Royal Enfield Front Mudguard Stay Matte Textured Black RAG00789/A for Bear 650

Royal Enfield RAG00789/A Stay Assembly, Front MG, Matte Textured Black is a genuine front mudguard support stay used in compatible Royal Enfield Bear 650 front mudguard assemblies. It is commonly searched as a front mudguard stay, front fender stay, mudguard support stay, front mudguard bracket, front fender support bracket or Bear 650 front mudguard support.

This stay assembly forms part of the Bear 650 front mudguard structure and helps support the mudguard area in its correct factory position. It is the correct OE-style replacement when the original front mudguard stay is bent, cracked, scratched, rusted, missing, damaged after front-end impact, or removed during front mudguard repair.

Use this genuine Royal Enfield stay only where RAG00789/A or RAG00789 is specified in the front mudguard parts diagram. It is not the glossy black front mudguard brace RAG00790/A, not the complete front mudguard, not the fork guard, not the front mudflap, and not a complete front fender kit. Because front mudguard support parts can look similar but use different positions, finishes and mounting points, part-number matching is essential before ordering.

Key Features

• Genuine Royal Enfield spare part
• Part number: RAG00789/A
• Part family reference: RAG00789
• Factory description: Stay Assembly, Front MG, Matte Textured Black
• Designed for compatible Bear 650 front mudguard applications
• Matte textured black finish for catalogue-matched front mudguard stay position
• Commonly searched as front mudguard stay, front fender stay and mudguard support bracket
• Useful for front mudguard repair, accident repair, cosmetic restoration and workshop stock
• OE-style fitment where the parts catalogue specifies RAG00789/A or RAG00789
• Better fitment accuracy than universal brackets or locally fabricated mudguard stays

Buyer Search Names / Internal Search Keywords

Customers may also search this part as: Bear 650 front mudguard stay, Bear 650 front fender stay, Royal Enfield mudguard stay, RAG00789A, RAG00789/A, RAG00789 front mudguard stay, matte textured black front mudguard stay, front mudguard support bracket, Bear 650 mudguard support, Royal Enfield front mudguard assembly part.

Verified Compatibility

Important Difference: RAG00789/A vs RAG00790/A

RAG00789/A is the Stay Assembly, Front MG, Matte Textured Black. RAG00790/A is the Mudguard Brace Assembly, Front, Glossy Black. These are different front mudguard parts and should not be interchanged unless the parts diagram specifically confirms the required part number.

Important Fitment Note

This listing is for the front mudguard stay assembly only. It is not the front mudguard, not the front mudguard brace RAG00790/A, not the front mudflap, not the fork guard LH, not the fork guard RH, not the mudguard extension, not the shoulder bolt set, and not a complete front mudguard kit.

Do not order only by visual appearance. Front mudguard stays, braces and support brackets can look similar but may differ in mounting-hole position, bend profile, finish, fork clearance and model-specific layout. Please match RAG00789/A before purchase.

Do not order for Interceptor 650, Continental GT 650, Super Meteor 650, Shotgun 650, Classic 650, Classic 350, Bullet 350, Meteor 350, Hunter 350, Himalayan 450, Guerrilla 450, Himalayan 411, Scram 411, Thunderbird, Electra or Standard models unless the parts diagram confirms the same RAG00789/A front mudguard stay requirement for that exact motorcycle.

When Should This Part Be Replaced?

• Front mudguard stay is bent, cracked or broken
• Stay has scratches, rust, finish damage or impact marks
• Front mudguard is not sitting correctly due to stay/support damage
• Motorcycle has had a front-end fall or mudguard-side impact
• Front fender assembly has been opened for repair or replacement
• Workshop needs the correct Bear 650 matte textured black stay instead of a universal mudguard support

Why This Part Matters

The front mudguard stay helps keep the front mudguard assembly correctly supported and aligned. A bent or incorrect stay can cause poor mudguard seating, uneven clearance, vibration, rubbing risk, poor front-end appearance or difficulty fitting related front mudguard parts. Using the correct genuine Royal Enfield RAG00789/A helps maintain factory fitment and a clean front mudguard setup on compatible Bear 650 motorcycles.

Recommended Related Parts to Check

• Front mudguard panel
• Front mudguard brace RAG00790/A
• Fork guard LH and RH
• Front mudflap
• Top-hat mudguard extensions
• Shoulder bolts and mounting fasteners
• Fork-side mounting points after impact damage

What’s in the Box

1 x Royal Enfield Stay Assembly, Front MG, Matte Textured Black – RAG00789/A

Front mudguard, front mudguard brace, fork guards, mudflap, bolts, shoulder bolts, washers, grommets and other front mudguard hardware are included only if specifically supplied or shown separately.

Installation Notes

• Install with the motorcycle safely supported and the front wheel/fork area accessible.
• Inspect the front mudguard, brace, fork guards, mudflap, mounting bolts and fork-side mounting points during installation.
• Replace bent, rusted or damaged hardware separately if required.
• Do not force-fit if mounting holes do not align naturally.
• Check tyre clearance and mudguard alignment before riding.
• Professional installation is recommended if the motorcycle has front-end impact damage or fork/mudguard misalignment.

Return-Prevention Note

Order only if your motorcycle requires RAG00789/A Stay Assembly, Front MG, Matte Textured Black. This is a Bear 650 front mudguard stay part and should not be confused with RAG00790/A glossy black front mudguard brace, the mudguard panel, fork guards, mudflap or full front fender kit.

FAQs

What is RAG00789/A?

RAG00789/A is a genuine Royal Enfield Stay Assembly, Front MG, Matte Textured Black used where this part number is specified in the front mudguard assembly.

Does this fit Royal Enfield Bear 650?

Yes, it is suitable for Bear 650 front mudguard applications where RAG00789/A or RAG00789 is specified in the parts catalogue.

Is this the same as RAG00790/A?

No. RAG00789/A is the matte textured black front mudguard stay. RAG00790/A is the glossy black front mudguard brace. They are different parts.

Is this the complete front mudguard?

No. This listing is for the front mudguard stay only. The front mudguard panel is a separate part.

Is this the fork guard?

No. Fork guards are separate LH/RH parts. This listing is only for the matte textured black front mudguard stay assembly.

Is this the front mudflap?

No. The front mudflap is a separate part with a different part number.

Does it include bolts or mounting hardware?

Bolts and mounting hardware are included only if specifically supplied or shown separately. Inspect and replace damaged hardware during installation.

Can I use this on Interceptor 650, Continental GT 650 or Super Meteor 650?

Do not order for those models unless the exact front mudguard parts diagram confirms RAG00789/A. Royal Enfield 650-family parts are not automatically interchangeable.

When should I replace the front mudguard stay?

Replace it if it is bent, cracked, rusted, scratched, missing, damaged after impact, or causing poor front mudguard alignment.

Is this a genuine Royal Enfield part?

Yes. This listing is for genuine Royal Enfield part number RAG00789/A.