Royal Enfield Bank Angle Peg Footrest 1030035/A for Interceptor 650

Product Description

Royal Enfield 1030035/A Footrest, Bank Angle Peg is a genuine Royal Enfield foot control component used on catalogue-matched footrest / foot control assemblies where this exact part number is specified. It is commonly searched as Interceptor 650 bank angle peg, footrest bank angle peg, foot peg feeler, foot peg slider, rider footrest peg, footrest feeler bolt or Royal Enfield 1030035/A.

The bank angle peg is a small replaceable peg fitted in the footrest/foot control area. It acts as a wear/contact peg on the footrest area and is commonly replaced when it is worn down, missing, bent, scraped, damaged after a fall, or removed during previous footrest work.

Bike-Parts Royal Enfield identifies 1030035/A as FOOTREST, BANK ANGLE PEG and confirms it as a genuine Royal Enfield spare part. The same assignment page shows it under Interceptor 650 Twin Euro 4 – Foot Controls. The Bike-Parts price list also shows surrounding foot-control components such as rider control plates, gear shifter pedal, brake pedal and footrest-related hardware near this part number family.

Use this genuine Royal Enfield part only where 1030035/A is specified in the exact foot controls parts catalogue. This is not the complete footrest assembly, not the rider control plate, not the gear shifter pedal, not the brake pedal, not the footrest rubber and not a universal foot peg for every Royal Enfield model.

Key Features

• Genuine Royal Enfield spare part
• Part number: 1030035/A
• Factory description: Footrest, Bank Angle Peg
• Small replaceable footrest / foot control wear peg
• Confirmed under Interceptor 650 Twin Euro 4 foot controls reference
• Useful for replacing scraped, missing, bent or worn bank angle pegs
• Helps restore the original footrest detail where the catalogue specifies this peg
• Better fitment confidence than generic footrest feeler pegs
• Best ordered by exact part number and foot control diagram match

Buyer Search Names / Internal Search Keywords

Royal Enfield 1030035/A, 1030035A, 1030035, footrest bank angle peg, bank angle peg, foot peg feeler, footrest feeler bolt, Interceptor 650 footrest peg, INT 650 bank angle peg, rider footrest peg, foot peg slider, Royal Enfield foot control peg.

Verified Compatibility

Important Fitment Note

This listing is for the footrest bank angle peg only. It is not the complete footrest, not the rider control plate, not the gear shifter pedal, not the brake pedal, not the footrest rubber, not a footrest bracket and not a complete foot control kit.

Do not order only by visual appearance. Small footrest parts can differ by thread size, length, mounting point, side, model generation and control plate design. Match 1030035/A in the exact Royal Enfield foot controls catalogue before ordering.

Do not list Continental GT 650, Super Meteor 650, Shotgun 650, Bear 650, Classic 650, Classic 350, Bullet 350, Meteor 350, Hunter 350, Himalayan, Scram or other Royal Enfield models as confirmed unless the exact parts catalogue confirms 1030035/A for that motorcycle.

1030035/A vs Similar Foot Control Parts

When Should This Bank Angle Peg Be Replaced?

• Original bank angle peg is scraped or worn down
• Peg is bent or damaged after a fall
• Peg is missing from the footrest/control plate area
• Footrest assembly is being restored to original condition
• Workshop wants genuine Royal Enfield footrest hardware instead of generic pegs

Recommended Related Parts to Check

• Rider footrest condition
• LH/RH rider control plates
• Gear shifter pedal and linkage if left side was impacted
• Brake pedal if right side was impacted
• Mounting threads in the footrest/control plate area

What’s in the Box

1 x Royal Enfield Footrest, Bank Angle Peg – 1030035/A

Footrest assembly, rider control plates, gear shifter pedal, brake pedal, mounting hardware and other foot control parts are included only if specifically supplied separately.

Installation Notes

• Confirm the mounting point and thread condition before installation.
• Do not force the peg into damaged threads.
• Use suitable thread locking / tightening practice as per workshop procedure.
• If the peg was damaged in a fall, inspect the complete footrest and control plate area.
• After installation, confirm the peg is secure and not loose.

Return-Prevention Note

Order only if your motorcycle requires 1030035/A Footrest, Bank Angle Peg. This is a small footrest bank-angle peg and should not be confused with complete footrests, footrest brackets, rider control plates, gear shifter pedals or brake pedals.

FAQs

What is Royal Enfield 1030035/A?

1030035/A is a genuine Royal Enfield Footrest, Bank Angle Peg.

Does 1030035/A fit Interceptor 650?

Yes, Bike-Parts Royal Enfield shows 1030035/A under Interceptor 650 Twin Euro 4 foot controls. Use it where the exact foot controls catalogue specifies 1030035/A.

Is this a complete footrest?

No. This is only the small bank angle peg / footrest feeler peg, not a complete footrest assembly.

Is this left side or right side?

The source identifies it as a footrest bank angle peg. Confirm the exact mounting location from the foot controls diagram before ordering if side-specific installation is critical.

Does it fit Continental GT 650?

Do not list Continental GT 650 as confirmed unless the exact Continental GT 650 foot controls catalogue confirms 1030035/A.

Is this genuine Royal Enfield?

Yes. Bike-Parts Royal Enfield identifies 1030035/A as a certified Royal Enfield genuine spare part.