Royal Enfield Black Tapered Mirror Pair – KXA00276

Upgrade the view behind your motorcycle without converting to bar-end mirrors. The genuine Royal Enfield KXA00276 Black Tapered Mirrors are a left-and-right pair of conventional stalk-mounted rear-view mirrors for selected current Royal Enfield 350, 450 and 650 models.

Each mirror uses a sculpted teardrop shape, black finish, aluminium stem and laser-etched Royal Enfield branding. Royal Enfield describes the fully homologated design as providing enhanced strength and stability on long rides together with a wider field of visibility.

Important product distinction: KXA00276 is the regular stalk-mounted mirror pair. It is not the KXA00281 Black Tapered Bar-End Mirror set. KXA00276 fits at the motorcycle's standard mirror positions and does not require the KXA00125 or KXA00277 bar-end mirror mounting kits.

What This Product Is

• Genuine Royal Enfield Black Tapered Mirror pair
• Exact part number / manufacturer part number: KXA00276
• One left-hand mirror and one right-hand mirror
• Conventional stalk-mounted design for the original mirror positions
• Sculpted teardrop-shaped mirror housings
• Black finish with aluminium stems
• Laser-etched Royal Enfield branding
• Fully homologated genuine-accessory mirror design

Key Features

• Direct factory-accessory styling for compatible Royal Enfield motorcycles
• Tapered teardrop profile offers a more contemporary look than round standard mirrors
• Royal Enfield-designed wider field of visibility for a clearer view of the road behind
• Aluminium stems are intended to improve strength and stability on longer rides
• Supplied as a matched left-and-right pair
• Uses the motorcycle's conventional upper mirror mounting positions
• No separate bar-end mirror mount kit is required
• Laser-etched Royal Enfield branding provides a genuine finish
• Adjustable mirror heads allow the rider to set a suitable rearward view
• Manufacturer-listed three-year warranty, subject to Royal Enfield's applicable terms

Confirmed Compatibility

Compatibility assumes standard, undamaged mirror mounting points and the correct original or approved Royal Enfield handlebar controls. A current model name alone is not enough when the motorcycle has aftermarket perches, levers, handlebars, risers, handguards or mirror-thread adapters.

Fitment Note / Return Prevention

Verify the part number KXA00276, motorcycle model, model generation and VIN before opening the package. The current Royal Enfield compatibility list covers the models above; it does not confirm older motorcycles that happen to use a visually similar mirror thread.

• Do not order for Himalayan 411, Scram 411, UCE Classic/Bullet/Electra, Thunderbird or Continental GT 535 unless Royal Enfield confirms KXA00276 against the VIN.
• Do not purchase KXA00125 or KXA00277 for this installation. Those are bar-end mounting kits used with bar-end mirror products such as KXA00281.
• Do not force a mirror stem into a thread that does not start freely by hand.
• Do not add universal thread adapters unless Royal Enfield or a qualified technician confirms them for the motorcycle.
• Aftermarket control perches, brake master cylinders, clutch assemblies, handlebars or risers can change compatibility and clearance.
• Mirror parts that show wrench marks, thread damage, cross-threading, scratches, impact, alteration or road use may not qualify for return, subject to applicable law and the current store policy.

Record one continuous unboxing video showing the sealed parcel, shipping label, Royal Enfield label, both mirror heads, both stems, mirror glass and branding. Report a wrong, missing or transit-damaged item within 24 hours with the video and original packaging.

What You Will Receive

The supply is one genuine matched mirror pair sold under part number KXA00276. Motorcycle, tools, labour and unrelated accessories are not included.

KXA00276 Versus KXA00281

Both designs use a similar teardrop styling theme, so checking the SKU is essential. If your desired mirror must sit at the handlebar end, KXA00276 is not the correct part.

Technical Details

Installation Note

Royal Enfield's KXA00276 instruction page directs the installer to the motorcycle owner's manual. Mirror removal direction, lock-nut arrangement and tightening procedure can differ by model and side, so no universal thread direction or torque value is claimed in this listing.

1. Park the motorcycle securely on level ground and switch off the ignition.
2. Confirm KXA00276 against the motorcycle model and VIN before removing the original mirrors.
3. Follow the relevant owner's manual for removing the original left and right mirrors.
4. Keep track of model-specific lock nuts, boots, spacers and washers; do not mix sides.
5. Start each new mirror thread by hand. Stop immediately if there is resistance or misalignment.
6. Set both stems so they clear the controls, screen, fuel tank and rider's hands.
7. Tighten using the method and torque specified for the motorcycle. Do not tighten by twisting the mirror housing.
8. Turn the handlebar fully left and right and confirm there is no contact or cable tension.
9. Sit in the normal riding position and adjust both heads for a clear rearward view.
10. Check that the front brake, clutch, throttle and switches operate normally before riding.
11. Recheck mirror security and adjustment after the first ride and periodically thereafter.

Installation by an authorised Royal Enfield workshop or qualified motorcycle technician is recommended, especially when the motorcycle has non-standard cockpit parts.

Visibility, Safety and Legal Note

Royal Enfield describes these mirrors as fully homologated and designed to provide a wider field of visibility. Correct adjustment is still rider-specific. Both mirrors must provide a stable, unobstructed rearward view before the motorcycle is used.

• Do not ride with loose, cracked, severely scratched or incorrectly adjusted mirrors.
• Confirm each housing remains clear of the rider's hands, levers, cables and switchgear.
• Check full steering-lock clearance with screens, phone mounts, handguards and luggage fitted.
• Comply with local rules governing mirror quantity, placement and reflective area.
• Replace damaged mirror glass or a bent stem rather than attempting a temporary repair.

Care and Periodic Inspection

• Clean the mirror glass with a soft microfibre cloth and a suitable non-abrasive glass cleaner.
• Use mild soap and water on the black housings and stems; avoid aggressive solvents.
• Do not direct a pressure-washer jet at the mirror-head joint, stem base or protective boots.
• Check the stem lock nuts, mirror position and housing security during routine maintenance.
• After a fall or impact, inspect both mirrors, mounting threads, controls and handlebar before riding.
• Do not use the mirror stems as tie-down points or handles when moving the motorcycle.

Pre-Purchase Checklist

1. Confirm the required SKU is KXA00276.
2. Confirm the motorcycle appears in the compatibility table.
3. For Classic 350 or Bullet 350, confirm the current J-series generation.
4. For Himalayan, confirm it is Himalayan 450 rather than Himalayan 411.
5. Check that the original mirror mounting positions and threads are present and undamaged.
6. Identify any aftermarket lever perch, master cylinder, handlebar, riser, screen or handguard.
7. Confirm you want conventional stalk-mounted mirrors rather than KXA00281 bar-end mirrors.
8. Ask for a VIN-based check if the model, year or market specification is uncertain.

Frequently Asked Questions

1. What is Royal Enfield KXA00276?

It is the genuine Royal Enfield Black Tapered Mirror set for the conventional mirror positions on selected current 350, 450 and 650 models.

2. Is the listing for one mirror or a pair?

It is a left-and-right pair: one mirror for each side of the motorcycle.

3. Are these bar-end mirrors?

No. KXA00276 is the regular stalk-mounted version. KXA00281 is the tapered bar-end mirror version.

4. Do I need KXA00125 or KXA00277 mounts?

No. Those are bar-end mounting kits and are not required for the standard stalk-mounted KXA00276 pair.

5. Does KXA00276 fit Classic 350?

Yes, Royal Enfield lists Classic 350. This listing is for the current J-series model, not an older UCE Classic unless VIN-confirmed.

6. Does it fit Bullet 350?

Yes, Royal Enfield lists the current Bullet 350. Confirm the J-series generation before ordering.

7. Does it fit Hunter 350 and Meteor 350?

Yes. Both Hunter 350/HNTR 350 and Meteor 350 appear in Royal Enfield's compatibility list.

8. Does it fit Goan Classic 350?

Yes. Goan Classic 350 is included in the official compatibility list; a VIN check is still recommended.

9. Does it fit Himalayan 450?

Yes, Himalayan 450 is officially listed. This does not establish fitment for Himalayan 411.

10. Does it fit Guerrilla 450?

Yes. Guerrilla 450 appears in Royal Enfield's current compatibility list.

11. Does it fit Interceptor 650 or Continental GT 650?

Yes. Royal Enfield lists both INT/Interceptor 650 and Continental GT 650.

12. Does it fit Super Meteor 650 or Shotgun 650?

Yes. Both 650 models are confirmed on the official product page.

13. Does it fit Bear 650, Classic 650 or Bullet 650?

Yes. All three are currently listed by Royal Enfield. For the newer Classic 650 and Bullet 650, verify the VIN and market catalogue.

14. Does it fit Himalayan 411 or Scram 411?

Not confirmed by the official KXA00276 product listing. Do not order for those models without VIN-specific approval.

15. What material is used?

Royal Enfield lists aluminium as the product material and specifically describes aluminium stems.

16. Are the mirrors homologated?

Royal Enfield describes KXA00276 as fully homologated. The rider must still follow local road rules and adjust both mirrors correctly.

17. Do the mirrors carry Royal Enfield branding?

Yes. The teardrop-shaped mirrors feature laser-etched Royal Enfield branding.

18. Is installation plug-and-play?

They are intended for the standard mirror positions on compatible models, but removal direction and tightening procedure must follow the relevant owner's manual.

19. Is there a warranty?

The official product page lists a three-year warranty, subject to Royal Enfield's regional warranty terms, installation requirements and claim conditions.

20. Can the mirrors be returned after fitting?

Installed or marked mirrors may not qualify for return. Verify the SKU, model, generation, VIN and mounting condition before installation, subject to applicable law and the current store policy.