Royal Enfield Bear 650 / Interceptor 650 / Continental GT 650 Black Suspension Finishers – 1990445

Genuine Royal Enfield accessory part 1990445. A two-piece rear suspension mount finisher kit machined from billet aluminium, finished in black anodising and laser-etched with Royal Enfield branding. Designed to give the upper rear shock/RSU mounting points a cleaner factory-accessory finish.

What It Is

This is a pair of decorative finishers for the left- and right-hand upper rear suspension mounting points. The supplied fixings replace the original upper shock fasteners while the original washers are reused.

What It Is Not

This is not a pair of shock absorbers, a suspension upgrade, a lowering kit, a lift handle, pannier hardware or a universal trim kit. It does not change spring rate, damping or ride height.

Highlights

• Genuine Royal Enfield accessory
• Exact manufacturer part number: 1990445
• Machined billet-aluminium construction
• Black anodized finish
• Laser-etched Royal Enfield branding
• Pair supplied for both sides of the motorcycle
• Factory-designed fit at the rear suspension top mounts

Verified Specifications

• Product name: Black Suspension Finishers / Rear Suspension Mount Finisher Kit
• Manufacturer: Royal Enfield
• MPN: 1990445
• Material: Aluminium
• Colour: Black
• Finish: Anodized
• Location: Rear suspension upper mounting points
• Instruction number: KXL00091, Issue B
• Specified finisher-fixing torque: 22 Nm

Confirmed Fitment

• Royal Enfield Bear 650
• Royal Enfield Interceptor 650 / INT 650
• Royal Enfield Continental GT 650

Royal Enfield's current product information confirms all three model families. The fitting instruction specifically identifies Continental GT 650 and Interceptor/INT 650 models from 2018 onward.

Check Before Ordering

• Match the motorcycle model and accessory part number 1990445.
• Inspect the upper rear suspension mounts and confirm they retain the standard mounting arrangement.
• If non-standard shock absorbers or mounting hardware are installed, confirm physical compatibility before purchase.
• Check that no lift handle or accessory pannier mounts are fitted or planned.

Not Compatible / Important Exclusions

Do not fit this kit while a lift handle or accessory pannier mounts are fitted. The official instructions require the lift handle to be removed and retained if the finishers are installed. Compatibility with aftermarket shocks, custom frames or non-standard upper shock hardware is not confirmed.

Related Comparison

Choose part 1990445 when you need the black genuine Royal Enfield finishers for the listed 650 models. Do not confuse this kit with rear shock absorbers, lower shock covers, swingarm hardware, grab rails, lift handles or pannier mounting kits; those products serve different purposes and may occupy the same mounting area.

Purpose

The kit visually tidies the exposed upper rear suspension fasteners and adds a subtle branded black finish while retaining the motorcycle's functional suspension arrangement.

Box Contents

• 2 × suspension mount finishers
• 2 × replacement fixings

The motorcycle's original washers are reused. No shock absorbers, washers, lift handle, pannier mounts or tools are included.

Installation

Support the motorcycle securely. Work on one side at a time, remove the original upper rear suspension fixing, retain the original washer, place the finisher at the mount and install the supplied fixing. Tighten each supplied fixing to the official 22 Nm specification and repeat on the opposite side. Royal Enfield lists 12 mm bi-hexagonal and 6 mm Allen tools in the procedure. If in doubt, use an authorised Royal Enfield technician.

Care and Safety

• Use suitable tools and a calibrated torque wrench.
• Never remove both upper suspension mount fixings at the same time.
• Do not use abrasive cleaners on the anodized surface.
• Recheck installation security after fitting and ride cautiously after any accessory installation.

Return Prevention — Please Verify Before Purchase

Confirm part number 1990445, motorcycle model, mounting arrangement and absence of a lift handle/accessory pannier mounts before ordering. A correctly supplied item is not returnable. Replacement is considered only for a wrong or transit-damaged item when reported within 24 hours of delivery with a complete, clear and uninterrupted unboxing video. Installed, marked, scratched, modified, used or incomplete items are not returnable. Orders cannot be cancelled after processing.

Why Buy from Under The Hood

• Part-number-led listing written to reduce fitment mistakes
• Confirmed application and exclusions stated clearly
• Genuine-item identification and careful dispatch checks
• India-based support for Royal Enfield owners and workshops

Buyer Search Terms

Royal Enfield 1990445, Bear 650 suspension finisher, Interceptor 650 shock mount cover, INT 650 rear suspension finisher, Continental GT 650 suspension cap, black RSU finisher, rear shock top mount cover, genuine Royal Enfield 650 accessory, billet aluminium suspension trim.

Frequently Asked Questions

1. What is Royal Enfield part 1990445?

It is the genuine black rear suspension mount finisher kit for the listed Royal Enfield 650 models.

2. Which motorcycles are confirmed compatible?

Bear 650, Interceptor 650 / INT 650 and Continental GT 650 are confirmed by Royal Enfield's current product information.

3. Is this compatible with the Bear 650?

Yes. Bear 650 is included in Royal Enfield's current compatibility list.

4. Does it fit the Interceptor 650?

Yes. It is listed for Interceptor 650 / INT 650; the fitting instruction identifies 2018-onward models.

5. Does it fit the Continental GT 650?

Yes. The official fitting instruction identifies Continental GT 650 models from 2018 onward.

6. Is this a pair?

Yes. The kit contains two finishers, one for each side.

7. Are fixings included?

Yes. Two replacement fixings are included.

8. Are washers included?

No. The official procedure reuses the motorcycle's original washers.

9. Are shock absorbers included?

No. This is a cosmetic mount-finisher kit, not a shock absorber set.

10. What material are the finishers?

Royal Enfield specifies machined billet aluminium.

11. What colour and finish are they?

They are black with an anodized finish and laser-etched Royal Enfield branding.

12. Where are they installed?

They install at the left- and right-hand upper rear suspension/RSU mounting points.

13. What torque is specified?

The supplied finisher fixings are tightened to 22 Nm in the official instruction.

14. Can they be used with a lift handle?

No. The official instruction states that the kit must not be fitted with a lift handle installed.

15. Can they be used with accessory pannier mounts?

No. Royal Enfield states that the kit must not be fitted when accessory pannier mounts are fitted.

16. Will they fit aftermarket rear shocks?

Compatibility is not confirmed. Compare the upper mount and hardware with the standard arrangement before ordering.

17. Do they improve suspension performance?

No. They are visual finishers and do not alter damping, spring rate or ride height.

18. Can I install them myself?

A competent owner with the correct tools and torque wrench may follow the official instructions; otherwise use an authorised technician.

19. Is the part number shown on the listing exact?

Yes. The manufacturer part number and variant SKU are both 1990445.

20. What should I verify before ordering?

Confirm the bike model, standard upper suspension mounting arrangement, part number 1990445 and that no lift handle or accessory pannier mounts are fitted.