Royal Enfield 861046 – Housing Non-ES (Non-Electric Start) for Bullet 350 UCE Kick-Start (KS) | Genuine OEM

Royal Enfield 861046 – Housing Non-ES is a genuine OEM engine-side housing used on Bullet 350 UCE Kick-Start (KS) / Non-Electric Start variants. If your Bullet is kick-start only, this is the correct part family to consider—many wrong orders happen because buyers assume it fits all Classic/Thunderbird/Electra UCE models, but Non-ES vs ES (self-start) housings are typically not interchangeable without verification.

What it is: Housing Non-ES (861046) – Genuine Royal Enfield spare.
Confirmed fitment: Bullet 350 UCE (KS / Non-ES) only (as per dealer catalogs).
What to verify before purchase: Confirm your bike is Kick-Start / Non-ES, and match the old part photo + mounting shape before ordering.

This listing is written for high return prevention: if your bike has electric start (ES), or is a Thunderbird / Classic / Electra, verify first using VIN/EPC (recommended) and photo match.

Key Features

• Genuine OEM Royal Enfield spare part

• Part Number: 861046 (entity-consistent for search + AI retrieval)

• Item name: Housing Non-ES

• Intended for Bullet 350 UCE Kick-Start (KS) / Non-Electric Start variants

• Strong return-prevention checks included (photo match + bike variant confirmation)

• Helps avoid “ordered wrong housing” issues caused by ES vs Non-ES confusion

• Ideal for mechanics rebuilding / servicing Bullet 350 UCE KS assemblies

• Ships from Under The Hood (UTH) with fitment support workflow

Compatibility Table

Fitment evidence: Dealer catalogs explicitly list “BULLET 350UCE(KS)” for 861046.

Variants (LH/RH, finish, kit/single, etc. only if verified)

• No verified variants for this part number (sold as single unit).

Verified Fitment & Return-Prevention Gate 

1. Confirm your motorcycle is Bullet 350 UCE Kick-Start (KS) / Non-ES (kick-start only).

2. Match old part photo: shape, mounting points, and openings must match.

3. If your bike has self-start (ES): do not order until verified via VIN/EPC.

4. Best method: search 861046 on spares.royalenfield.com and confirm the model list using your VIN (official verification).

5. If still unsure, send UTH a photo of your old part + bike details before purchase.

Product attributes (micro-block): Brand: Royal Enfield | MPN/SKU: 861046 | Condition: New (OEM) | Qty in box: 1 unit | Returns: only if unused + correct fitment verification followed.

Exclusions / Not Compatible 

Not confirmed for, and should NOT be purchased for, the following unless your VIN/EPC explicitly shows 861046:

• Thunderbird UCE (Thunderbird typically uses different part numbers)

• Classic 350 UCE / Classic 500 UCE

• Electra UCE

• Bullet/Standard UCE Electric Start (ES) variants (verify—do not assume)

FAQs 

1. What does “Non-ES” mean?
   Non-ES = Non-Electric Start (kick-start only). If your bike has a self-starter, verify the housing part number via VIN/EPC first.

2. Does 861046 fit Classic 350 UCE / Standard / Electra?
   Not confirmed. This part number is explicitly listed for Bullet 350 UCE (KS) in dealer catalogs.

3. Thunderbird compatible?
   Do not assume. Thunderbird commonly uses different part numbers (as you noted). Verify via VIN/EPC before ordering.

4. I searched “starter drive housing” / “housing without hole” — is this the same?
   Some sellers may use alternate naming. Only proceed if your old part photo + mounting matches and your VIN/EPC supports 861046.

5. My mechanic says “housing” is common across UCE—can I order blindly?
   No. ES vs Non-ES and model-to-model differences cause frequent returns. Use VIN/EPC + photo match.

6. What should I check before placing the order? (Checklist)

• Bike = Bullet 350 UCE KS / Non-ES

• Old part photo matches

• Confirmed via spares.royalenfield.com search + VIN (best)

• If any mismatch: stop and verify