part for older 575082/F breather cover references

Why This Part Matters

The breather cover is part of the engine cover system and must sit correctly with the matching gasket and hardware. A damaged, distorted or incorrect cover can lead to poor sealing, wrong appearance, vibration issues or repeat oil-seepage complaints after assembly. Using the correct genuine Royal Enfield RLQ00150/A helps maintain factory-style fitment, finish and sealing reliability when installed with the correct gasket and hardware.

Recommended Related Parts to Check

• Breather cover gasket, especially if the cover has been opened
• Breather cover bolts and sealing washers, if rusted or rounded
• Adjacent engine cover gaskets if the engine cover area has suffered impact damage
• Breather hose / adaptor area if oil misting or seepage is present

What’s in the Box

1 x Royal Enfield Cover, Breather – Re-Light Silver PC Tex – RLQ00150/A

Gasket, bolts, washers, hoses, clamps, sealant and other engine-cover hardware are included only if specifically supplied or shown separately.

Installation Notes

• Install only after confirming the exact engine cover diagram and part number requirement.
• Use a fresh matching gasket where the service procedure requires it.
• Clean the mating surface before installation and remove old gasket residue carefully.
• Inspect cover bolts, threads, sealing surfaces and adjacent breather components.
• Do not overtighten bolts or distort the cover.
• After installation, start the motorcycle and check the breather cover area for oil seepage.
• Professional installation is recommended if the cover was damaged due to accident impact or engine-side scraping.

Return-Prevention Note

Order only if your motorcycle requires RLQ00150/A Cover, Breather – Re-Light Silver PC Tex. This part is finish-specific and assembly-specific. If your 650 Twin uses a black engine cover, modified engine cover set, or a different breather cover reference, verify the exact part number before ordering.

FAQs

What is RLQ00150/A?

RLQ00150/A is a genuine Royal Enfield breather cover described as Cover, Breather – Re-Light Silver PC Tex.

Does this fit Interceptor 650?

Yes, it is suitable for Interceptor 650 applications where the engine cover diagram specifies RLQ00150/A, RLQ00150 or the superseded 575082/F breather cover reference.

Does this fit Continental GT 650?

Yes, it is suitable for Continental GT 650 applications where the same breather cover part number is specified.

Is RLQ00150/A the replacement for 575082/F?

Yes. Royal Enfield parts references show 575082/F Cover Comp, Breather with replacement part number RLQ00150/A.

Is this the breather cover gasket?

No. This is the breather cover. The breather cover gasket is a separate part and should be ordered separately when required.

Is this a complete engine cover kit?

No. This listing includes the breather cover only. Gasket, bolts, washers and related hardware are separate unless specifically mentioned.

Can I use this on Super Meteor 650, Shotgun 650, Bear 650 or Classic 650?

Do not order for those models unless the parts catalogue confirms the same part number for that exact engine cover assembly. 650 model-family parts are not automatically interchangeable.

What does Re-Light Silver PC Tex mean?

It refers to the factory finish/colour specification used by Royal Enfield for this cover. Match this finish if the visible engine cover appearance matters.

When should I replace the breather cover?

Replace it if the original cover is cracked, distorted, badly scratched, leaking due to impact damage, visually damaged, or no longer sealing correctly.

Is this a genuine Royal Enfield part?

Yes. This listing is for genuine Royal Enfield part number RLQ00150/A.