1 0

    Royal Enfield

    Royal Enfield Genuine Rear Number Plate Support (Milky White) for Bullet/Standard UCE & Legacy Models – 845002

    Royal Enfield Genuine Rear Number Plate Support (Milky White) for Bullet/Standard UCE & Legacy Models – 845002

    Rs. 850.00
    Rs. 853.00 Rs. 850.00
    Sale Sold out
    Shipping calculated at checkout.
    Important Order Policy
    Please order only after confirming the part number, model, variant, year, side, connector type and compatibility. All orders are non-cancellable once placed. Correctly shipped spare parts are not eligible for return, exchange or refund due to wrong selection, wrong diagnosis, fitment mismatch, mechanic recommendation or change of mind. Electrical/electronic items are additionally non-returnable once opened, installed, plugged in, tested or used. Wrong item, damaged item or missing item claims require a complete unboxing video within 24 hours. Read full Return & Warranty Policy

    Product Description

    Royal Enfield 845002 Rear Number Plate Support (Milky White) is an OEM mounting plate/bracket used to hold the rear registration/number plate securely. It is commonly replaced when the original bracket cracks, breaks at mounting holes, rusts, or when a bike is being restored back to stock number-plate position.

    Also searched as: rear number plate bracket, rear number plate support, tail number plate holder, registration plate bracket, and 845002 support.

    Before you buy: This part number appears across multiple older Bullet/Standard/Electra/Thunderbird-era parts catalogs. Because rear fender and tail lamp carrier designs vary, verify by VIN/EPC or match by photo (mounting hole positions and tail-end bracket interface) before ordering.

    Key Features

    • Genuine Royal Enfield rear number plate support bracket in Milky White
    • Restores stock number plate mounting position and stiffness
    • Direct replacement for bent, cracked, or corroded rear plate supports
    • Helps reduce plate vibration and rattling when mounted correctly
    • Correct part number 845002 for accurate sourcing
    • Useful for restoration builds and workshop replacement stock
    • Designed for OE tail end assemblies—verify hole spacing before purchase

    Compatibility Table 

    Model Platform/Engine BS/Emission Years Status (✅/❓) Notes/Constraints
    Bullet 350 / Standard 350 (legacy & UCE) Cast iron / UCE — Multiple ❓ One dealer listing maps 845002 across multiple Bullet/Standard-era models. Confirm by VIN/EPC or match hole spacing.
    Electra / Thunderbird (older) — — Multiple ❓ Dealer listing includes Electra/Thunderbird families; verify tail-end bracket design before ordering.
    Modern J-Series / 650 / Himalayan — — — ❓ Not confirmed and typically different carriers; do not order for these platforms.

    Explicit exclusions (return-prevention): Not confirmed for J-Series 350 (Classic Reborn/Meteor/Hunter/Bullet J), 650 Twins, Himalayan/Scram. Buy only after VIN/EPC confirmation or mounting-hole photo match for 845002.

    ONLY BUY AFTER CHECKING PART NUMBER 

    Variants

    No variants (single unit).

    FAQs

    Q1 (Fitment): Why is 845002 marked unverified?

    Public sources show 845002 across many older models, but rear fender/tail assemblies vary. To prevent returns, confirm 845002 in your VIN-based EPC or match by photo/hole spacing.

    Q2 (Fitment): How can I verify hole spacing?

    Measure center-to-center distance of the mounting holes on your old bracket (or the rear fender carrier holes) and compare with the replacement before installation.

    Q3 (Comparison): OEM support vs universal number plate holders—what’s better?

    OEM keeps the plate in the correct stock position and aligns with the tail assembly. Universal holders often need drilling and can vibrate or misalign.

    Q4 (Installation): Any tips for installation?

    Use correct fasteners and washers, ensure the bracket sits flat, and tighten evenly to prevent cracking at the holes.

    Q5 (Symptoms): What issues does a damaged plate support cause?

    Rattling number plate, loose mounting, cracked holes, or the plate sitting at an incorrect angle.

    Q6 (Returns-prevention): What should I share before ordering?

    Share a rear-end photo showing the mounting area and hole positions, plus model/year/engine type (CI or UCE) or VIN/EPC screenshot.

     

    Verify Fitment on Official Brand Portals

    For selected genuine spare parts, you can cross-check the part number on the official brand portals before ordering.

    Royal Enfield Official Spares Portal

    Hero MotoCorp Official eCatalogue

    View full details